Every hero needs a villain, and for the Teenage Mutant Ninja Turtles that number one villain is The Shredder. Setup as a foil in his original appearance, Shredder really became the main guy when the cartoon series was put into development. That show needed a villain who was always around and Shredder was the best choice. Ever since, he’s basically remained in that role with few exceptions so whenever a new company steps in to put their stamp on the franchise they usually bring old Shred-head along with them.
He’s a little Shredder.
JoyToy’s 1:18 scale line of Teenage Mutant Ninja Turtles action figures got off to a strong start with the four turtle boys. Whenever I approach a new take on the property, I always like to start with the turtles and Shredder. If I really like what I’m seeing then I’ll start to fill in my collection. Shredder is the seventh character in this line to go up for order and my fifth addition. Though technically I committed to Bebop and Rocksteady first, but they haven’t shipped (I think I’m going to have to change vendors). I’m fine with that though as when I first saw JoyToy’s take on the turtles I really wanted to see their Shredder. And once he was unveiled it turns out he looks pretty familiar.
These turtles scale much bigger than typical turtles.
Shredder arrives in the same style of box as the turtles. His design is that of a heavily armored Shredder and, for me, it’s impossible not to get 2k3 vibes from this figure. He has huge shoulder pads, a slim face, and a sash fashioned with the red Shredder logo from that show. He’s basically all silver and black and his eyes are little white points in the blackness of his helm. The main difference between the two designs is the texture of the armor of this figure is a bit more realistic and also weathered, to a degree. And his eyes aren’t red. The number of blades on the shins and forearms is different and this Shredder has a fashionable, purple, cape and sash.
And if JoyToy is indeed going to copy that 2003 look of the villain then that’s a pretty good one to copy. I love Shredder in that show and I was really impressed with his portrayal back then so this is a great foundation for this figure. It’s a lot of colored plastic, but there’s a dark wash applied to grime the figure up a bit. There is some white on the sleeves which is oddly placed, but the metallic armor does a decent job of selling the illusion of metal. The one aspect of the presentation I’m a little down on is the height. At 4.25″ this Shredder isn’t much taller than the turtles who stood right around 4″. This puts Shredder at about 6.375′ if he were a real person. That’s well above average and seems about right for Shredder so I guess my issue is more with the height of the turtles, not Shredder.
I don’t know what these weapons are, but they’re pretty gnarly.Ninja stars? Why not?
Shredder comes with a bunch of stuff, some expected, some familiar, and plenty new. For hands, Shredder has gripping, tighter gripping, and bladed. The bladed hands are fists with his customary blades that are held affixed to a band that slide over his fingers. They look cool, but if you want to utilize his weapons then you’ll have to go with the gripping hands. And for weapons, Shredder has a katana, a short sword, and a pair of double-bladed weapons. The curved nature of the bladed portions makes me think of the weapon included with the Playmates turtles that resembled a hook of sorts, even though it’s a different shape this time around. Shredder does not have storage for those, or technically any weapons. He has a pair of scabbards on his belt, but they have dummy handles that plug into them. The scabbards are a bit warped from the package so maybe that’s why? I’m surprised they don’t just function as intended. There’s also a pair of throwing stars which work well with the tighter gripping hands and Shredder also comes with a disc stand with his own logo on it. Like the turtles, he has a quadrant of a larger display stand. This one is made of white “stone” with a center manhole so it’s different from what the turtles came with which is cool. I’ll need more figures if I want to make a whole base.
He has better range going out to the sides at the hips than the turtles, but kicking forward is still an issue.
Articulation for Shredder is similar to the turtles, but also different. The head feels like a double ball peg and the softness of the helm allows for a decent range of motion. The ball hinge shoulders work fine and the shoulder pads are soft and can be dealt with there. Peg and hinge elbows allow for swivel and 90 degrees of bend. Wrists are ball-hinges, rather than double-ball pegs, and they work as intended. The diaphragm features a ball joint with another at the waist. Between the two, Shredder gets good rotation and even decent forward and back “crunching” motion. It can get a little gappy, but it’s not too bad. Hips continue to be a problem for JoyToy though. Shredder can almost hit a split, so that is much improved over the turtles. He can kick back an okay amount, but kicking forward is dreadful. I don’t know what they’re doing to so severely limit the forward movement of the legs, but they need to correct that. There’s just not enough room between the top of the leg and the abdomen so if you push it beyond what it wants to do you’ll probably separate the figure at the waist. Since it’s a ball joint, this isn’t a scary thing, but it makes it easy to see what’s going on. There is a thigh swivel which does what thigh swivels do. Double-jointed knees go a little beyond 90 and the ankles work well with a hinge and rocker setup.
Shredder triumphant!
I really like this Shredder. It’s not perfect, but for a 1:18 Shredder it’s pretty much all we have in this scale. And that by no means is an indication that I’m settling here. This is a nice figure. The upper body poses really well and you should have no trouble finding some intimidating poses for this figure. And I think it’s a better overall figure than the turtles and I really like those figures. If you’re into this scale and took the plunge on those turtles, then you owe it to yourself to add this Shredder to your collection. He’s great and it makes me want to see more from this line. Maybe I should get the Foot Soldiers I passed on? Can I continue to hold out hope that BBTS will get Bebop and Rocksteady? I’d hate to miss out.
We’ve got more Shredders and more JoyToy Turtles for you to check out:
It’s been said before and it will be said again: everyone is making Ninja Turtles. It feels like the list of companies not making Teenage Mutant Ninja Turtles is smaller than the list of those who are. Viacom has not been shy about licensing the brand out to toy makers and it’s reaching a point…
Where do you take your heroic comic book franchise when you kill your main villain in the first issue? Well, you first undo that rash decision by bringing him back! Teenage Mutant Ninja Turtles co-creators Kevin Eastman and Peter Laird famously killed The Shredder in the first issue of their comic. They never intended to…
For today’s latest Turtle Tuesday action figure review, I think we can go a little light. That’s because I am looking at yet another action figure release from the Mattel Masters of the Universe Origins – Turtles of Grayskull crossover line between the heroes and villains of MOTU and those of Teenage Mutant Ninja Turtles.…
JoyToy is coming in hot at the end of the year with its take on TMNT.
It’s been said before and it will be said again: everyone is making Ninja Turtles. It feels like the list of companies not making Teenage Mutant Ninja Turtles is smaller than the list of those who are. Viacom has not been shy about licensing the brand out to toy makers and it’s reaching a point where there isn’t much for companies new to the brand to do. How does one stand out? There’s been different versions of the gang throughout the years, but even the hideous Christmas turtles received figures this year. We’ve got toys based on the old cartoon, the kind of old cartoon, the cartoon that feels new (but is actually a dozen years old), movies, old comics, new comics, toys of toys and did I mention the ugly Christmas turtles? Yeah, it’s crazy, and I guess we’re in the midst of a new golden age when it comes to TMNT action figures, but one aspect of the brand that has not been tackled much is a smaller scale. Specifically, 1:18.
These turtles are pretty little. Left is a Super7 Ultimates, right is a Playmates Raphael.
The 1:18 scale basically owes itself to Kenner and its original Star Wars line. Kenner wanted to be able to sell action figures of characters like Luke Skywalker and Han Solo, but also their spaceships. Prior to that, most figures were pretty damn big. Think classic G.I. Joe. If your figure is 8″ tall well then the spaceship he rides in is going to be both massive and expensive. When Kenner did its Star Wars line there really wasn’t a science to it they just arbitrarily settled on 3.75″ for the figures. It’s basically been retrofitted as 1:18 scale and after the success Kenner had Hasbro would follow suit with the original action figure, G.I. Joe. Over the years, scale has become more uniform. Or at least, close to it. Most figure lines (and collectors) seem to prefer 1:12 or six inch scale for their figures. Of course, there’s “import 1:12” and “Marvel Legends 1:12” so nothing is completely scientific. There’s also a tendency for taller characters to get shrunk a little and smaller ones made bigger to find a middle ground of sorts. Usually there’s an anchor character and others are supposed to scale off of that character. And often times we’re talking scale with characters that don’t physically exist and different artists draw them differently. It’s very much an inexact science.
And here is Leo with some other dainty figures (left to right): Vintage Collection Boba Fett, ReAction Michelangelo, Plunderling
With Teenage Mutant Ninja Turtles, the original Playmates line didn’t really have a scale. Characters were all pretty close in height and the taller guys would be sculpted all hunched over and such. Modern lines have adopted more of a scale with NECA hitting something close to 1:12 with its toon line and 1:10 with its movie figures. Super7 goes for 1:10, Mezco 1:12, and so on. No one is doing 1:18 though unless you count Super7’s ReAction figures, but they’re more like the old Kenner stuff in that there isn’t really a scale.
JoyToy took an interesting approach to the shells.
When I was a kid, I can remember my mom telling me that Burger King was going to have Ninja Turtles in its kid’s meals soon. I was excited because I liked Burger King and I loved TMNT. In my head, they were going to be mini figures similar what I already had, just on a smaller scale. In reality, they were badges and pretty lame. That idea of small TMNT figures never left my brain though and was something I wanted. I kind of liked neat, tidy, things. I didn’t really associate size with value unless we were talking about “deluxe” sized figures like the 12″ stuff. And as an adult, I collect mostly 1:12 and 1:10 rarely dipping into the larger or smaller scales, but that’s not because I dislike either. I think the 1:18 Star Wars figures are actually pretty cool, I’m just not that into Star Wars. When I saw a company was doing 1:18 turtles, I immediately took notice, even though I had never heard of the company before.
Everybody gets a skateboard, some pizza, and a Turtlecom.
And that company is JoyToy. They’re a Chinese toy producer that seems to be mostly known for Warhammer stuff. I took a look at some of the stuff they’ve done, thought it looked pretty cool, then searched for a place I could buy these things. I’m guessing that JoyToy only has a license to distribute these in Asia because a lot of the usual places aren’t carrying them. I ended up ordering from 5k Toys, a vendor I’ve heard a lot of good things about, but never used myself. The figures were around 30 bucks a piece so not cheap, but not as high as some other figure lines I buy. I had to wait a bit, but they arrived eventually right around Thanksgiving. It’s taken me while to get to talking about them because of Christmas and all, but now I’m ready to and I have a lot of good things to say.
These figures don’t really need it, but they do each come with a small logo stand.
The JoyToy turtles all come in their own window box with modern logos printed on. These are official products, just not made for distribution in the US. The turtles are almost comically small inside these boxes which are bigger than most S.H.Figuarts boxes I have, but they do offer a good look at the product inside. The turtles are all a unique design, but it’s a design that’s a bit familiar. They all feature the standard colored masks and pads, but they also have tape around the wrists and ankles which is similar to the 2012 Turtles. I get a DreamEx vibe from them, a company that made TMNT figures several years back, and also a bit of a Mortal Kombat one. It’s mixed with a touch of the 2003 turtles which I see in the faces. The whited-out eyes with smiles (for Mikey and Donnie, at least) are the biggest contributors to that impression.
JoyToy’s approach to the belts has stirred some controversy in the TMNT community.
Each turtle is the same shade of green which is a fairly dark, saturated, green. It’s very close to what I think of as the default Leonardo green in a lot of TMNT media. There’s liberal use of paint washes on them, but there is also a glossy quality to the green. It’s almost like they’re sculpted out of hard candy. It’s weird since typically one associates shiny figures with cheapness, but these don’t look cheap. The plastron has a more scalloped appearance than is typical and it’s partly due to the articulation cut. All of the turtles also have a chest strap. In an odd quirk, the belts do not continue onto the shell, but behind it. For weapon holsters, Leo and Donnie have sheaths bolted onto their shells. Raph has a spiked piece of steel while Mikey has a license plate, for some reason. He’s also the only one lacking weapon storage options, which is odd. There’s a chain on the license plate that you can finagle his weapons into, but it’s a curious choice to make.
These effect weapons are pretty rad. Raph’s is probably the worst of the four as there isn’t an obvious effect for a sai.
All of the figures seem to utilize the same body. The chest and heads are the only different parts as they all have a different chest strap. Leo’s is just a basic belt, Donnie’s has a pouch sculpted in, Raph has some kunai, and Mikey has what looks like an old iPod sculpted onto his. Portraits are obviously different which is often the case for TMNT. Leo has a scowl on his face with a slightly pointed beak. Donnie has a wry smile while Mikey is showing some teeth. Raph has the classic Turtle grimace with exposed teeth on each side of his mouth. With these heads, I’d say the beaks are slightly understated, but the overall shape is still pretty much traditional TMNT. The elbow and knee pads have more of a standard sports equipment look to them with some nice texture. They’re also floating and each turtle has a different piece of thigh armor. Leo has these studded thigh pads on both legs while the other turtles only have one. And they’re different for each with Donnie having more pouches, Raph more knives, and Mikey some spray paint canisters (non-removable). Donatello also gets a satchel that appears to be a med kit which he can remove if you like. I suppose the thigh parts are also removable, but you would have to pop the legs off in order to get at them.
Like the 2012 versions of the characters, Mikey gets the shortest bandana tails.
And then there’s the size. These turtle boys stand pretty much right at the 4″ mark. A four inche turtle in true 1:18 scale would come out to these being 6′ tall in “real life.” That’s big for a ninja turtle who typically are much closer to 5′, but this is also JoyToy doing their own thing. Proportionally speaking, they look like taller turtles. The torso is longer and more like a typical comic book super hero. It will be interesting to see how other characters in the line scale with them. I’d prefer Shredder, for example, be at least a little taller. I guess we’ll see. In terms of actual height, they’re not much smaller than vintage Playmates figures, but one look at the proportions tells you this is a totally different scale as they’re not nearly as chunky. And if you’re going to do TMNT in this scale I think it makes sense to go a little bigger. If these were much smaller they might not look or function as well as they do.
These guys pose pretty well with nice, tight, joints.
And function is certainly what JoyToy is going for. These maybe something closer to Kenner sized, but they’re far from Kenner articulated. Each turtle articulates about the same and they feature double-ball pegged heads, shoulder hinges, single elbows, double-ball peg wrists, ball-jointed diaphragm, ball-jointed waist, ball-socket hips with thigh swivel, double-jointed knees, and hinged ankles that also feature an ankle rocker. The biggest limitations are found at the elbows, hips, and knees. Elbows will only bend 90 degrees while the knees will get just better than 90 as the kneepads seem to impede the range. The hips are a bit puzzling. They only go out to about 45 degrees which is disappointing. The thigh armor gets in the way, but even on the legs without they still don’t go much farther. It seems the thigh swivel catches on the belt and they basically all have pouches on their belts which get in the way. They also can’t kick forward 90 degrees and it just seems like something is off with how the joint was engineered. It’s easily the weakest aspect for these guys. The added joints in the torso also aren’t going to really deliver a proper ab crunch, but they will allow for swivel and tilt points.
Each figures comes with a quadrant of the below manhole cover diorama which can be snapped together.
The accessory load-out for these guys is pretty similar from turtle to turtle. You’re going to get hands, weapons, effect weapons, a skateboard, and something unique. For hands, each turtle has gripping hands, fists, open hands, and tighter gripping hands. Getting them on and off was okay for 3 of my 4. Raph was the troublemaker and the double-ball peg for the wrist kept popping out of the arm on me, but a little dunk in hot water fixed that. Some hands also won’t go on nicely the first time and may also need a dip. Each turtle has a chunk of road with a piece of a manhole cover on it that can go together to form a little diorama. There’s a single foot peg on each piece too which is kind of cool. If that’s too cumbersome, there’s also an included disc stand with the TMNT logo on it. The skateboard is the same across all four, it’s just painted slightly different to match each turtle. There’s a foot peg and real wheels and it’s fine, if you want a skateboard. Each turtle comes with an open Turtle-Com. It’s painted pretty well and resembles the old cartoon, it’s just pretty big for a 1:18 scale version. It’s almost the size of their entire forearm, but I guess cell phones were pretty big in the 80s. Each turtle also has a pizza slice in some state of consumption. It too is pretty big so I guess these are those massive New York style slices. Paint isn’t great though as the yellow cheese has a green tint to it. I’m guessing it’s molded in green and painted over. I can’t see myself using them.
There’s a foot peg for each turtle on this thing once assembled plus plenty of room in the middle.
Each turtle comes with the weapon you would expect. And like the 2k3 series, they’re colored as well to match each turtle. Leo has his twin katana, Donnie his bo staff, Raph a pair of sai, and Mikey his nunchaku. The nunchaku are all plastic, no chains, and one is slightly open and the other features the handles closer together. Donatello also has the previously mentioned satchel and he also has a wrench, for some reason. It can fit onto a loop on the med kit, but it’s not that secure. Each turtle also has effect weapons and these are pretty cool. They’re done with translucent, blue, plastic. For Leo, it’s done like an afterimage effect with his swinging katana. They’re painted really well and the effect is awesome. Donatello has a spinning bo, though it doesn’t actually spin unless you spin his hand at the wrist. Mikey has two, whirling, nunchaku and they too don’t spin, but still look awesome. Raph has a thrusting effect that makes me think of video game moves or something. One of them has some yellow paint on the translucent section which sucks. I’ll have to see if it will rub off with a Magic Eraser. All of the effect weapons are self-contained, they’re not effects that clip onto the normal weapons, and they all look terrific. I honestly can’t see myself displaying these figures without them in most cases. Raph’s are the least dramatic, but still useful. I’m in love with the Leonardo sword effects. Other companies need to rip those off.
Of course, we can’t forget about the pizza. Raph’s kind of looks like an alien profile.
What I haven’t really mentioned is the feel these figures possess in-hand. Despite their small size, they’re sturdy. Joints are pretty smooth, but also tight. I’ve had Mikey in a running post on my desk for weeks where only one foot is on the surface and he hasn’t fallen over. He looks so awesome in this pose that I don’t even want to move him for pictures, but obviously I’ll have to. These are great desk buddies as they’re just fun to mess with. They come with useful hands and extra stuff, but I’ll be unlikely to swap out their gripping hands because I like my turtles with weapons in hand. The only negative is that the hips suck. If JoyToy could fix those then these would be even better. An extra portrait for each turtle would have been cool too, or the ability to swivel the bandana knots, but those are nitpicks. I’m pretty happy with the look of each turtle as-is.
Be sure to check back because we’re not done with JoyToy yet!
I think JoyToy is onto something here with TMNT in this scale. It’s too bad they’re a little harder to come by in the US, but not impossible. There are plenty of retailers selling them and with reasonable shipping to the US. Big Bad Toy Store did list the Bebop and Rocksteady from this line for a little while, but have since taken them down which makes me think they won’t be carrying any product from this line likely due to distribution issues. I reached out to them to see if the figures were still coming and they just said they were working out some details with the manufacturer and that they’d be back on the site soon. That was weeks ago so I’m guessing if I want that duo then I’ll have to go elsewhere. By the time this goes up I should have Shredder and hopefully that review isn’t too far away. These are great though. They aren’t perfect, but I quite like them and they’re among my favorite toys of 2024. If you like the look of these turtles and are interested in a smaller scale then I definitely recommend checking them out.
We have other TMNT reviews and even some 1:18 stuff if you haven’t had your fill yet:
If you know anything about me then you probably know that I like collecting Teenage Mutant Ninja Turtles action figures and I like Christmas. Strangely, those two things have not come together all that often. Most of the television shows featuring the famed four opted not to feature the holiday in an episode. And without…
I’ve been collecting action figures in some capacity for my whole life, and it occurred to me now that I’ve never owned the Fett man. That’s Boba Fett, who is one of the most iconic characters from Star Wars and also pretty noteworthy in the world of action figures. I am not the place for…
Pack your bags and grab the sunscreen because today we’re heading to Florida! It’s vacation time folks, and even the bad guys deserve a little fun in the sun sometimes. Coming from NECA Toys we have another fun variant of the duo Bebop and Rocksteady. Always more comic relief than true threat, the boys come…
After putting a real hurting on my wallet in 2023, Mondo decided to take it easy in 2024 with its line of sixth scale action figures based on the animated series X-Men which ran from 1992-1997 on Fox Kids. Two figures ended up getting released this year, Rogue and now the leader of the X-Men Cyclops. With Cyclops though we get a slight change because easily the biggest thing to happen to the X-Men in 2024 was the release of X-Men ’97. Well, some would argue for a movie staring a foul-mouthed merc and an old man as being the biggest business in the X world, but I’m going with the Disney+ series. Since the show turned out to be quite the hit, and because it’s a continuation of the original X-Men series, Mondo decided its figures could use a little rebranding which is why Cyclops is the first release to be billed as hailing from the new show. What does this mean for the figure itself? Not a whole lot.
Yeah, I know, this isn’t a fair comparison.
Cyclops still comes in the same style of window box with artwork from storyboard artist Dan Veesenmeyer. The difference between his release and the others is that the character model definitely resembles the look from X-Men ’97 and not the original show. That’s not a huge change as the costume is the same, but Cyclops has a slightly slimmer profile and the detail work is a dead ringer for the same in the new show. For the figure, there’s really no change and Mondo via its YouTube channel has basically admitted that the figures are going to hew closer to the original series. It’s just now they will be able to toss-in items and accessories pulled directly from the new show where it makes sense.
“To me, my X-Men!”
And we pretty much know this to be true because concept art for Cyclops was shown well before X-Men ’97 debuted. Here we have another sculpt by the awesome Alex Brewer with paint by Tomasz Rozejowski that really harkens back to 1992 and that original Fox series. Cyclops stands a full 12″ and is clad in his yellow and blue Jim Lee outfit which he wore almost exclusively in that show. Like prior figures in this line, there were two editions of Cyclops made available and I opted for the limited version which came with extra stuff which we’ll get to.
You may want to separate these two on your shelf.
The sculpt for Cyclops may not be complex, but it gets the job done. He’s well-muscled and proportioned with a portrait that evokes the original series. The details one would expect are in place like the segmented straps on the belt or the pouches and straps. There’s even a little extra detail where the chest strap attaches to the lower belt that I don’t remember seeing in the show. The hair and the visor are all appropriate and the placement of the thigh straps appears spot-on as well (they’re also floating and slightly annoying as a result). That doesn’t mean there isn’t room for some nitpicks. Cyclops was nicknamed Slim early on, but by the 90s he was a pretty massive dude. This figure depicts him as a big guy, but maybe not quite as big as he could be. The legs look fine and so do the arms, but the chest and abdomen strike me as a bit undersized. It’s almost like Mondo aimed to fit this Cyclops figure in-between the 92 and 97 version. It could also be for a different reason which ties into the extra stuff. This version of Cyclops has removable arms and an optional flight jacket part like the Logan figure. If he were any bigger he might look huge with the jacket. If so, I disagree with the approach as the jacketed look should be a secondary concern, but the feature also seems to play a role with his shoulders being set apart from the body. These are all things mostly noticeable when the figure is just standing straight up and down, pose him and it’s less an issue, but it’s an expensive figure so we have to nitpick where it’s warranted.
He scales well enough with the bad guys too.
What really offers no room for disappointment is the paint. Mondo just slays when it comes to that part of the presentation and Cyclops is no different. The base blue is the perfect royal blue and the lighter blue used to shade it and the blacks all make him pop. The yellow is the right shade with just a hint of red of in it to lessen that lemony look the Hasbro figure of the same has. The different shades of gold used to apply the cel-shading for the yellow looks great and everything is rich and full. There’s an impressive lack of paint slop and issues as well. With such an ambitious paint job some of that is expected, but I’m finding it hard to notice with this one. There’s a visible brush stroke on the chest strap, but apart from that I’m at a loss. This is some really impressive execution so Mondo better hang onto whatever factory put this one together.
Mondo decided it was important Cyclops be able to do stuff like this.
Cyclops comes with new branding, but he also comes with new articulation. Mondo tends to keep things basic with its figures as they prioritize aesthetics over function. And at this scale, I think that’s the right approach. However, there’s no denying that certain characters need to be able to hit certain poses and for Cyclops it’s being able to place a hand on the side of his visor to activate his optic blasts (even though we also see him do so without pressing a button in the show, but lets just go with it). In order to achieve that function, Mondo opted to incorporate double-jointed elbows into this one. And they work great, no problem hitting that pose and he can pretty much put his hand to his X communicator on his chest as well. And the aesthetics trade-off is nil, as far as I’m concerned. We’re all toy collectors and we’re used to double-jointed elbows. They look fine, better than the swivel joint used on Wolverine and Sabretooth that has some miscolored plastic, so I hope they do this more going forward.
This is a team that loves a good, brown, jacket.
Aside from that, the articulation is pretty much the same as other figures. The head is on a double-ball peg and the range is pretty nice. It is a little more gappy than past figures, but I’m guessing they prioritized plus range at the head given his unique skillset. The shoulders are the usual ball-hinges with a bicep swivel past that. Wrists are ball-hinged and they can be tight, but I didn’t experience any issues. The torso is where things get less impressive. Cyclops has the usual ball-jointed diaphragm and waist, but he also has that unique belt that goes around his chest. It’s connected to the belt at his waist so it’s going to get in the way. It has some play and will float when you manipulate the chest, but the range is okay, at best. Hips are ball-sockets with thigh swivels built in, but the rubber trunks will hinder the figure’s ability to kick forward and back. I can get him into one knee poses, but it’s awkward and one must be mindful of paint rub. Knees are double-jointed and the ankles hinge forward and back with an ankle rocker. The ankles are pretty tight, but I didn’t need to heat them up to get them working. Shoulders are really tight too, but again, no heat needed as I just went easy.
Multi-blast!This is the big one.It sags a little.
Cyclops has a ton of extra stuff to go through so let’s not waste any time. We’ll do the standard version accessories first which include a stoic head and a yelling head. Both feature interchangeable visors and come with a standard one by default. Getting the visors off and on is pretty painless, and both heads can use all of the visors. The extras are a visor with a lens flare and one with a slot in it for blast effects. And for blast effects we get two by default. The first is a pretty standard Cyclops blast. It’s 4″ long or so with a splash effect at the end. The easiest way to put it on is to slot it through the visor first, then plug it into the head. It can only go in one way so if it doesn’t fit just spin it around. The other blast effect is an arc with four short blasts. It strikes me as a very Marvel vs Capcom effect and it looks pretty cool. Both are done on translucent red plastic which feels appropriate for a Cyclops effect. They’re rigid so hopefully none arrived warp. I love the look of the blast, and the lens flare part is also pretty cool, so settling on a display is actually quite challenging with this guy. You’ll want to swap some stuff from time to time.
“I was raised by a cup of coffee.”
Cyclops also has an assortment of hands to make use of. By default, he comes with a set of fists which are always useful. In addition to that he has two clenching hands, two “finger bang” hands, a set of two-finger hands for his optic blasts, and a single right gripping hand. The gripping hand is for his cup of coffee which is included. This was seen a few times in the first season, most memorably for me in “Deadly Reunions,” and it’s a pink cup with sculpted steam wafting off of it. Even though Mondo included a gripping hand for it, I find the clenching hands work just as well to hold it. Swapping heads and visors is painless with this guy, but the hands are tough. The pegs going into the arms are ribbed when they probably don’t really need to be. The ball hinge also plugs into the hand and each hand is on its own, which is how Mondo always does it. Initially, I felt like the fists were more likely to come off at the hand and not where they’re supposed to in the forearm, so I heated the forearms of my figure with warm water. It’s made easier by the fact that the arms are designed to pop off. I was then able to get the hands out, but it was dicey. I’m reluctant to really jam any of the hands into his forearms as a result, though I haven’t had the same level of difficulty with the other hands.
Sometimes it gets cold out there.
That’s all the stuff that comes with the standard, $220, version. The $240 limited edition has a few more things including the aforementioned jacket. Swapping the arms isn’t too bad and the jacket arms come with bare fists. The fists are actually the exact same as the standard fists just painted flesh colored. They are removable, though I haven’t bothered since they’re in there pretty good. He sometimes wore gloves with the jacket in the show so the other hands work with this look as well. The arms are also double-jointed at the elbows just like the standard ones so there’s no loss of articulation in swapping them. I think he looks great with the jacket and it’s a tough call on how to display him. Right now, I’ve gone without, but I’ll be changing it from time to time for sure. Oh, and I had to try because this look is so close to Morph, but the Morph heads don’t fit. The opening is way too small, which is probably good so that I’m not tempted to attempt a very expensive custom.
The big blast needs a little help.“Take that, hairball!”
Cyclops would wear the jacket in the field plenty, but sometimes also to look more casual. To that end he has an uncowled head. It looks great and his eyes are painted red, which makes sense. Maybe some would have preferred brown eyes for the few times he was depowered in the show, but many won’t display him like that because he also has his shades. They’re black with the red lenses that have some white shading on them which looks nice. They’re a little brittle feeling, but have held up fine so far. They slot into his temples and look great when in place. He also has yet another visor that’s been removed so he can either hold it or stick it around his neck or something. It’s a nice touch. I will say, this head is the most X-Men ’97 looking part of the package, which could be intentional. This version also comes with another effect part that is one, massive, blast that’s almost 8″ long. It has a large splash effect at the end and it looks cool, but it’s heavy. There’s some drooping with this one so I’m reluctant to leave it in place for long stretches of time. It probably works best in tandem with an enemy getting blasted so there’s some added support for it.
Probably not going to be the preferred look for most collectors.This head can make use of the blasts though.
Oh, but we’re not done! Mondo likes to toss in a goofy accessory with all of these special editions. We had the elf Jubilee portrait, Gambit as Mystique, and the Morph heads. With Cyclops, it’s a Sentinel head styled to resemble Cyclops. This is taken from the episode “Till Death Do Us Part – Part One” where Wolverine is battling Cyclops robots in the Danger Room. It looks the part and is pretty ridiculous when placed on the head of the figure, but it’s there if you want it. And Mondo went the extra mile and also included a swappable visor piece so he too can make use of the blast effects. It’s a little tighter a fit than the other visor, but it works. I’ll never use it, but it’s funny. Maybe it can be used as a head of a fallen Sentinel with Wolverine or something? Lastly, there’s also the usual Mondo stand. I don’t use them so I didn’t even take it out of the plastic. I wish they’d put an X emblem on it like the Logan one, but it’s fine.
“How do I turn these darn things off?!”
Ultimately, this is another home run by Mondo. Cyclops is a much needed addition to the roster of characters and he turned out pretty great. Did I have issues? Yeah, because nothing is perfect. I’d have liked to see a little more beef in the torso, but that is basically the end of my complaints. I do think the hands could have been made to swap easier and the hands are a longstanding issue with the line (though it’s been better, Magneto was rough). I get why things are tight though because these are big, solid, figures and loose joints would kill them. This figure poses reasonably well and the swappable effect parts and heads are all a ton of fun. This is probably the figure that is the most fun to pick a display, though Gambit and Jubilee are pretty great at that too.
It’s the Blast Squad!
Cyclops is definitely the last figure from this line to see release in 2024, but on-deck is another Wolverine. Alex Brewer has sculpted all of the figures in the line since the original Wolverine so Mondo wanted to get his take on the character and the looks we’ve had are promising. There’s also a retro Cyclops coming based on his look in the season finale of X-Men ’97. I have not gone for the variants in this line and I didn’t go in for that one either. We should also start seeing the first figures from the Spider-Man ’94 line very soon. I don’t plan on going all-in with that one, but expect at least a couple reviews of that line. Beyond that, we don’t know what’s next, but it sure seems like this line is going strong. If I had to guess, I’d say Storm will follow Wolverine, but I hope we get all of the core cast from the ’92 series. Even though it gets harder and harder to find room each time one arrives.
If you liked this review, then check out more from Mondo’s X-Men line:
The conclusion of X-Men ’97’s first season has left behind a void. For 9 consecutive Wednesdays, we had something awesome to get up for. Now the long wait for a second season has begun, but here to help fill the void while we wait is Mondo. Mondo has been dishing out some very impressive sixth…
Mondo has been absolutely killing it with its sixth scale line of action figures based on the now classic animated series X-Men. The company also really ramped up production in 2023 on the line by soliciting five new figures during the year. At over 200 bucks a pop, it was quite the hit to the…
It is my belief that when it comes to X-Men, the animated series which debuted in 1992, the breakout star of the show was Gambit. Wolverine was the closest thing we had to a household name going into the show and was the de-facto pick for favorite character of many. And while the whole roster…
Four Horsemen continue their dance with Dickens for 2024.
For past few years Four Horsemen have been bringing us surprise Christmas figures each holiday season. The first was Krampus and the second Father Christmas. Last year, Four Horsemen surprised us with the Ghost of Jacob Marley. A ghost character, especially one in 19th century clothing, can make for a fun design and figure, but it was still a bit surprising to see Four Horsemen pivot from folklore to literature. Granted, A Christmas Carol is practically folklore at this point and it’s ingrained in the Christmas season. The only downside to such a release was that it essentially removed the element of surprise when it came to the annual Christmas offering. I suppose some may have wondered if Four Horsemen would really go down a Dickens hole, but any who were still uncertain likely aren’t now for this year’s release is the unsurprising Ghost of Christmas Past.
She’s here to party.
Ghost of Christmas Past went up for sale the Saturday after Thanksgiving and has been rolling out to customers ever since. She is much like the other figures in the line in that she comes in a tall window box with a wrap-around cover that doubles as a backdrop and is held in place with magnets. The cover features some beautiful artwork of the character by Nathan Baertsch in a snowy setting while the reverse would appear to depict the interior of old Fezziwig’s. It is quite lovely, though part of me is left wishing that it was an image of Fezziwig’s from the outside of the building like the spirit is looking in.
Give her a flight stand and she really comes alive.
That’s a minor critique and what most are likely going to be interested is the figure itself and the Four Horsemen interpretation. The original text described the spirit as male, and an old one at that, but many have also depicted this spirit as female. Four Horsemen lay out their reasoning for such in a lengthy write-up of the character, but the simple fact of the matter is making this ghost female adds some variety to the line. The look of the figure conforms with my interpretation of the character, with a few twists. She’s about 6.5″ to the top of her head, but out of the box comes sporting a crown that takes her all the way to 8″. She is a beautiful woman with a fair complexion and gray hair. There’s a touch of color to her cheeks and lips, but little more. She’s clad in a white, sleeveless, gown that’s trimmed with a silver flower pattern with two flowing capes of a cheesecloth-like material, it’s light and partially transparent. The crown is quite ornate with translucent, blue, ice on the front with a wreath of silver roses. There’s a hint of a yellow-green behind the roses and rising from the crown are tall antler-like sticks. The outside of which are painted brown while the inside is a bright orange almost like there should be flame in the center. The cover picture has a burst of light shining through so I suppose that’s the illusion we’re going for here.
She basically has an adapter piece to achieve the four-armed look. The two circular holes on her back are not used for anything with this release.
Perhaps the most standout element of the figure are the extra arms protruding from her sides. This is accomplished by a piece that plugs into the figure’s upper back. In the text, Scrooge sees this apparition as constantly changing and sometimes he can’t tell if she has two arms or four and this is a clever way to accomplish such. The piece is easily removed if you prefer a two-armed ghost and the cape will cover the unsightly holes on the back of the figure. I will say these arms do not sit as high as the artwork depicts them, but that may have been a harder feat, especially if the intent was always to make them removable.
Some may prefer two arms, but I say more is better.
Adding two arms obviously adds to the articulation as well. The Ghost of Christmas Past, like most Four Horsemen figures I’ve encountered, isn’t going to really impress with the articulation, but she probably has enough. The head is on a ball hinge, which I wish wasn’t the case as it’s a bit ugly. Especially since if you use it too much you’re sure to have some paint flake off of it. Shoulders are ball-hinged and elbows single-hinged. They’ll swivel, but they’re tight and some of the arms almost feel like they’re binding. Do be careful. Wrists all have standard, horizontal, hinges and will swivel. There’s a ball joint in the diaphragm and a waist twist. Legs are ball-hinges and there is a thigh swivel. Knees are single-hinged and will rotate a little. Ankles have a cut for a swivel and the feet, which are bare, have a hinge and ankle rocker. The body beneath this appears to basically be wearing gray underwear. I assume it’s sourced from another figure, but you won’t want to remove the dress unless you need a blank to customize.
The different faces of the Ghost of Christmas Past along with her alternate hair piece.
Not only do the arms change in the story, but so does the spirit’s face. Four Horsemen have equipped her with three portraits. The first of which is a conventionally attractive woman. She looks like the actress Abigail Spencer to me, but that could just be me. Her other portraits show her in an aging, or decaying, state. The first replaces her left eye with an all white one and her skin is deteriorating slightly on the same side. The third has both eyes whited out and her skin is cracked and damaged. Aside from the eyes, the effect is subtle, but both heads add a more supernatural element to the presentation. And if you don’t care for the large crown, there’s a separate hair piece that omits it. These extra faces are basically just to add a different vibe and to keep the figure from being “too tame,” as Four Horsemen put it. Drop the crown and other distinguishing touches and she can basically just be a wraith for a non-Christmas display. It’s your choice.
Do be careful when swapping hands. Maybe just heat the forearms up out of an abundance of caution.
For hands, Past comes with a pair of open hands and a pair of gripping hands by default. In the box are a set of fists, a set of style posed hands slightly different from the open ones, and another set of gripping hands. The figure, including the hands, is all painted which may contribute to the hands being difficult to remove. I did not even attempt to remove the two open hands, but I did remove the gripping hands from the second set of arms. They were tight and I actually broke the hinge on the left hand. I had to dunk the forearms in hot water even days after opening the figure (it’s cold up north so I let figures warm up this time of year) to get the hands off. Since the figure came with four gripping hands, I didn’t feel like reaching out to customer service was warranted, but do beware.
Stuff is good.
The Ghost of Christmas Past comes with several other accessories to liven up the package. For handheld things, we get her staff which is topped with a snuffer. It’s gold in color and has a spiral texture. The snuffer end is on a ring so it’s floating, almost like a bell. She also has a large, stand-alone snuffer or extinguisher. It’s gold and has some nice silver trim to it. There’s a little tab on it she can hold onto, though she isn’t going to get a truly tight grip with any of her hands. The last handheld object is a little piece of holly. It looks the part, but it’s too thin for her gripping hands. You’re better off using one of the more style posed hands and sliding the stem between some fingers if you’d like her to hold it. The other, main, accessory is a snow base with a street light that fits into it. It’s a snug fit and the lamp being a hard plastic makes it a little worrisome when trying to slot it in. Don’t get too rough or you may break it. It looks lovely though, I just wish it was battery operated so it could actually light up.
If you prefer the no staff look, she has more of a handheld extinguisher.
The Ghost of Christmas Past comes with two more items. The next part of the story which is in book form and a bonus accessory intended to be a surprise. I won’t spoil it, but as far as surprises go I think it’s the best, and most useful, one yet. The book is stave 2 of 5 and if you have any kind of familiarity with A Christmas Carol then you should know who is on deck for 2025. I will say, that one is less interesting to me as I don’t see an obvious way to make the character visually striking, unless he’s huge, but maybe they’ll surprise me. It would seem that the next three years are basically cemented as far as releases go with this Christmas line. It’s a little disappointing knowing we don’t have a surprise coming for awhile, but maybe one of the next staves is doubled-up. The final stave is basically the aftermath where one would expect to find a figure of Scrooge. Maybe Scrooge instead gets released with the final ghost as a two-pack or optional two-pack? Some may only be in it for the ghosts, though I suspect many want a Scrooge as well. Perhaps to make Scrooge a bit more exciting he’ll come with multiple outfits so that he can basically be any of the Scrooge’s from the story, save for the child version. Or maybe he’ll come with Tiny Tim? I guess there are still questions left to be answered.
This is shaping up to be a fun display in another 3 years. I wonder how many people out there will want a Scrooge for every ghost they have?
If you’re down with Four Horsemen’s take on Dickens then you’ll probably enjoy this figure. It’s undoubtedly part of what will be a much larger display some day and is an interesting take on the character that also can pass for a traditional one as well. If you’re looking to buy it, however, you have missed your chance for 2024. She will undoubtedly be back as a retailer edition with a slightly different colorway at some point next year and Four Horsemen will probably make this version available again next Christmas, which is what they do with this line. If you happen to catch them at a convention in 2025, then they may have some of these on-hand as well. In other words, if you missed it this year don’t go nuts trying to get one on the aftermarket. The MSRP is $60 and I definitely wouldn’t pay much more than that just to get the figure early.
Missed out on any of the past Figura Obscura Christmas figures from Four Horsemen? Check these out:
Four Horsemen Studios is back with another holiday release in its Figura Obscura line of action figures. This sister line of their more famous Mythic Legions property launched two years ago with Krampus and continued with last year’s Father Christmas. Many fans, myself included, expected another holiday figure this year, though if you had asked…
It was just last year that Four Horsemen launched a subline of its popular Mythic Legions brand of action figures called Figura Obscura. Practically speaking, there’s little difference between the two lines as Mythic Legions seeks to serve as a modular line of toys based on myth and legend and that doesn’t feature licensed characters.…
Over the years, I’ve acquired quite a few action figures designed by the good people over at Four Horsemen LLC. They’ve been designing figures for companies for awhile now. My first exposure to the company was via NECA’s inaugural line of Teenage Mutant Ninja Turtles based on their appearance in the Mirage Studios comics. Lately,…
It’s time for your favorite holiday tradition: Christmas with the Joker!
Yesterday, the United States celebrated the Thanksgiving holiday so you know what that means? The Christmas season is underway! And it’s one that feels like it could not have come any sooner. We need a little Christmas, right this very minute, and today it’s coming to us via an unexpected source: The Joker. Yes, the Clown Prince of Crime is getting into the Christmas spirit today for, what else, an action figure release. This is yet another old one from DC Collectibles re-released via McFarlane Toys. The first such set of figures we looked at released this way didn’t go that well. Will this Joker fare any better? Will the magic of Christmas help to elevate him above his brethren? Let’s find out together.
Joker, as seen in the episode from which this figure is based on.
It was years ago (2017, if I’m not mistaken) that DC Collectibles released a Joker action figures based on the episode of Batman: The Animated Series “Christmas With the Joker.” In just the show’s second episode it not only introduced audiences to its version of the Joker, but also made it a Christmas special. Since the show was debuting in September, that meant it had to be held back a bit, but still managed to air in November. Nonetheless, it’s not one of the show’s better episodes, but the mere fact it features the Joker and it’s a Christmas episode helped it to remain memorable.
He certainly looks happy to be celebrating the holidays with us.
When this figure was first released, I considered getting it. I don’t know why I didn’t, I guess maybe I was trying to save money? I probably feared that getting even one action figure from this line of Batman figures would open the floodgates so I held off. When it went on clearance I still held off. When it got a re-release with a pearl finish? Oh yeah, I held off. And when that re-release also received the discount treatment? By then I had become a pro at ignoring this Christmas Joker so it was a piece of cake to do so yet again.
He’s definitely not going to scale with the McFarlane Batman Santa.
Now, it’s 2024 and McFarlane Toys has decided it needs to re-release this Christmas Joker. I don’t know why in 2024 that I feel like now is the time to jump in, but it’s what I’ve done. The wave one figures from McFarlane were borderline terrible. I like the sculpt of the Scarecrow and Freeze is okay, but the Batman and Robin figures were just plain bad. The paint jobs are pretty hideous and the toys feel cheaper than ever. These figures were fragile when originally released, but they didn’t feel cheap. I don’t know what McFarlane is doing, but these feel comparatively worse. Still, for a Christmas figure I just expect it to stand there and look festive. My demands of this figure are pretty minimal and should be easy to please. I’m not sure it’s capable of meeting even those unambitious demands.
“Now here’s a Santa I can really get behind!”
Joker comes in the normal packaging which is a big window box that’s entirely too large. There is no Christmas theming to the packaging which feels like a real missed opportunity. Make it look like a wrapped gift and you stand to sell two of these per person, Todd. Joker is depicted as he was for most of that episode, well, aside from the hat. He wears the hat for all two seconds, but this figure has one molded to its head. In another missed opportunity, McFarlane could have included a non-hatted head to switch to, but maybe this one was never designed for a removable head? Aside from the hat, Joker is sporting a Christmas sweater that’s a simple red with a green turtleneck underneath. From the waist down, he’s basically your standard Joker with purple pants and white and black shoes.
“Here Harvey, you look like you could use a little Christmas spirit.”
The sculpt is fine, but the paint is not. Joker isn’t as bad as the other figures, but the detail work is pretty awful. His mouth and teeth are sloppy and my figure had a big black smudge on his chin that I’ve mostly been able to remove with a Magic Eraser. His eyes are outlined in black, but he has no eyebrows to speak of. The edges of the white on the Santa hat aren’t particularly sharp, but what isn’t dreadful with this release is the cel-shading. McFarlane added some dark red to the right side of the figure and some dark purple to the pants. There’s also a hit of dark green on the inner sweater. It’s far more purposeful than some of the other figures and the color choices are fine. If all of the figures looked like this there probably wouldn’t be many complaints about the shading. There’s also still a lot of bare plastic here including basically all of the white parts and pants. The original release looks like it was almost all painted, by comparison, so if you can get that one instead for a decent price you may find it the better piece.
Yuck.
What’s not any different is the feel of this thing. It’s cheap and it’s pretty junky. The MSRP appears to be $30 though Target initially offered it for $25 (and it is a Target exclusive). Even at the lower end, it doesn’t feel great. This is more like a $15 figure and the articulation is befitting that price range as well. You get very little here as the head only rotates. If it’s supposed to look up or down mine won’t budge. The shoulder pins are fine and the elbows bend almost 90 degrees. The hips are those awful hinges that DC used to utilize and they both look and feel like absolute shit. He can do splits, but you won’t want him to. Kicking forward and back is minimal while the knees do what they’re supposed to. There’s basically nothing but swivels at the ankle. As an action figure, this thing is terrible for $25 and truly god-awful at $30.
He’s got a candy cane. Cool?
All that said, few are going to buy a Christmas themed Joker action figure to put him in crazy poses. Well, some might want to, but usually these holiday themed figures can get away with subpar articulation if the presentation is there. And aiding in the presentation are the accessories. Joker comes with an assortment of hands: fists, gripping, and what we’ll call candy cane hands. He has these candy cane holding hands because he comes with a candy cane – imagine that? It’s basically a tight trigger finger hand. It would have been nice if regular trigger hands could have worked, but I guess they didn’t want to make a really fat candy cane. As for the candy cane itself, it’s fine. It may not be fat, but it is a pretty big candy cane, but at least those custom hands hold it well.
Joker’s sad little tree.
Joker one-ups the Teenage Mutant Ninja Turtles we looked at earlier this week by coming with his own Christmas tree. This tree makes Charlie Brown’s tree look robust by comparison as it’s really more of a stick. There isn’t a single needle left on this dead piece of pine and it has some twigs poking off of it from which ornaments can be hung. Joker comes with five ornaments: one red, yellow, and green and two blue. One of the blue ones should have a white star painted on the top, but McFarlane cut that from the budget. They’re all spherical with a plastic, black, loop molded onto them so they can be placed on the tree. I wish the loop was just a little bigger as it’s challenging to get them onto some of the smaller branches. Some aren’t angled well for an ornament and the plastic is kind of brittle. I had stress marks on one of the lower limbs as I tried to get a loop over it and had to abandon that idea. His candy cane hands can sort of pinch the hoops on these ornaments so he can hold them, which is a good design choice. There’s also a yellow-painted star molded to the top of the tree.
This little guy enjoys causing mayhem just as much as Joker.
Lastly, Joker comes with his little elf buddy, Laughy. He’s a hand puppet, but not the kind you stick your whole hand into. He’s literally Joker’s fist with a face painted onto the side with an elf costume molded to it. The paint is thick and flakey, but otherwise the hand looks pretty good. It plugs into Joker’s right arm and the fit is rather tight (compared with the incredibly loose alternate hands). There’s a standard, horizontal, hinge which is fine, but the limited range at the shoulder and Joker’s head make it hard for truly convincing posing. If his elbow could actually bend past 90 degrees that would have helped too. Even with the articulation limits, this is probably my favorite accessory of the bunch and I can’t see myself ever displaying Joker without it. Also included is the torso for Maxie Zeus as this is a build-a-figure wave. To complete Maxie you’ll need to also purchase Two-Face, Batgirl, and a Batman variant that’s an homage to an old Kenner toy. I did get Two-Face and if that Batman variant were at all desirable I might have convinced myself to get the rest to complete the figure, but there’s no way I’m spending 30 bucks on a terrible Batman figure.
“Wow Laughy, a shotgun? You shouldn’t have!”
This Christmas themed Joker figure is more or less what I expected. The articulation and overall feel of the figure is truly subpar, but in-line with the first wave of figures. I wish the paint on the Joker’s head was better, but at least the cel-shading is done reasonably well. I also wish he was cheaper, but considering I got the figure at a slight discount I guess I should feel a little better about it. For $30, I can only recommend this for the Christmas enthusiast who also happens to love Batman: The Animated Series. If a Christmas figure does nothing for you then the only reason to get this is for the build-a-figure part. From what I can tell based on the parts I have, the Maxie Zeus figure is going to be a lot like The Condiment King meaning the sculpt is above average, but the scale is way off. He’s a big boy, but hopefully he’s not as floppy in the hips as Condiment King for those who get him. I feel bad for those diehards who really want a Maxie Zeus (I personally did not care for that episode) because they have to get a Batman variant they probably don’t want as well as a holiday themed Joker they may or may not want. For those who don’t, hopefully there’s enough people like me out there willing to buy your unwanted Christmas Joker. At a reasonable discount, of course. That might be the best way to go about getting this guy.
For more Christmas figures or to see what inspired this release check out the below:
Ho! Ho! Ho! It’s the jolly one – Santa Claus! Oh, wait, no, it’s the somber, moody, one: Batman Santa! Yes, it’s our first Christmas themed post of 2023 and it’s an action figure review – shocking, I know. McFarlane Toys has held the DC license for several years now, but this is my first…
Episode Number: 2 Original Air Date: November 13, 1992 Directed By: Kent Butterworth Written By: Eddie Gorodetsky First Appearance(s): Robin, Joker, Summer Gleason, Arkham Asylum An interesting choice for a second episode of a series. It’s a Christmas episode, which feels kind of inline with Batman thanks to Batman Returns. It’s also the debut of…
It was looking like we were in for a photo finish this year. Last year, toymaker Fresh Monkey Fiction partnered with online retailer Big Bad Toy Store to launch the Naughty or Nice collection. Structured similar to a Kickstarter campaign, FMF posted several action figures for preorder with a minimum order quantity needed for the…
If you know anything about me then you probably know that I like collecting Teenage Mutant Ninja Turtles action figures and I like Christmas. Strangely, those two things have not come together all that often. Most of the television shows featuring the famed four opted not to feature the holiday in an episode. And without much Christmas stuff to go off of, the toys have not broached the subject all that often. There have been a few instances though and one infamous example is the 1994 release We Wish You a Turtle Christmas. Utilizing assets from the stage show that had been touring the country, the direct-to-video special saw the Teenage Mutant Ninja Turtles prepare for the holiday while seeking out a gift for Splinter. It was a musical event and one I never watched as a kid. Sure, I saw the tape available for rent, but those hideous costumes were a huge turn-off. Plus, by 1994 I had moved off of TMNT and onto Marvel and video games. There was no going back.
It’s a logical way to reuse these ugly, old, turtles.
In 2020, NECA Toys released a set of action figures based on the old stage show. They called the Musical Mutagen Tour and it brought those ugly ass turtles to the world of plastic in a rather convincing manner. It was a convention exclusive that was also made available at Target since it was the summer of 2020 and conventions weren’t happening. Ever since that release though I had wondered if a set of figures based on that terrible Christmas special were in the cards. NECA likes to do holiday themed releases and we’ve seen Gremlins get more than a couple. They’ve also done Misfits and Elvira and there’s probably more I’m forgetting or choosing not to remember. TMNT is their biggest seller these days and it was dying for a Christmas release of some kind and 2024 ended up being the time for it.
“Hey dudes! You wanna sing carols about pizza?!”
The Dimension X-Mas Vacation is that set. It may not say it on the box due to licensing, but this is basically We Wish You a Turtle Christmas the action figures. It’s NECA repurposing assets from its movie line of TMNT figures along with the heads of those Musical Mutagen Tour figures. Joining the package are some accessories pulled from that special and it’s all presented in a very lovely package meant to simulate a VHS release. There’s even a new story created for this non-existent special that’s summarized on the box itself and it sounds rather plausible for a TMNT release of that era. The set was kept under wraps until San Diego Comic Con of this year and has been made available through Walmart for the not so low price of $150. Because of that price and the niche appeal here, this is probably going to appeal to a smaller audience than usual, but I am most definitely that audience.
The packaging is pretty cool.
This set features figures of the turtles: Leonardo, Donatello, Raphael, and Michelangelo, as they were depicted in We Wish You a Turtle Christmas. It’s basically four identical figures where the only difference is the color of the bandanas. They’re all “naked” as compared with the tour turtles save for their usual belts, pads, and shoes. Yes, shoes, as these costumes decided making turtle feet was way too hard so they have black sneakers and leg warmers. It’s ridiculous. They also each come with a Santa hat which gently rests on the bandana knot on the back of their head. There are two styles of Santa hats between the four turtles and the only difference is which way the pom pom is going: 2 left and 2 right.
“Leo! You’re supposed to put the lights on the tree! On the tree!”
Most of the components of the bodies are reused from the prior tour set which means this is the dated 1990 movie body. The hips are the old pin joints, which is the main tell. The elbows are NECA’s own double-jointed setup and these ones were clearly cut to accommodate the much larger elbow pads of the Musical Mutagen Tour set. Here, they cut for the pad is too generous resulting in uglier looking elbows. The shell and plastron are new though and a better match for the source material compared with the other releases of these bodies. I’m not sure why we couldn’t get updated hips, but it is what it is. Paint across the board is mostly fine. The white of the Santa hats features numerous blemishes across the four while the bodies themselves are pretty clean. There is an overall harder plastic feel to these guys compared with other movie figures. Making use of the gripping hands is going to be harder than usual and there’s some flashing in the elbow joints. It gives the figures a slightly cheaper feel. These costumes are supposed to look cheap, but the figures don’t need to be. The paint around the teeth is at least an improvement over the tour turtles I have with less bleeding of the pink paint onto the teeth.
“Check it out – a tree stand!” “Donnie, this ain’t your best work.”
Articulation for these guys is essentially the same as the tour turtles, which is to say it’s basic. The articulated jaw is a welcomed edition and one of the aspects of these designs that stands out the most in my memory. They’re so ugly and NECA really captured that. Most of the joints are pretty stiff, some almost to a worrisome degree. These guys aren’t going to pose all that well to begin with so I’d advise not forcing anything if it’s fighting you. A hair dryer or hot water will be your friend. The shoulders and hips are especially tight for me while the elbows varied from figure to figure. The elbow joint almost looks like it wants to split which obviously isn’t good, but I haven’t had any breaks. I’ve also been pretty gentile. The ankles are also pretty useless so it’s too bad they didn’t figure out a better way to do the sneakers. The ankle joint really just needs to be visible with this design and it’s not the case. I’m sure the soft goods leg warmers aren’t helping.
“Come on, Mikey, no peeking!”
These turtles aren’t intended to mix it up with the Foot and instead are supposed to just look ugly and festive on your shelf. And to do so NECA included a bunch of Christmas themed accessories. In addition to the hats, each turtle also has a scarf. It’s a soft goods, white, fabric with a wire running through it so it can be posed rather well. One of the four in my set is frayed a bit, which sucks. There’s also a string of Christmas lights to drape over the head of one turtle. They’re sculpted in a soft plastic so it works reasonably well and makes your chosen turtle look like some sort of hideous Christmas tree. There’s also the framed pizza from the special which is just a plastic square with a pizza in the center. The lack of a glass pane means it’s also pretty easy to have a turtle hold it even with the really tight hands. There’s a little hand bell and also a manhole cover, because every TMNT universe needs one, I guess. There’s a skateboard with moving wheels and a nice deco on it and then we also get a whole bunch of presents. They all feature different wrapping paper and help fill out the display. To round out the release there’s also the customary set of optional hands. Each turtle comes with gripping hands, then we get a set of open, thumbs up, pointing, and loose gripping hands for the four to share. I wish we could get a full complement of at least the open and loose hands for the turtles, but this selection is pretty standard at this point.
“Check it out dude, the perfect gift for Splinter!”
Since these are the singing and dancing turtles from a Christmas special, we definitely did not need the usual weapons so NECA did not include them. What I think we definitely did need though is a tree! No Christmas tree in the set makes it feel pretty light. For my pics, I used the Figura Obscura tree, but since it’s not decorated it only works so well. And at $150, that’s unfortunate. There’s a lot of reuse here as well as some reuse potential with the gifts considering all of the Christmas stuff NECA does. For all I know, some of these gifts could even be from other sets, just not ones I have. I like the hats and I like the scarves. I’m a bit torn on if I would have preferred soft goods Santa hats to the molded ones we got. Normally, I’m for molded stuff, but since these were live action characters I think soft goods might have worked. We could have also got a stocking for each turtle. It feels like we should have got more and I question how well this thing will sell because it’s already pretty niche and the price won’t attract many impulse purchases.
“Whoa! No way! He does exist!”
“Huh? I thought I heard something…”
Criticisms aside, if you want some Christmas themed TMNT figures your options are pretty slim. It’s basically the ReAction figures Super7 did a few years back (which I have, but kept on card) or the Christmas plush of Raphael from back in the day. Maybe we’ll get a figure in the future from NECA based on the Michelangelo one-shot which took place at Christmas. And since Super7 is going down the 2k3 rabbit hole, maybe we can get Christmas turtles from the episode of the show based on that one-shot. What I’m saying is this set is fine, but we need more Christmas turtles! And while I think this set is too expensive for what it is, I am glad it exists. Figures based on an obscure and pretty terrible Christmas special is something I find fun and action figures should be fun. Now, if you’ll excuse me Christmas is coming and I need to deck the halls with pepperoni.
“Check it out Santa-dude, something way better than milk and cookies!”
Do ugly turtles and Christmas interest you? Perhaps you’ll enjoy reading these:
Awhile back, I decided to rank the various incarnations of the Teenage Mutant Ninja Turtles from worst to best. Occupying that dubious last place spot were the Turtles featured in The Coming Out of Their Shells tour. That may sound like the title of a TMNT sex tape, but it was something else entirely. If…
Several months ago, I reviewed a product called The Musical Mutagen Tour Action Figure Set. It was a set of toys based on the Teenage Mutant Ninja Turtles stage show, Coming Out of Their Shells, from 1990. Back then, the Turtles were so unbelievably hot that they could sell out a terrible stage show in…
In 2003, Fox and 4Kids Entertainment launched a brand new Teenage Mutant Ninja Turtles cartoon series. This series was the first re-launch for the TMNT after a long hiatus from both film and television and was an attempt at introducing the Turtles to a whole new generation. One of the consultants for the show was…
Despite the amount of reviews presents on this blog, I still do not consider myself a Marvel Legends collector. That’s because my interests are somewhat narrow when it comes to the Marvel brand. Over the years I’ve developed a fondness for Deadpool as depicted on film by Ryan Reynolds. I think the comic book character is fine, but I really like how the character has translated to live action. Which is unusual for me as typically I don’t care much at all about the live action versions of comic book characters. I enjoy the movies, when they’re good, but when it comes to toys just give me the comic book version.
“Hmm it’s probably a lot easier to hide all of the dried blook with a darker costume…”
Live action Deadpool appeals to me enough that years ago I picked up the Deadpool and Negasonic Teenage Warhead two-pack. I sold the Negasonic figure, but kept Deadpool as that was what I wanted. And it’s one of my, if not the, favorite Marvel Legends figure in my collection. I struggle to think of one I enjoy more. It wasn’t without some flaws, but generally speaking, it’s a fun figure with a great likeness. When it was announced that a new movie was coming I figured I’d be interested in any new Deadpool. If there was one thing about the old figure I wasn’t that crazy about it was the very muted shade of red. The new movie rectified that with a much brighter version of the Deadpool costume and it even added some little gold accents. The only question was how different was the figure itself from the one I already own?
Head is probably a little too big, or the body too small, but the details of the costume are pretty accurate.
Turns out, a lot. I’m guessing Hasbro had the digital files of that old figure still and used them to update the costume and create this new figure, but as far as cutting steel molds go this figure is almost entirely new. I can only say for certain that the hands are old as are the holsters for his swords (and the accessories are reused too), but the rest is different. Most of the differences are subtle as the previous figure had some distress marks throughout the suit and more visible wrinkles which this version has done away with. The chest has a different pattern to the costume as well as do the boots and holsters for the sidearms. It still very much feels like the same figure, but it’s different.
“See, I have swords, which are way less painful than blades that pop out of your fist.”
These differences all help to make this new version of Deadpool look like the one we see onscreen in Deadpool & Wolverine. And that makes a lot of sense since that’s what it’s supposed to do. The figure stands around 6.325″ making it a touch shorter than Wolverine. Jackman and Reynolds are close in height in real life with Jackman the slightly taller of the two, though onscreen they appear pretty damn close to equal. I’ve seen some express dissatisfaction with this Deadpool figure’s height, but I’m not bothered by it. The figure is mostly red plastic with the black and gold parts painted on. It has a better paint job than my old figure as the eyes are clean and there isn’t much overrun with the detail work. Some portions of the black are cast in black plastic. The holsters, for one, as well as the shoulders, wrist straps, and gloves. The feet are black as well with the red painted on and there the finish isn’t the same as it is with the other red. Perhaps it’s on purpose, but the red on the top of the boots is very glossy and a little darker than the rest of the suit.
“Ohhh, I should have seen that coming!”
The overall proportions for Deadpool are solid, certainly better than Wolverine. The head is probably a touch too big, but I like the shoulder placement and the torso shape. Could he be a little beefier? Yeah, probably, but it’s fine. Really, my only gripe with the look of the figure is that the bare plastic does give it a cheap look. This is consistent with a lot of Hasbro releases and even some higher end stuff like S.H.Figuarts. Give this guy a coat of paint and he probably would look a whole lot closer to “premium.” As it stands, he still looks good and the lighting of your display will either help to make the figure look better or look worse.
Oldpool has the edge when it comes to accessories.
Unfortunately, as was the case with Wolverine, this Deadpool figure is lacking some when it comes to accessories. Only in this case it’s made more obvious since we just saw the previous Deadpool get re-released with a bunch more stuff. For weapons, you get what is expected: two katana, one knife, and two sidearms. The sidearms are no longer glued into the holsters and are fully useable. The previous movie Deadpool had them glued in for some reason, but he also came with two additional handguns which were molded to make them appear to be mid-fire, which was cool. We don’t get those here nor do we get the extra hands. This Deadpool just has a set of gripping hands and trigger hands. The previous Deadpool had a set of fists and and a set of open, style posed hands. Deadpool is a very expressive character so it’s a shame to see the extra hands get axed. I’m not disappointed that Hasbro didn’t include the stuffed unicorn accessory again, but why not the hands? We’re also still lacking an unmasked portrait. It’s something consistently missing from movie Deadpool figures. Are companies just cheap and don’t want to pay for the likeness rights? Or is Ryan Reynolds averse to having his likeness (albeit a heavily distorted one via the makeup) cast in plastic for some reason?
“I do not respond well to my own failings!”
The sculpt for this guy may be new, but the articulation is exactly the same. It’s just as functional as before, but also just as dated as Wolverine. The main issue is the lack of a ball joint in the torso. Instead, we get the old ab crunch with a waist twist. It’s more of an issue with Deadpool since he’s basically a ninja and is a character that should be able to hit as many poses as humanly possible for an action figure. His gripping hands also have the wrong hinge for articulation as they’re sporting a horizontal one. The trigger hands have the proper vertical hinge, but they unfortunately are too loose for a satisfactory grip of the swords.
Some effect parts and more hands would have been cool, but honestly this is a pretty solid release.
This Deadpool is basically more of the same when it comes to movie Deadpool figures. If you like the old ones and want to see a deco more appropriate for Deadpool & Wolverine, then by all means go ahead and grab this one. It’s not as good a value, but he probably has the bare minimum, at least. If you don’t like the articulation of the old release or really lament the absence of a Ryan Reynolds portrait then this release won’t solve those problems for you. I ended my Wolverine review from the same film with the thought that while it was a flawed release, it nailed the Hugh Jackman portrait which was something other action figures weren’t providing making it perhaps a worthwhile investment. With Deadpool, the opposite is true as we are likely to receive a superior action figure in the form of the Bandai S.H.Figuarts movie Deadpool which has more hands, expressions, and effects. It’s also more than triple the price. If you only want one Deadpool and aren’t opposed to spending more money, that’s a figure that might make you happier. If cost is more of a priority then this will probably do fine.
We have more Deadpool & Wolverine and just Deadpool in general:
Look through my various toy reviews and you’ll probably notice that I’m not much of a Marvel guy. That wasn’t always the case for me though as I was huge into Marvel Legends once upon a time. I basically stopped around the time Hasbro was awarded the Marvel license. I felt there was a dip…
In celebration of the release of Deadpool 2 I thought it would be a good opportunity to take a look at one of my favorite action figures from the Marvel Legends line – Deadpool! Marvel Legends is a series of action figures that originated with the now defunct ToyBiz and is now owned by Hasbro.…
It might be hard for the young folk to believe, but once upon a time movies based on comic book characters were treated like box office poison. Unless you were Superman or Batman, you just didn’t belong in cinema. Even those characters weren’t bulletproof. Superman had a nice run, but fizzled out with the fourth…
An unexpected addition to the 1990 TMNT movie collection from NECA Toys.
2024 marks 40 years of Teenage Mutant Ninja Turtles and several companies have been marking the occasion in their own way. NECA, who has been flooding the market with TMNT action figures for several years now, celebrated the milestone with a San Diego Comic Con exclusive two-pack of The First Turtles. Based on the original sketches from co-creators Kevin Eastman and Peter Laird, the action figure set made a lot of sense as a 40th anniversary tie-in and as a Comic Con Exclusive. San Diego Comic Con may be the biggest convention in the world each year, but New York Comic Con is a pretty big deal too and since NYC is where the turtles call home, it made sense for NECA to have something special cooked up for that convention too. And they did and I think it caught everyone by surprise.
Eastman is obviously not the first human character in the line.
When the 1990 film Teenage Mutant Ninja Turtles was shot, there was a planned cameo from co-creator and current NECA collaborator Kevin Eastman. He was to play a garbage man and I assume he would be present in the aftermath of the battle with Shredder (and I think he is in the background). The scene was supposedly shot, but cut, highlighting the need for a better physical media release of the film that actually includes some of the shelved content. Even though the cameo may have been cut, NECA felt the need to celebrate it with a Kevin Eastman action figure as he would have appeared in that movie. It’s a great idea, and since it’s coming from the movie subline it means Eastman can be shown as he would have appeared in 1990. While it would be fun to see his comic book caricature turned into a figure (along with Laird), it’s definitely cool to get just a regular old Kevin first.
“April O’Neil here with the only eyewitness to tonight’s melee in the Bronx who has generously offered to provide a sketch of the strange creatures he saw tonight.”
You may want to watch your back, Kevin.
NECA sold the Eastman figure at NYCC and also on its website beforehand. And he sold out fast. It caught me and probably many others by surprise as it felt like the old days when the only way to get NECA’s TMNT product was through quick-selling online drops. The figure comes in a standard NECA Ultimates box designed by Chris Raimo. The figure was sculpted by Kyle Windrix and Trevor Grove with paint by Geoff Trapp and Mike Puzzo and some fabrication elements by Anthony Minichino and Brodie Perkins.
“Make sure you get my good side, dude.”
Eastman stands at roughly the 7″ mark putting him on more or less equal footing with April and Casey in the line. He’s clad in the black jumpsuit of a garbage man with a flannel shirt underneath and brown work boots. He has an almost amused look on his face, like he’s just happy to be here, and his trademark curly hair and moustache are in place. It’s a simple look and the paint turned out well. There’s a subtle sheen to the folds on the jumpsuit that makes it seem like it may have been nylon. The name tag is very legible on the chest and the flannel pattern is pretty sharp. The only negative is the paint on the hairline, particularly the figure’s right side, is not as sharp as it should be.
The most important accessory.
And I thought it was going to be just another boring manhole accessory.
Accessories for Kevin are sparse, but he probably has enough. Since he’s a garbage man he has a garbage bag. It’s a shiny, black, plastic, bag that’s tied off and likely stuffed with a sponge-like material to give it shape. It is what it is. Kevin has one gripping left hand and a pencil gripping right hand plus four pencils to go with it. The pencils, or pens, are just gray which is a little disappointing. Maybe they match the scene, but a more traditional orange #2 pencil would have looked a little nicer. He also has a clipboard with doodles of the turtles on it. They are done in an Eastman style and I’m guessing these are actual Kevin Eastman drawings shrunk down. It’s the accessory most are likely to display the figure with. Lastly, there’s a manhole cover which seems kind of dull at first. It reads “Lairdman Island,” a reference to the film and a portmanteau of Laird and Eastman. Flip it over though and you’ll find a recreation of the actual manhole cover that was placed in Dover, NH, birthplace of the TMNT, earlier this year. It has the address sculpted in and there’s a silhouette of the four turtles from their debut issue. I still need to get up there to see it for myself (my sister even lives in Dover) to properly compare, but this is a neat little accessory.
“I’m not sure you really captured the likeness here, pal.”
Articulation for Kevin is pretty bad. The hair keeps his head from doing a whole lot, but he can look down at his clipboard at least. Arms are basic and the elbows are single-hinged and the hinges on both hands are the standard type which I suppose is fine. There is a waist twist, but it has minimal range and the hips do almost nothing. They’re the old pin style too which I have a strong dislike for. I’m guessing these legs are reused from another figure, but I have no idea what. I assumed he was going to share parts with the jumpsuit Professor Perry (which I passed on), but that doesn’t appear to be the case. Knees are single-jointed and they’re fine. Ankles don’t really do anything.
“The results are in, Mr. Eastman: you ARE the father!”
The sculpt is pretty good and it’s executed well enough when it comes to the paint, but as an action figure this is a pretty bad release. Does that matter? Probably not. A Kevin Eastman Comic Con Exclusive action figure based on a cut scene from a 34 year old movie fits squarely in the novelty category. And as a novelty and a tribute to the franchise it’s fine. I’ll try to find something to do with the manhole cover while the trash bag will just live in the box. Kevin will be able to stand among my movie figures happily doodling on his clipboard and that’s good enough for me. Hopefully he’s joined by Peter some day. Unfortunately, if you weren’t able to get this guy he’s sold out. He was slightly expensive for a NECA release at 40 bucks not including shipping. If you missed it and absolutely must have it as part of your collection, I personally wouldn’t go beyond 60 bucks. And that’s just for someone who feels like their collection would be incomplete without it. If you only had a passing interest, or were hoping to do more with the figure from a posing perspective, I wouldn’t go nuts trying to track this down as I don’t think it will be worth it for you.
Just a guy and his kids.
If you feel like celebrating 40 years of Teenage Mutant Ninja Turtles then you have come to the right place:
As the story goes, one night Kevin Eastman was drawing with his friend and partner-in-comics Peter Laird when the idea to doodle a ninja, anthropomorphized, turtle entered his brain. Laird was so amused by this drawing that he too drew his own take on it. What was done just to amuse each other eventually turned…
Say the name “The King” to a comic book fan and they will immediately know of whom you speak. Jack Kirby is a titan in the world of comics. Creator or co-creator of a great many characters known throughout the world today, it’s hard to imagine what a comic book would look like without his…
NECA’s Teenage Mutant Ninja Turtles line has so been so successful that it’s allowed the company to branch out. It wasn’t that long ago that Playmates was the only game in town when it came to TMNT action figures and the company showed little to no interest in releasing anything other than the turtles themselves.…
It might be hard for the young folk to believe, but once upon a time movies based on comic book characters were treated like box office poison. Unless you were Superman or Batman, you just didn’t belong in cinema. Even those characters weren’t bulletproof. Superman had a nice run, but fizzled out with the fourth flick while Batman basically did the same in the 90s. Still, 1989’s Batman was a massive hit in all of the ways Hollywood dreams up. It not only did well at the box office, but it was a cultural phenomenon with a hit soundtrack, tons of merch, and home video sales to back it up. Because it did so well, studios started to look at Batman as the blueprint for what could work in movie theaters when it came to comic book characters. If you couldn’t fit a franchise into that mold, then why bother? That’s probably why Spider-Man could never get off the ground despite someone always holding the option to start a film franchise. It’s also probably why a little known comic book hero in Blade did manage to sneak into theaters and actually do fairly well. And it meant that when it came time to bring the X-Men to film that franchise needed a dash of Batman.
“Why are you so short?”
This mainly manifested in the film’s look. Audiences weren’t going to believe a bunch of people in blue and yellow spandex could save the world. They’d look stupid, so out with the colors and in with the black. Almost all black, and since the film ended up being a hit I guess the lesson to take from X-Men was that approach worked, but was it the only way? When we finally made it to the now Marvel Cinematic Universe there seemed to be a willingness to just take the costumes people liked in print and just go with it. The Fantastic Four film franchise isn’t celebrated as a massive hit these days, but it made money with blue spandex. Spider-Man wore his traditional costume and faired well, so when Marvel got to Iron Man they basically let him do the same. Along with Captain America and, to some extent, Thor. Fox’s X-Men franchise still tiptoed around the subject, but eventually some of those comic blues made it in, but one thing we never got was Wolverine with the mask, with the yellow (or brown, for that matter), until a little movie called Deadpool & Wolverine.
Is this what we’ve wanted the whole time?
I didn’t do a review of Deadpool & Wolverine here. I probably should have, though it would have been lost in the many other reviews of the same. If I were to summarize it briefly, I’d call it Fan Service: The Marvel Way. It was plenty fun, maybe a little too long, but an overall enjoyable movie-going experience. It sure seemed like a big reason for the movie to exist was just to get Hugh Jackman’s Wolverine into a movie with a proper Deadpool (not that abomination from the Wolverine movie) and in a costume more reflective of his comic book self. Mission accomplished. The only surprise was that Hasbro wasn’t at the ready with Marvel Legends figures at opening. Now, I suspect there’s a good reason for that. Marvel and Disney probably wanted to keep the whole Wolverine look under wraps for as long as possible, at least until that first big trailer, and in doing so froze out action figure makers. They need a long lead time to get product on shelves and it probably wasn’t doable. They did manage a filler wave of older releases to try and placate fans, but now we finally have the first go at proper Deadpool & Wolverine figures and today we’re looking at Wolverine.
And who could forget his trusty sidekick, Deadpool?
Wolverine stands at approximately 6.5″ to the top of his noggin and comes clad in that bright yellow and blue suit you’ve likely seen by now. By default, he’s sporting his cowl which is interesting because this figure depicts a version of the character unseen on the screen. That’s because he has his yellow sleeves. If you’ve seen the movie, and I suppose light spoilers if you have not, then you know he begins the movie with the yellow sleeves, but eventually discards them. Before doing so, we never see him with the mask on. That’s saved for a big reveal later. He could have worn the mask at any time so I guess this figure is sort of like a depiction of the character before we ever meet him when his life was presumably better. And had Hasbro withheld the masked portrait people would have likely complained. They’re complaining anyway, but we’ll get to that.
I hope you like yellow.
What stands out with this figure right away is holy yellow, Batman! Or Wolverine. The yellow is very bright, though not necessarily inaccurately so when compared with the film. It’s just that in the film Wolverine acquires a fair amount of grime pretty quickly which this figure does not reflect. The yellow is also bare plastic which gives it a cheap look. Yellow is a tough color to sell and it would not surprise me if a lot of would-be customizers out there give this guy a wash to dampen that effect. There is a lot of blue on the costume as well which is mostly painted on. It’s fairly clean and Hasbro also painted the little, silver, rivets on the front of the costume which is a nice touch (they’re unpainted on the back, a fairly common tactic utilized by Hasbro). The X emblem on the belt looks nice and there’s black mixed in with the blue on the gloves and boots. The yellow is also all textured so it’s not a smooth figure. It almost has a sandpaper feel to it.
Deadpool and Wolverine from the film.Proportions aren’t great here.
There are good and bad things to be found with this sculpt. The somewhat cheap look is one of those bad things and another would be the almost frumpy look Wolverine has. If you’ve seen Hugh Jackman in the role, then frumpy is probably one of the last words one would use to describe Jackman’s Wolverine. We see a lot of these issues with the comic Legends figures, but it’s largely a matter of proportioning. His chest is very narrow and there isn’t much thickness to it either. It doesn’t taper in like a human’s torso (or superhero’s) should and the head is too big. The legs seem short and he’s got these wide, birthing, hips. Now, this is all an issue when you have the figure just standing straight up and down on your shelf. Widen his stance and the issue is mitigated, but there’s no hiding completely that this body shape is off. And that’s a shame, because I bet we’re going to see most of this figure again at some point in the future. The other noticeable blemish that shows up more in pictures than in-hand is the different shades of yellow. The torso is almost a pale yellow while the limbs are more vibrant. The torso feels a touch harder and it’s thinner which may be the cause of the discoloration because both are cast in yellow as opposed to painted.
That’s a good looking face.
What undeniably turned out well though are the portraits. Well, specifically one portrait, but the masked portrait is solid too. It’s a good likeness of Jackman in the mask from the film which, honestly, looks a little goofy, but this is what we wanted, damn it! The yellow paint on the bridge of the nose is a little dingy, but that’s what happens when you paint yellow over black. The facial hair is a little messy too and there’s some overlap of the flesh on the edges of the jaw opening. It will look okay on a shelf, but up close isn’t all that impressive. And that’s assuming you want to display Wolverine masked and I’m not sure many will because this Jackman alternate portrait is fantastic. I don’t know if any other company at any other price range is going to top this likeness. It’s uncanny how lifelike this looks. Sure, get up real close and you see that almost pixelated paint app that’s a result of the face printing Hasbro uses, but at half an arm’s length it’s going to look awesome. The paint for the beard will probably vary a little from figure to figure and there’s a missed spot near my figure’s right ear, but overall I am very happy with this portrait. It’s the main reason why I decided to get the figure since the import versions look like they won’t even have a Jackman portrait.
The extra set of hands are kind of worthless. Just stick with the claws.
Accessories with Marvel Legends are rarely a selling point these days. Aside from the stellar unmasked head, this figure just comes with a set of clawed fists, a non-clawed right fist, and a trigger finger left hand. He has no gun to shoot so I guess Wade will have to loan him one. The clawed hands are probably what most care about and they’re fine. Claws are fairly straight and look good. The yellow paint on the hands is a little like the yellow paint on the nose, but what are you going to do? My hands did have some excess yellow paint in places, but I got it off with a Magic Eraser sheet. Obviously, the big omission here is the lack of optional arm parts. I mentioned earlier how we only see Wolverine in the film with bare arms while wearing the mask and that was certainly needed here. Was Hasbro not aware of that detail when the figure was designed? It’s possible. Or, they looked at all of this unique tooling they had to do in order to create this figure and decided a double-dip was in order. They can re-release this figure, throw in some arms that may not even need to be tooled, and call it a day. Maybe we’ll get a new head or something. An angry masked head, a yelling non-masked (which they could also repurpose from another figure), or maybe just this figure with bare arms. Personally, the bare armed look is the one I like best. Wolverine just looks weird in sleeves, like he’s wearing pajamas. Because it feels like such a certainty, I definitely don’t blame anyone willing to play the waiting game.
“Oh great, now there’s two of them.”
Wolverine’ articulation is a little different from what we’re used to. The head is a double ball peg and while it’s not executed perfectly, it is better than most Hasbro double ball pegs as Wolverine can look up, down, and there’s some tilt at play. He doesn’t have a neck joint though so those low Wolverine crouches aren’t really in play. The shoulder joints are basically big ball pegs. It’s what a lot of import companies use, but they do it in tandem with other joints to create more range. This one doesn’t. There’s a black, floating, cap and some space cut out of the chest to get a little range going across the chest, but it’s minimal. There’s almost no range going back so I wouldn’t even consider this a butterfly joint of any kind. Perhaps worse is that the shoulder pads just peg onto the shoulder itself. And it’s a big old peg with no play which means the shoulder pads are static and will hinder range at the hinge. He can’t raise his arms out to the side a full 90 degrees and even rotation is a bit cumbersome. The bicep, double-jointed elbows, and wrists are fine. The trigger finger hand has a horizontal hinge which is mostly worthless.
“And I thought Gambit was horny.”
The torso features an old school ab crunch. It goes back basically one “click” and forward two clicks. There’s a little nuance in between clicks, but not much. It’s very limited and the lack of a ball joint there is unfortunate. The waist twist is just a waist twist. The belt is floating so it can get out of the way. The hips are big ball sockets. He can almost hit a split and kick forward about 90 degrees with no room going back. There’s a thigh twist, but it breaks up the pattern on his thighs which is one of those things that may bug me more than most. The double-jointed knees work as expected as do the ankle hinges and rockers. The gloves and boots appear to both be separate pieces, but there’s no rotation to them. Overall, I’d call the articulation mediocre to average. Wolverine not being able to rear back with a fist is pretty disappointing and I don’t know why they let the shoulder pads become such a problem. I’m guessing there was a reluctance to break up the sculpt in the chest, but I personally would have done so for a ball-jointed diaphragm joint as well as a neck joint. I guess we’ll have to look to another company if we want a super-articulated Wolverine.
Friends forever?
Hasbro’s first stab at Wolverine from Deadpool & Wolverine is a bit of a half-baked release. It’s lacking in accessories including a major one and doesn’t hit a homerun with the articulation. It’s sacrificing articulation for sculpt, but the sculpt isn’t exactly deserving of such reverence. It does however deliver an incredible likeness of Hugh Jackman in the form of the unmasked portrait. Even with the limited articulation, it’s still possible to pose away some of the sculpt’s shortcomings. Because fans have been waiting so long to see Jackman in such a costume, it feels a little bit like this is a figure from a company that knows the fans were going to eat it up no matter what. And as a result, they only managed to deliver a satisfactory product. Hey, I’m clearly part of the problem in this instance since I bought this even though I really wanted a version of the character sans sleeves. And I fully expect such a character to come out in 2025. Knowing it’s likely to happen makes this a hard recommend. If you just want an MCU Wolverine right now and the imperfections don’t bother you then I guess go for it. I think the future S.H.Figuarts Wolverine will be a better action figure, but it too appears to lack a set of bare arms and I don’t think it’s even coming with an unmasked head. Plus it costs more than triple the amount of this one so I guess what I’m saying is I understand anyone who decides that this is good enough for now. I clearly did and while I’m not entirely satisfied with the decision, I’m not exactly regretting it either. Maybe I will when and if I replace it with something better, but who knows when that will be? At least for right now I get to enjoy tiny Hugh on my desk.
Do you like Wolverine? Do you like Deadpool? Well, I’ve got some other stuff you can check out:
The toyline of my dreams was announced last October. In celebration of the 30th anniversary of the television series X-Men, Hasbro is doing a dedicated line of Marvel Legends with figures based on the look of the show. The show was obviously inspired by the designs of Jim Lee, but there are differences in the…
Look through my various toy reviews and you’ll probably notice that I’m not much of a Marvel guy. That wasn’t always the case for me though as I was huge into Marvel Legends once upon a time. I basically stopped around the time Hasbro was awarded the Marvel license. I felt there was a dip…
When San Diego Comic Con was cancelled for 2021, many of the entities that would have sold exclusive merchandise at the event pivoted to web sales. And since the 2020 iteration of the famed event was also canceled due to the COVID-19 pandemic, many seemed to expect the same for 2021, or the massive delays…
Hello daddy. Hello mom. I’m your buh-buh-buh-buh-buh-buh-Bellybomb!
Sometimes, a character design so fun and outrageous can be enough to motivate one into dropping $35 on an action figure. Such was the case with NECA Toys’ Bellybomb figure from its subline of Teenage Mutant Ninja Turtles action figures based on the characters from the Archie Comics series. Of course, in this case it helps that I’ve been collecting most of the TMNT figures put out by NECA so I was predisposed to getting this guy when he dropped, but mostly I wanted him because he just looks so weird. I know next to nothing about the character. He’s some kind of alien or Dimension X creature and he’s a bad guy for the most part. Mostly though, he’s a dude with his mouth in his stomach and eyeballs in his palms – he’s a freak!
You might think he only has one eye at first, but he actually has three.
Bellybomb, to me, looks like a character that belongs in The Real Ghostbusters toy line from Kenner back in the day. A big eye, sharp teeth, and a wacky design. I remember having a football player in that line and his entire back lifted to exposed a monstrous mouth. Bellybomb can never pass as human or anything, but his anatomy is so very Ghostbusters. I wish I knew who created him so I could properly credit the artist responsible for this design, but I wasn’t able to find anything online. Maybe it was Chris Allen? Ryan Brown? I don’t know, whoever did though my hat is off to you. The character has been brough to life by sculptors Brodie Perkins and Tomasz Rozejowski. I believe it was Perkins who did the main figure and I’m guessing Rozejowski either did the gun or his little buddy (we’ll get to that). Paint is done by Geoff Trapp and Mike Puzzo and once again Ken Mitchroney is on hand to do the artwork on the box.
“Hey man, how’s it going?”
Bellybomb is a figure that gets by on this outrageous design. He stands around 6.375″ to the top of his…head, and is closer to 6.75″ if you factor in the horns. He’s a bit of a chunker since the torso is just a giant mouth with an eyeball rising out of it. His skin is a very fleshy color with numerous wrinkles and if you want to compare him to a certain piece of male anatomy there’s little I can say to dissuade you. It’s a valid comparison and just adds to the grotesqueness of the character. There’s lots of black linework while his clothing is pretty basic, but also bright colored. He has a blue dress shirt which is obviously unbuttoned to expose that massive maw. The hot pink pants and blue boots make him look like a creature out of the 80s, though he’s technically a 90s invention as far as I know.
“What the heck are you?!”
The two things that stand out with this sculpt are the mouth and the eye. The mouth is full of sharp, white, teeth while the interior is painted black with a big, red, tongue. The teeth are legitimately sharp so if you want to open the mouth try to push on the lip instead. He has a big, blue, eye at the top of his head that’s well-painted and sits cleanly in the socket. It’s moveable as well. It feels quite loose, but it stays where it’s supposed to as long as you’re not shaking the figure. Each of his hands also has an eyeball sculpted and painted on the palm which is done very well. Even the fist hands leave the eyeballs exposed which is a nice touch.
“What is this greasy concoction?”“Oh my god! Pizza, where have you been my whole life?!”
And aside from that, there isn’t much else to talk about with Bellybomb. His neck, I guess, which the eyeball sits on is articulated at the base and at the top. It can be positioned very well with plenty of room for nuance. The mouth opens and closes and it looks pretty good in both positions. The rest of the figure does very little, The shoulders are standard ball-hinges while I can’t get the elbow hinges to do anything. There’s rotation there, but that’s all. Hands swivel and hinge with the trigger hand being vertically hinged so that’s a plus. There is a waist twist while the hips and knees, despite being double-jointed, are pretty limited. The ankles hinge forward and back a bit with an ankle rocker, though the right ankle on mine is pretty loose.
New Krang is so cute!And now Slash gets a buddy.
Bellybomb is mostly going to just stand there and look at stuff with his big eye or maybe stuff things in his mouth. He also doesn’t come with much. He has a pair of fists, gripping hands, open hands, and a trigger finger right hand. He has a big rifle that’s nicely painted and appears to be accurate to the comic, but he can only hold it with one hand and there are no effects for it or anything. The only other thing he comes with is his little buddy and accomplice in crime, Krang. Krang in the Archie books features the same, general, design as the Krang from the cartoon except he’s a whole lot more adorable. He’s a cute little blob, and I love the very toon-like eyes. His tentacles can be posed a little bit and the underside of the figure is sculpted to be curved so he can sit in Bellybomb’s hand or on Slash’s shoulder, which is how he got around for a time in the comics.
Bang! Bang!
Bellybomb is basically a slam dunk of you’re into this design. He looks awesome, I’m smitten with it, so it’s an easy recommend. He’s not going to pose as well as some of the other figures in your collection, but I think the figure more than makes up for it. Maybe the package is a little light on stuff, but the included Krang is a nice touch. And if you’re turned off by the coloring, NECA has a blue variant of this figure on the way based on his look from one of the covers. I was able to track this guy down at Target. He wasn’t advertised as being part of the Cowabunga Collection from August, but he arrived at basically the same time. I never did encounter this one in-store though and had to stalk the online listing where he’s been going in and out of stock since August. It’s likely a wider release will follow at some point so if you’ve been having a hard time tracking this one down just be patient as he’ll likely wind up on online retail outlets soon enough.
Check out more from NECA’s line of action figures from Teenage Mutant Ninja Turtles Adventures:
.The NECA Cowbunga Collection is a content creator’s dream. Here we are deep into October still talking about figures that dropped in August. This time it’s another Teenage Mutant Ninja Turtles Adventures action figure and it’s fan-favorite Mondo Gecko. Most TMNT fans probably know Mondo from the Playmates action figure line. He also made the…
We are rolling right along with more reviews of NECA’s TMNT Adventures line of action figures and we’re also staying within the realm of Stump Wrestling. When the turtles wound up in the intergalactic wrestling federation, they didn’t just encounter aliens, they also encountered an old foe. I don’t know how Leatherhead wound up as…
Back when Teenage Mutant Ninja Turtles ruled the world, there was a lot of brand synergy between all of the various media being generated by this one mega popular piece of intellectual property. The comics came first followed by a toyline which necessitated the creation of an animated mini series to basically serve as a…
The Nostalgia Spot 