Tag Archives: action figures

May 29, 2020

Boss Fight Studio Bruiser the Betelgeusian Berserker Baboon (Bucky O’Hare)

By Joe

The baddest baboon in the Aniverse has arrived!

2019 was not a plentiful year for Bucky O’Hare product. After receiving my two-pack of Toad Storm Troopers from Boss Fight Studio on Boxing Day 2018, I had not received a new Bucky sculpt until now. Not that 2019 was necessarily light on Bucky developments, it’s just the nature of the game when a small company invests in a niche property. Any company that makes Bucky toys, and there is currently only one such company, can’t just make a bunch of product and ship it to stores expecting a gradual sell-out. Rather a more cautious approach needs to be undertaken that involves basically doing one figure at a time and then putting it out there on pre-order for a bit to gauge interest before ultimately committing to a big factory order. It also doesn’t help when the figure is based on a licensed property and needs to go through an approval process with the license owner to make sure everything is all good. And when you add a global health crisis to the mix, well then nothing goes as planned.

Such is the reason why it has taken more than a year to make this figure of Bruiser, the Betelgeusian Berserker Baboon, a reality. He is the first in what toy company Boss Fight Studio is calling the Bucky O’Hare Deluxe line of figures. He’s much larger than any of the figures that have come before him, so much so that he had to forego the usual blister packaging in favor of a window box. And since he’s a lot bigger that also means he’s a lot more expensive which makes even commissioning the big guy a bit of a gamble on the part of Boss Fight Studio. Since he did indeed end up getting made, it would seem that gamble has paid off and it’s a good sign that the fanbase of both Bucky O’Hare and Boss Fight Studio were willing to sink approximately $55 into Bruiser to get him onto collector shelves where he rightfully belongs. And I can’t stress this enough, but he was worth the wait!

Bruiser represents a first for the Bucky line in that he’s the first figure released that is based on a character who originated in the cartoon series. The cartoon is where most people familiar with the product have the greatest affinity for, so it’s not really a surprise to see Boss Fight head in this direction. Bruiser is the younger brother of Bruce, the engineer on the Righteous Indignation who sadly didn’t make it out of issue #1 or episode #1. Perhaps seeing the potential in having a baboon on the crew in a permanent role, Bruiser was added for the cartoon in episode #2 as basically some hired muscle. Toads have a natural fear of baboons so for the writing staff he represented an easy way to end a conflict as he basically just needed to show up to scare away the bad guys. He also formed a bit of an odd couple with Blinky, the diminutive android on the crew, and their relationship was quite cute. He was popular enough that he was also a part of the Hasbro series of toys and he came with a rifle, even though he basically just uses his hands in the cartoon as weapons.

That’s one happy ape!

Even though he began as a cartoon character, he’s still a Larry Hama creation. All of the characters were and they all had artwork created by Continuity Comics to accompany them which I assume went into a series bible for the show. In moving from concept art to cartoon, some changes were made to make the character either easier to animate or to make them stand out better in terms of colors. As has been the case with all of the figures from Boss Fight Studio, Bruiser is based on that concept art as opposed to having a more toon accurate color scheme. This means black armor instead of blue with a red strap instead of pink. His gloved left hand is also colored correctly as opposed to the old Hasbro toy which didn’t bother adding any paint (and annoyed me to no end as a kid). His fur is also a touch more brown which just plain looks nicer than the old bright orange. Basically all of the yellow parts on his show costume are gold here making this Bruiser seem like the luxury model compared with the toon.

You can even remove his gauntlet if you wish to have your Bruiser cosplay as Cloud City Luke Skywalker.

The sculpting on Bruiser is something to behold. He’s a big, beefy, chunky, monkey and Boss Fight Studio making this for the adult collector means those spikes on his costume are quite the little hazards. The factory head has this lovely side-smirk going on that should remind folks of the Hasbro toy. He’s dense, and quite heavy, but not so heavy that he topples over. The belt and loincloth are a separate piece of plastic and so is the gauntlet on his left arm. When you pop off that left hand, you can even slide it off exposing the sleeve underneath. I love all of the textures on this guy be it the fur on his arms, the ridged portions of the armor, or the gear-like texture on his boots. He’s just a joy to hold and experience.

Like the other figures, Bruiser has pegs on his belt that allow him to holster his weapon for when he wants to munch on a banana or get his hands dirty.

The paint application for Bruiser is pretty simple, which applies to this line as a whole. There’s a lot of colored plastic, especially the fur, which does sometimes give the figure a shiny, plastic, appearance. It is a toy, after all, so it should look plastic, but a paint wash might have toned this down a bit. The paint on the portions that aren’t colored is clean and simple. Some of the spikes have a touch of paint chip at the point which is something that’s going to happen with that type of accent. I love the tan color of his glove and boots and it just mixes so well with the brown fur. The only areas that could stand to see some improvement is the right shoulder and the big fangs on his factory head. The shoulder has some gray plastic in the middle to blend it with the steel shoulder pad that is mostly unpainted on my figure. I wouldn’t go so far as to call it an eyesore, but it is noticeable. The fangs are a bit fuzzy at the edges and the part where the left tooth overlaps the nose chain is a little messy. This is pretty minor stuff though as it’s only noticeable upon close inspection.

Ever see a baboon chokeslam a toad?

Despite Bruiser’s size, he still comes with a fair amount of articulation. His head is on a ball joint, though his hunched stature means it doesn’t have a ton of play. He’s got ball-jointed shoulders and hinges at the elbows. There’s no bicep swivel, but I honestly can’t I say I miss it. The hands are on pegs with no hinge, which is par for the course with this line. He’s got a nice ab crunch, a first for this line owing to his size, that can help pivot his upper body and it’s basically completely hidden by the sculpt, which is incredible as ab crunches are often the bane of action figures because of what they do to the sculpt. He can turn at the waist and features ball-joints at the hips. He has hinges at the knee, but because of squat appearance there’s very little functional movement here. He makes up for that though with some impressive double-jointed ankle articulation. They sit on balls and also possess a hinge so you can really rock and roll ’em to adjust Bruiser’s positioning. The articulation as a whole possesses the perfect amount of tightness as Bruiser is really easy to move right out of the box, but when leaving him on a shelf everything stays in the position you left him in.

He works hard, so it’s important to take time out for a little snack.

So just what does $55 get you besides a big old monkey? Pretty much the same amount of accessories fans are accustomed to at this point. Bruiser comes with a gun that’s very similar to the Hasbro one, referred to as a Betelgeusian Lazer Bazooka, which makes sense since both were based on the same artwork. It has a ton of nice texture work and is painted in this chrome color that really helps stand out. This is a character that typically prefers to get his hands dirty, but good luck excluding that bazooka from your display. He has two pairs of hands to mix and match: a fist, an open hand, and a gripping hand for each arm. He’s got a banana to snack on (yellow peel, not one of those purple space bananas) and a secondary head with a big open mouth for munching on the banana or for yelling at toads. The yelling head has a hint of a smile to it as this is a baboon who likes his work. The banana is pretty great looking, I can honestly say I have never seen a finer plastic banana. The yelling head is also delightfully charismatic. He looks so happy! Position with mangling some toads and you basically have yourself a Bruiser in his happy place. I suppose if you’re keeping score with the other figures, he has one less of everything. Bucky, for example, has three sets of hands and three faceplates compared with Bruiser’s two of each. Though in his defense, he has a whole second head as opposed to a second faceplate. More importantly though, I don’t feel like we’re missing anything. I don’t think we need another expression nor do we really need an open right hand or thumb’s up, for example.

The neck joint can be a bit tricky to work with, but it also allows for weird monstrosities like this.

Swapping the extra pieces with the factory pieces is pretty straight-forward. His hands are just on pegs, so you will want to apply firm pressure pulling-out and resist the urge to bend as that could snap the peg. They’re seated pretty snug out of the box, but I was able to pull them off without the aid of heat. His head is a bit trickier because it sits on what is essentially a plastic dumbbell. It’s two balls connecting by a thick cylinder of plastic. One end snaps into the head and the other into the body. When I tried to pull the factory head off the ball seated in the body was the first to give-way. I had to heat the piece in the head socket under running, hot, water to get it out. Once I did that it worked fine, but don’t panic if the same thing happens to yours as it’s meant to come apart. And you may be switching frequently because it’s hard to pick a preferred head. I initially thought I’d be going with the factory head all the way, but that big old smile is just so charming! Maybe Boss Fight should just do a variant in the cartoon color scheme so I can have both on my shelf (hint hint)!

In terms of any shortcomings, there’s very few with this guy. Some might wish for more articulation, but I’m happy with where he’s at as the sculpt is fantastic. There really isn’t a pose I envisioned for him that I can’t replicate. He’s a big brawler and he looks the part. I suppose I would have liked an open right hand so he could do a big scary, monkey, pose with both open hands over his head. If anything though, I’d sacrifice both extra hands that he came with in favor of a toad head accessory of a terrified Storm Toad. It would be a lot of fun to have some screaming toads, but if he came with one such head then I’d be wishing he came with more! Maybe if he sells well enough to warrant that Aniverse variant, Boss Fight could consider such an accessory. They could even ditch the gun if it saves them money since I don’t think he ever used one in the cartoon. It’s probably more likely though that if such a head were made available it would be via an accessory pack or something.

The crew is looking a lot more formidable these days.

There may have been a pretty sizable gap in release between Bruiser and the toads, but that doesn’t appear like it’s going to repeat. Last summer, Boss Fight opened pre-orders for Mimi LaFloo, another character who first surfaced in the cartoon. Her figure was apparently the quickest to ever receive approval from Continuity and she went up pretty fast. At the time pre-orders opened, I had a brief interaction on Twitter with Boss Fight in which they left open the possibility she could see release in 2019. Obviously that didn’t happen, but I’m assuming she’s not too far off if 2019 was ever in play. Probably because of the delay in getting Bruiser out, Boss Fight has not placed a release window, let alone date, on that figure though I’m certainly hoping it makes it out before 2020 ends. Beyond that, Boss Fight did show off a new style of toys for Bucky that are basically mini figures with big heads that come packaged with small vehicles. They have at least made it to the prototype stage, but this is something that could arrive in 2020 though I haven’t seen any additional information on this series.

Just imagine his smile when his little buddy Blinky comes along!

Hopefully, Bruiser is a success for Boss Fight Studio as this would open the door for more Deluxe Bucky O’Hare figures. It’s hard to know just what characters are candidates for this style of release down the road. I think it’s safe to say Toadborg falls into this category and I have to assume he’d be the most likely figure to follow Bruiser at this size and price point. A character I am looking forward to seeing in Al Negator is a harder one to figure. He’s certainly taller than Bucky, but I don’t know that he’s necessarily that much bigger that he requires a release at this price point. He may end up somewhere in between as I suppose there’s no law requiring Boss Fight to release figures at either $35 MSRP or $55 and nothing in between. Regardless of what’s next, I just hope the line continues as my only real criticism with the line so far is that it’s heavy on good guys and very light on bad guys. My toads need someone to boss them around, be it Toadborg or the Air Marshall, especially now that Bucky has a berserker baboon on his side.

Leave a comment | tags: action figures, berserker baboon, boss fight studio, bruiser, bucky o'hare, bucky o'hare and the toad wars, continuity comics, larry hama, neal adams | posted in Comics, Television, toys

May 6, 2020

Boss Fight Studio Holiday Bucky O’Hare

By Joe

Behold! Bucky O’Hare has returned in chocolate form.

It was over two years ago I made a post about the newly released Dead-Eye Duck and Holiday Bucky O’Hare action figures by Boss Fight Studio. That entry was largely just a review for Dead-Eye as I had elected to keep Bucky in box because the packaging was so well done. Now, after staring at the figure for two years confined in plastic I have finally decided to crack it open and give the figure a proper review.

It should be pointed out that this is not space rabbit blackface.

Boss Fight Studio launched its Bucky O’Hare line of action figures in 2017. These 4″ scale figures are loaded with articulation, come packaged in a resealable blister, and all in all just look terrific. They’re the first Bucky O’Hare action figures since the short-lived Hasbro line from 1991 and it’s a line I fell in love with instantly. The line debuted with Bucky himself as well as First Mate Jenny. Not long after, variants followed and one of those variants is the Holiday Bucky O’Hare. He’s referred to as a holiday version, but the holiday that inspired this release is clearly Easter for that’s the holiday most associated with a rabbit. Bucky has been recast in brown plastic to resemble a chocolate Easter Bunny with some pink and white accents. He comes with all of the same accessories as the other Bucky figures and aside from the new deco the only difference is that blister card. The card was updated to capture this chocolate appearance and Bucky’s pistol was also substituted with a blue basket full of Easter eggs. In short: it’s cute.

Yes, the tail is articulated.

If you are not familiar with this figure, let me give you a quick rundown of what it can do and what’s included. Bucky is articulated at about every place he can be. His head sits on a nice ball-joint and includes rotational ears. His shoulders are ball-jointed and he has swivels at the elbows and hinges. His wrists rotate and since his gloves are so large relative to the rest of the figure there’s no additional articulation there. He also features articulation at the waist, tail, hips, knees, ankles and toes. He’s so small that it’s a bit shocking Boss Fight got this much articulation into him, but what’s even more amazing is that the company was able to do so without really harming the sculpt. Not only does Bucky move well, he can also hide that articulation just as well.

He’s got a bunch of goodies for you.

Three faceplates for this guy. Not much variety, but at least it’s something.

To liven up your posing, Bucky also comes sporting a variety of hands and faceplates as well as a pair of pistols. Admittedly, it’s hard to come up with a lot of expressions for a cartoon rabbit, and if there was one weakness with the figure it’s that his expressions aren’t particularly varied. He comes with a default, serious, expression. His other two feature an open mouth with one having a more pronounced frown. You may not even notice what’s different about the two at first because they’re so similar. Bucky also comes with dueling pistol hands, but he can swap either one out for a fist if he prefers to get up close and personal with some toads. He also has an extra left hand that features an open palm, and an extra right hand with the index finger pointing. His cape is also removable and sits in a little peg on his back.

Oh, it’s terrible!

Without heat, I couldn’t get this face to seat properly.

Even with the bottom not quite in place, the figure still displays fine.

After using the hot water trick, I got the faceplate to snap-on, but a small gap remains where the helmet starts.

When I reviewed that first Bucky figure I was more or less blown away, and I still am. There were some things that weren’t perfect, some of which have been corrected with this figure. That first wave of figures was very tight out of the box, but Holiday Bucky was quite easy to pose and loosen up. The hands swap on and off just fine and the cape snaps in place with ease, which is a welcomed improvement. The only drawback that still remains concerns the faceplates. The default one sits on the figure quite nicely and it comes off with a necessary amount of effort to prevent accidental removal. Putting it back in place is also relatively painless as it sits on a large peg and snaps in place in a very satisfying manner. The other two faces are a chore to get on. I could not get either one to sit in place snugly out of the package. Only after heating one with water was I able to get it to sit in place. Even after doing so, it doesn’t appear to sit quite as flush on the top seem as the default head, but it’s not really something that would be noticed by many with the figure sitting on a shelf.

“What is this strange planet, Jenny?”

“Ahh! This grass! It’s attacking me!”

I think the eggs are a nice touch, don’t you?

The full collection so far. The only figures missing are the other Bucky and Jenny variants.

What really motivated me to remove Bucky from his plastic prison was a trip to CVS. I was there for a different need, but did come across the seasonal aisle full of discounted Easter merch. I grabbed a small, yellow, Easter basket and some Easter grass and decided this would be the optimal way to display my Easter Bucky. I filled the basket with some grass, tossed Bucky in, and even added a few Easter eggs I had laying around. The end result is a fun and tad quirky display that actually kind of works in my house as my Bucky toys share shelf space with some Christmas toys 11 months out of the year. I love gimmicky figure variants and it’s why I grabbed this one from the beginning and I’m enjoying having him in all of his festive glory with my other Bucky figures from Boss Fight Studio.

My attempt at duplicating the pose from the NES cover.

He may look sweet, but he still comes packing heat.

If you wish to secure your own, Boss Fight Studio is still selling this figure, but it’s nearly sold out. It originally retailed for a tick higher than the standard Bucky figures because it was produced in limited quantities, but has been reduced to the standard $34.99 MSRP. He’s totally worth it if you like silly figure variants. Hopefully, I’ll have a review of Bruiser in the not too distant future so keep this page bookmarked if you like Bucky O’Hare!

Leave a comment | tags: action figures, boss fight studio, bucky o'hare, easter, larry hama | posted in Comics, Television, toys

April 27, 2020

NECA Mirage Shredder and Foot Clan NYCC Exclusive Set

By Joe

The Shredder had a rough go at things for awhile when it came to plastic. He was featured rather prominently in the old Playmates line, though perhaps not as prominently as one would expect. Playmates never did do a movie version of him, aside from Super Shredder, and his figure was arguably the worst from the inaugural line. All crouched over and such, he was a nightmare to stand and there was little that was intimidating about him. When the Turtles started making a comeback with the collector community, he received further humiliation. NECA released its Mirage Comics TMNT in 2008 and showed off the sculpt for a potential Shredder. That line either didn’t sell well or Playmates interfered because that Shredder was cancelled before release ending the Mirage inspired line of TMNT product. Playmates would go on to do its own retro line dubbed the Teenage Mutant Ninja Turtles Classics. They released the Turtles followed by Bebop and Rocksteady. Results were mixed, but at least it was new product. Playmates shocked the toy world when it unveiled a prototype for Shredder and Krang that looked pretty damn amazing. Had it been released it probably would be the best action figure Playmates ever put out. Sadly, it was not to be and that line was also cancelled. When Playmates did a Mirage inspired line of its own, it too overlooked Shredder. Bandai and SH Figuarts were the most recent to disappoint TMNT collectors. After releasing a wonderful set of turtles inspired by the old cartoon, a Shredder was unveiled. The figure didn’t look as good as the Turtles, but it would have still likely been the best Shredder released up until that point had it been released. As you could have guessed based on where this paragraph had started, it too was cancelled before release.

At least with that most recent disappointment, NECA was there to lift us up! Shortly after that Shredder was unveiled, NECA revealed its own Shredder sculpt based on the classic cartoon that was superior to the Bandai one and bundled him in a massive set containing all four turtles, Krang, and a pair of Foot Soldiers for good measure. It was a set made exclusively for San Diego Comic Con, but all of those figures have since been released to retail. Before that set came along though, there was the 2016 set from New York Comic Con. This one rectified that first disappointing cancellation as it contained NECA’s Mirage inspired Shredder, and to top it off, he was now joined by three of his minions. Better late than never, fans were happy to finally pair those figures from 2008 with some enemies almost a decade later. It was actually the second Shredder released by NECA, as earlier that year the arcade box sets were released with figures designed to resemble how they looked in the classic arcade game from 1989. It’s a set that has proven to be quite profitable for NECA ever since.

Assemble the Foot!

Shredder and his gang of Foot Ninja come packaged in an extremely attractive window box. It’s adorned all around with images from the Teenage Mutant Ninja Turtles #1 where Shredder and the Foot debuted alongside their nemesis. On the back is a photo of the figures with a few extra and Shredder has word bubbles commanding them to attack which are directly lifted from the source material. Flip up the front flap and you’re treated to more images from the comics as well as a look at the figures themselves. Behind them is a nicely done street scene which also makes for a solid photo backdrop!

I guess Donnie is the only one unhappy these guys got let out of their box.

I’ve had this set since it was released, but never opened it until now. When I saw it was being released, I bought it out of a sense of obligation. It was much easier to secure a NECA exclusive back then as I just saw it was available and went ahead and placed my order. My attention though was on the cartoon property and the figures coming out in support of that and when this set arrived I just wasn’t feeling it for some reason. Rather than make room on my Mirage shelf (which is admittedly small), I decided to just position the box behind my set of turtles and leave it at that. It’s an unusual move for me as I am not a mint-in-box collector, and even if I was, the design of this box makes it easy to remove the figures without damaging anything. These guys are designed to be played around with, and finally I was smart enough to do just that.

Let’s get these comparisons out of the way right up front! A trio of NECA Shredders!

All look cool, but all are mostly ineffective at fighting turtles.

“Shredder! Who is this repulsive knock-off?! AND WHERE’S MY BODY?!?”

By now, these Shredder and Foot figures should look and feel rather familiar. Much of the parts utilized here have been recycled from (or will be recycled for) the other Foot and Shredder releases from NECA, excepting the movie line which is its own animal. Shredder is virtually identical to the video game figure, and he also shares arms, hips, and legs with the cartoon one as well. The Foot also share the same parts as their video game counterpart, and the legs, arms, and waist are shared with Shredder as well. The only thing sculpt-wise separating Shredder from his minions is his head and torso. I don’t point this out as criticism or anything, because the main base for these four figures is quite good. They feature ball-jointed heads, shoulders, and leg sockets with double-jointed knees and elbows. There are swivels at the bicep, thighs, and shins and the waist rotates as well. The hands have rotational articulation as well as a hinge joint in each. The feet can pivot at the ankle and rock side-to-side as well. And there’s also articulation at the toe. These guys are rather loaded and capable of quite a few dynamic poses. About the only thing missing is an ab crunch, but that would have taken away from the sculpt. The joints are all nice and tight and should be worked a bit out of the package. The only joints that felt dangerously tight were the shoulders, but I was able to work them loose without the need for hot water or direct heat.

The two Foot Soldiers in this set are basically the same figure. The only thing separating the two is the headband on one, which is actually a bit of an artistic touch as none of the Foot sported this movie-styled headband in the first issue. I’m not super familiar with the colorized version of the old books, so it’s quite a bit of fun for me to see these guys in color. Like the Turtles, there’s a lot of black linework to really bring out that comic feel. NECA could have taken it further with some of that dot work that was on the Turtles and present in the book, but perhaps that would have looked a touch too messy. I really like the soft gray color of the mask and pants as it really gives this version of the iconic Foot Soldier his own flavor. The burnt red tunic is complemented by soft plastic on the skirt portion so the figures have a great range of motion. All of the figures in this set come packaged with fists for hands, but also have a second set of gripping hands. And since they have so many fun accessories, you’re likely to pull those fists off pretty quickly to get those gripping hands in. A nice, firm, tug will lift them out easily enough and the other hands insert without much fuss.

That’s one scary face.

The Foot Elite is a surprising addition to the set as he wasn’t featured in the first issue. These guys came later as they basically took over for Shredder after the Turtles kill him in the first issue (sorry….spoilers!). He’s the same figure as the standard Foot save for his head and cape. The head features a large straw hat that’s non-removable. Beneath that is a flowing piece of red fabric and a metal faceguard concealing an all black face beneath. The faceguard is different from Shredder’s as it has a more pronounced edge down the center and it looks really cool. The red fabric surrounding the head is a hard plastic, but he still has a pretty good range of motion at the head. The cape is made of a soft, rubbery, plastic and has a tattered appearance. The right edge is folded back a little to make the figure look a touch more dramatic than if it just hung there. I love the line detail on the hat and the distress effects on the cape are a nice tough. This guy also has some forearm guards with a square design on them that continues onto his hands. It just makes him a bit more special to look at than the generic Foot. He’s definitely one bad ass looking dude.

And that brings us to Shredder, the figure most probably desired more than any other in this set. Shredder does not disappoint as he looks like he was yanked from the pages of Mirage Comics. The Mirage Shredder is a bit unique when compared with other forms of the character as he featured a more bucket-like helmet. The faceguard has a rounded appearance to it and it covers far more of his face than it did in the cartoon, for example. The rest of the helmet is more or less the same though and it looks great. There’s some nice linework on it and the other metallic portions of Shredder’s costume to give it that comic appearance. I also like that the raised portion of the top of the helmet is a separate piece and those tines that wrap around it like a claw even come off the back of it which looks really cool. Shredder also has a little extra material on his tunic that hangs in the front and back and it too is done with a soft plastic so as not to hinder movement. The shoulder pads and spikes are actually quite firm with the forearm, shin, and hand ones noticeably softer. NECA decided to color Shredder’s face entirely black and go with white eyes. The actual comic switches between this look and a more natural one with pupils in the eyes so this was NECA basically choosing what it felt looked best and I won’t argue with the results.

It’s time for a rumble!

There’s very little to nitpick when it comes to this set of figures. Most of the nitpicks I do have unfortunately rest with Shredder. The fisted hands he comes packaged with pretty much all got warped in the package from what I’ve seen making his blades look sad and pathetic. Thankfully, the alternate gripping hands came out fine and look great on the figure, I just wish NECA had packaged him handless so it could have protected both sets of hands as well as it did the gripping hands. It’s possible some heat could get them back into shape, but I haven’t tried. My Shredder’s left shin guard is also a bit funky. It doesn’t appear to be seated all the way in the peg hole, though since it’s glued in there it doesn’t wobble or anything. It’s mostly only noticeable from the side or rear. The hands on all of the figures are also a touch too stiff and inserting any weapon that can’t be slid in (like the knife with the spiked hilt) is tough. I think I nearly broke the thumb off of one figure trying to get that thing in there. Otherwise though, I really have no further complaints with the sculpt and general look of these guys. NECA did a great job bringing these comic characters to life, so much so that it’s a shame they haven’t really touched the Mirage stuff since.

Check out all of that loot!

If you weren’t sold on the figures themselves, then maybe you will be once you get a load of these accessories. This quartet comes with a bunch of weapons and they’re all pretty damn awesome. Initially, I was a little disappointed there wasn’t one of those three-handled-nunchaku included (as depicted in the comic art on the box), but when I saw what we had I quickly forgot about it. In this box you get two katana, a dagger, a curved dagger with spiked-ball hilt, a ninja star, a large ninja glaive weapon, a large bladed weapon similar to the old Playmates one that fit on the back of Raphael’s shell, and the coolest of all, a mace and some other nasty looking bladed thing joined by a chain. That chained weapon is a thing to behold and I absolutely love it. All of these weapons were utilized by the Foot in the comic so it’s all authentic. The only challenge is choosing what to display and what not to. I do wish NECA was better at giving its TMNT figures a means of storing weapons on their person so I could get them all in, but this is a pretty good problem to have. And to top things off, there’s an Utrom included as well. For those unfamiliar with the comic, the Utrom is an alien race that was the inspiration for Krang in the animated series. They were also faithfully depicted in the 2003 series and the Kraang from the 2012 cartoon are essentially Utrom. He’s an ugly little dude and NECA even slipped in some articulation on two of his tentacles.

If you have a set of the Mirage turtles, then this set is basically a must have as well. The only true negative is scarcity. Though in fairness, this set is not nearly as pricey on the secondary market as some of NECA’s other TMNT product. I guess the company was right when it said the Mirage stuff just isn’t nearly as popular as the rest. That doesn’t mean it’s cheap, but expect to pay around $150 if this is something you desire which really isn’t all that bad for something that’s been out of print for four years. NECA is returning to the world of Mirage for the Loot Crate due out in a couple of months that features a new take on Shredder. Perhaps if people keep letting the company know it wants more Mirage stuff it will eventually happen, but for now this is all we have. What we have though is pretty sweet and these figures look dynamite alongside the Turtles. It may have taken longer than expected, but we have our Mirage Shredder and he was improbably worth the wait.

Now they take their rightful place on my Mirage shelf, right below the Glenn Danzig album.

2 Comments | tags: action figures, foot elite, foot ninja, foot soldiers, kevin eastman, mirage comics, mirage studios, neca, peter laird, shredder, teenage mutant ninja turtles | posted in Comics, toys

April 24, 2020

NECA Mirage Teenage Mutant Ninja Turtles

By Joe

These guys don’t need no stinkin’ “turtle power.”

A dozen years ago, toy company NECA dipped its toe into the world of Teenage Mutant Ninja Turtles for the first time, and shockingly it failed to stick around. That’s incredible to hear for collectors currently chasing down Bebop and Rocksteady at Target, but it’s the truth. There are a lot of folks at NECA who grew up with the TMNT and my guess is they wanted to do something with the brand right from the start, but always getting in the way was Playmates Toys. Playmates, as we’ve covered in various other places, held the master toy license for the brand and was reluctant to allow others into their space. NECA was able to by way of making adult collectibles based on the original Mirage Comics release, which was something Playmates had little interest in. NECA released its product in early 2008 to great reviews in the toy world, but apparently sales just weren’t there. It could be that the licensing cost just made it unworkable, or the license was only available for a short window that just couldn’t be properly taken advantage of. Whatever the reason, the line only included the four turtles plus April O’Neil as it was cancelled before it could get to Shredder, who was shown off at conventions and left to haunt the dreams of TMNT collectors every where.

Since 2008, these action figures have become highly sought after. Those who passed on them initially even had multiple chances to rectify that before NECA said “good bye” for good. The original release was each character in its own blister package with a bunch of accessories. Following that, there was a boxed set with all four turtles and a second single-figure release, this one coming in a tube style package (sewer pipe?) with just the figures and their weapons as the other extras were scrapped. Lastly, there was another four-pack release, this one a boxed set variant depicting the brothers in black and white.

Leo and Mikey.

Leo’s scabbards look so great with that line work.

I grew up on the cartoon, mostly, and it was my favorite show for many years. I also knew about the comic origins of the characters, but never really sought it out. I would see some images of the comic art, like the cover for the popular Nintendo game, and I’d think it looked awesome. I also saw some others though that I thought were terrible and ugly. The funny thing is, most of those images I didn’t like were just covers or one-off pieces of art and weren’t representative of what the characters actually looked like in print, but I wouldn’t realize that for many, many years. When I first saw these figures though I thought they looked incredible. I pre-ordered a full set and eagerly waited for their arrival. I may not have had much interaction with the comic, but I was at a point where things that reminded me of something I enjoyed as a kid, but were more adult, was really appealing. And hyper-violent, gritty, and grim TMNT certainly fit that bill.

Raph and Donnie

As you’re likely well aware, the four turtles consist of Leonardo, Michelangelo, Donatello, and Raphael. The four brother are depicted here as they would have appeared on the cover of Mirage Comics, and they are based on the first appearance of the characters in Teenage Mutant Ninja Turtles #1 by Kevin Eastman and Peter Laird. They’re green-skinned with brownish wraps and pads and all four sport a red mask. Each turtle comes with the weapons you would expect: twin katana for Leo, a bo staff for Donnie, two sai for Raph, and a pair of nunchaku for Mikey. For the first time I’m aware of, Mikey’s ‘chuks were also linked by actual chain. It was perhaps the one detail most influential in me picking up this line. I thought it was so cool that basically every friend I had who had a birthday party in 2008 and had even a passing interest in TMNT received one of these Michelangelo figures as a gift from me. The weapons are well-detailed, and I love the gold accents on Leo’s katana. Donatello’s bo is articulated at the tape and I think it can come apart like the one that comes with other versions of the figure, though mine doesn’t seem to want to do that and I’m not interested in forcing the issue.

I love the hilts on Leo’s swords.

For the first time, Mikey got real chains on his ‘chuks!

Since the turtles are all essentially the same, it should come as no surprise that each figure is essentially the same as well. That would be unfortunate if the sculpt was poor, but that’s not the case. These figures were sculpted by The Four Horsemen, whom action figure enthusiasts are more than familiar with in this day and age. Each turtle is articulated with a ball joint at the head, a hinge at the base of a very long neck (compared with the cartoon versions), ball-jointed shoulders and hips, bicep swivel, single-hinged elbow, wrist rotation and a hinge, thigh swivels, double-jointed knees, and an ankle hinge. At the time, this was probably the most articulation in any TMNT figure of one of the turtles, though over the years companies have found ways to sneak even more articulation into them, in particular with stuff under the shell. This level of articulation is fine though and I’ve never really desired more. NECA was smart to use a soft plastic for the chest which gives the legs greater range of motion than most would expect so you should be able to get some good posing going here.

Each turtle comes with an alternate set of hands featuring their climbing spikes as seen in the first issue.

These figures move well, but also look pretty damn fantastic too. NECA used a nice, deep, green for the skin-tone with a darker green for the shell. There appears to be a wash over the figures as well so there’s a slight gradient to the skin tone with some brighter spots that works really well to make these guys come alive. Since the comics were in black and white, it makes these figures pop even more (unless you’re used to seeing the colorized versions of the comics that came later). There’s some nice, black, linework all over the figures and I especially love the little marks on the shell and chest. It really gives these figures a comic-book feel. The elbow pads and wrist straps are part of the sculpt, while the belt and kneepads are glued in place. The belt and the tassels on the masks are a soft plastic with a lot of give, though my Don’s belt was glued a bit askew. The green paint of the skin has a nice texture to it that is slightly rough and feels appropriate for the characters. The only difference separating each figure is the head sculpt, with each character sporting a different expression. Leonardo also has scabbards for his swords on his back while the other turtles do not have holsters of any kind for their weapons. Raph has unique hands which feature a wider gap between his fingers likely to support holding his sai with the center blade between them (I’ve never been comfortable doing this though as there’s little give in the sai and I fear breaking it). The oversized feet of these designs makes them quite easy to stand and I love the chunky legs they possess. And they have tails! If there’s room for criticism, it’s that NECA could have randomized some of the little details on the chests and shell for each turtle, but it’s not a big deal. There’s also some paint chipping on my figures, but I honestly can’t remember what was present out of the box and what may have been acquired through multiple moves since I bought these. As these were my favorite figures through those various moves, I took great care when storing and moving them though.

That’s as far as I’m willing to push it with Raph’s sai. I’d be afraid of the plastic warping if I left it like that for an extended period of time.

I kind of like this “chucking” pose for Donnie and his bo. His headsculpt also might be my favorite of the four, it just feels very “Donatello” even if I’m mostly projecting the cartoon persona onto this one.

In terms of short-comings, there are few. I mentioned the paint chips and there’s some slight slop in spots, but nothing noticeable when these guys are on a shelf. The black lines on the mask of my Mikey figure are a bit light and not as pronounced as I would like them to be. He also has a blob of paint on the center of his shell. His hips are a bit loose, but he still stands well enough. The left hand of my Leo is super loose and has always been that way. It’s at least strong enough to hold his weapon, but move it at all and it will pop out. The only criticism I could levy at the sculpt concerns the shell, which sits a bit higher on their shoulders than it did in the comic. I only really notice it because it’s hollow and it looks a bit weird up close as you can see inside of it to the peg holding it on. It’s also a place dust loves to collect. Raph’s special hands also are a nice thought, but as I mentioned a few paragraphs ago the sai do not fit cleanly in them and I worry about them snapping. The added drawback is his wider fingers mean holding the said traditionally ends up quite loose. They won’t fall out, but you’ll want to position them after you place him somewhere and may have to fiddle a bit with his grip. Donnie’s bo staff also sits rather loose in his hands. If you want to do a one-handed pose he either needs the base resting on a surface or he has to hold it near an end where it’s a bit thicker, though if you play around you can get it to balance right (as seen in some of my pics).

How it all started…

Each single-packed figure came with extra accessories in addition to their weapons. All four turtles came with a second set of climbing hands from that first issue of the comic as well as a baby turtle. The hands come off and on easily, though in reality I can’t imagine anyone displaying these guys with those climbing hands. Each turtle also came with a base: two sidewalks and two streets between the four. These bases connect to form one mini diorama that was a really nice touch. The same line work that’s on the figures is in play here as well and it looks awesome. Raph also came with a lamp post for his base while Leo came with a fire hydrant. Donatello comes with a can of ooze or mutagen while Mikey comes with three mini buzz saws. Raph also came with three little blades and those, as well as the buzz saws, aren’t in any of my pictures because they’re floating around in some crates. These weapons do appear in TMNT #1, but they still feel like kind of pointless accessories, and like the climbing hands, aren’t something you’re like going to want to display your figures holding. It probably would have been more fun to have additional hands instead, but the standard gripping hands each turtle has is plenty good. These guys were tools of vengeance in the comic, they didn’t hang out in the sewer playing video games and scarfing pizza, so you’re going to display them with weapons in hand.

Mikey just hanging out.

Twelve years later, these four figures are still among the best TMNT action figures ever produced. I love the look, and going for that Mirage likeness was a great choice because it’s something that hadn’t been done before and has seldom been done since. Playmates did follow with their own version, but they’re nothing special and intended for more of a mass market appeal. There isn’t really anything I’d change about these guys even today. Could they have more articulation? Sure, but it’s also not like they’re starving for it. Plus I’d hate to disrupt the sculpt. Could they have more accessories? I guess, but there really wasn’t much else to take from in that first issue. And even so, they did deep cuts as-is with the additional weapons and climbing claws. Maybe fists for actual punches would have been neat, or open hands and finger-pointing hands for the sake of variety. If NECA were to re-release these though I don’t think they would need to do anything additional with them. If anything, a full Mirage-inspired street diorama would be pretty awesome.

My attempt at the group shot from page one of TMNT #1.

Unfortunately, a re-release is not in the cards at this time. When asked about the possibility, NECA has indicated that the Mirage stuff just doesn’t sell nearly as well as the cartoon and movie inspired toys, so while there is some demand, it’s apparently not enough to warrant looking at re-releasing them. It’s possible NECA is playing coy, but I’ll take them at their word for now. It seems TMNT is just plain hot at the moment, so I imagine there’s room for more Mirage product perhaps when NECA is done with the Turtles in Time figures. And thankfully, roughly 8 years after the release of these figures a Mirage Shredder was finally released as a New York Comic Con exclusive(the box for which is prominently displayed in my images) along with some Foot Soldiers. Perhaps I’ll take a look at that next. And if you’re hoping for more Mirage stuff, a Mirage variant of Shredder is coming via Loot Crate in a couple of months so maybe that’s a potential avenue for more from this line. Otherwise, if you want these figures you’ll have to turn to eBay and you’re not going to like the prices. Happy hunting!

7 Comments | tags: action figures, donatello, kevin eastman, leonardo, michelangelo, mirage comics, mirage studios, neca, peter laird, raphael, shredder, teenage mutant ninja turtles | posted in Comics, toys

March 11, 2020

NECA Turtles in Time Slash (TMNT)

By Joe

Ever since NECA forced the hand of Nickelodeon to grant them an expanded license for Teenage Mutant Ninja Turtles the toy company has been killing it with its releases. We don’t know if Nickelodeon found a loophole to exploit with the master license that has been held by Playmates since the mid 80s or if the company had to sign off on it. Either way, I like to think this is all a result of NECA just making a product that could not be ignored. And if everyone is making money, then everyone is probably happy.

With the expansion of the license it meant NECA could move from small batch, convention exclusives and market its product direct to consumers via more conventional means. NECA quickly secured distribution arrangements with Target and GameStop. Target would sell two-packs of figures based on the classic 87 cartoon while GameStop was handed single-packed figures based on the 1990 movie (a deal that is expiring soon and shifting to Wal-Mart). NECA would be the first to admit though that it wasn’t places like GameStop and Target that supported and grew the business when it got started. No, it was smaller, collector-oriented shops and online vendors that first carried NECA product and helped the company become what it is today. As a way of saying “Thanks,” to those businesses, NECA wanted to include them on this newfound TMNT craze and devoted a new line of product just for them: the Turtles in Time line.

Back in the late 80s and early 90s, the TMNT could be found in arcades and home consoles about as often as they were on broadcast television or movie theaters. Anyone who had a love for the Turtles and a game console probably had at least one video game based on the property. While they were of varying quality and some were more popular than others, it’s hard to argue that the one that has endured over the years as a particular favorite has been Teenage Mutant Ninja Turtles: Turtles in Time (alternatively known on the Super Nintendo as Teenage Mutant Ninja Turtles IV: Turtles in Time).

Check out that classic, old school, logo!

Turtles in Time was essentially the true sequel to Teenage Mutant Ninja Turtles, which was known as Teenage Mutant Ninja Turtles II: The Arcade Game on the Nintendo Entertainment System. Both games were fairly straight-forward beat-em-ups by Konami, a company known for creating such titles for the arcade. Players could play as one of the four turtles and bash their way through many a Foot Soldier in a quest to stop Shredder and save April. The games were simple and fun and also a great way to gobble quarters and turn a profit for anyone who plugged one into their establishment. Turtles in Time was the better of the two largely by way of arriving later. It looked better, featured more boss characters, and even gave the Turtles some additional moves to make use of. Surprisingly, it was made even better when it came to Super Nintendo as it looked largely the same while adding new levels and new bosses.

Slash in the comics vs Slash in the cartoon. One is definitely cooler than the other, though fret not fans of the dim cartoon Slash, he’ll be in stores soon.

One of those new bosses was Slash. Added to the end of the fifth level, Prehistoric Turtlesaurus, Slash attacked the Turtles with his twisted sword while rolling in a ball back and forth. He was depicted in his Mighty Mutanimals attire which is what the Playmates action figure was based on as well as opposed to the cartoon which had its own unique look. Slash was a favorite boss of mine when playing two-player mode (the only way to play the game, really) as two well-positioned players could just bash Slash back and forth between the two of them in a comical scene. Failure to do so actually left players with a formidable foe. I’d even go as far as to say Slash is the most difficult solo boss aside from Super Shredder due to his propensity to block most attacks.

NECA likely saw this version of Slash as a good opportunity to create a figure based on his comic look which could explain why Slash is part of the first wave of Turtles in Time figures which just hit shelves. Slash and all of the other figures in this inaugural wave (Leonardo, Donatello, and a purple Foot Soldier) comes in a box designed to mimic the original arcade cabinet, which is slightly amusing for Slash since he did not appear in the actual arcade game. These figures are largely just updated versions of the arcade figures NECA released as convention exclusives a few years ago. Slash is the only all new of the bunch, though even he is fairly familiar as he uses the same body as the other turtles. The main difference being he has spikes added to his shell and obviously has a new headsculpt. His belt is unique as well, as are the blades on his hands. He comes with his crooked sword as well, his weapon of choice in the game. And for added mayhem, he also has a grenade.

Our source material.

Like the other figures in this line, Slash has a pixel-like deco applied to his body. This is designed to mimic the video game appearance of the character right down to the resolution. When placed on a shelf, the effect mostly works. It’s not very extreme with Slash which is partly due to his darker skin tone when compared with the Turtles. For those two, I think the effect works a bit better though it actually works really well with the Foot Soldier, based on what I have seen anyways. I chose to only get Slash as I’m rapidly running out of room for all of my TMNT figures and the upcoming figures in the cartoon and film lines are going to do a number on my wallet as is. With Slash being unique to this line, I wanted to grab him. I loved my old Playmates version and I do confess this is what I think of when I hear the name Slash, as opposed to what the cartoon did with the character.

Since Slash has the same body as the other turtle characters, he has the same range of motion as well. None of the additions made to the sculpt impact that at all allowing for Slash to be a pretty expressive character. He has a nice weight to him, though his shell adds additional bulk making him a bit heavy in the rear. He can stand well enough, but it isn’t a bad idea to add an optional stand to the display for more dynamic posing and peace of mind. About the only thing he can’t do is mimic his pose from the game in which he’s doubled-over in pain. My figure was mostly free and easy out of the package, though his right elbow and knee required a bit of hot water to loosen. Even after that, the knee still doesn’t want to bend much so I backed off, not wanting to damage my new toy. He does seem a bit light on the accessory front, considering the other figures all come with giant surfboards, but really what else could he have? An alternate head depicting his pained expression would have been neat, I suppose. More realistically, additional bandana tails might have been fun like NECA does with the movie figures. Slash’s bandana just sticks straight out, but one that jutted out to the side would have been pretty cool. Again though, it’s hardly essential and realistically I would have just picked one and then forgot about the other.

The sculpt for Slash looks quite nice. Since he uses the same body as the Turtles he’s the same height. He appears a little more squat in the game, but that’s nit-picking. His shell looks great and reminds me a lot of the old Playmates toy, but with more extreme spikes. And unlike that old toy, his belt is glued on so you need not worry about it falling off. Slash has a maniacal grin on his face that suits the character. There’s a bit of glue or something stuck above the right cheek on mine, but it’s not very noticeable. Aside from that, the paint application is quite clean, save for the insides of his hands. His claws and toenails also aren’t painted, but that’s also accurate to the game. The blades on his hands are nice and long and look rather wicked. In comparing him closer with the game it’s hard to find fault.

Slash is a great addition to a fun line of TMNT product. I quite like this series and even though I’m mostly sitting it out, don’t confuse that with me disliking any of the figures here. It’s just an issue of resources as I’m really tempted to go all-in and create a separate video game display to go along with my movie and cartoon ones. Maybe an eventual sale will entice me, but if I’m being honest, these TMNT NECA figures are selling far too well to count on a future sale. If you like what you see and have the means, I say go for it. I see a lot of concern from collectors online about mixing video game figures in with their cartoon series, but to that I say “Who cares?” Slash looks great and fits in anywhere. The video game pixel deco is not particularly extreme and I have no qualms about placing him among the other villains from the cartoon.

As for the future of the line, we know wave 2 will comprise of Raph, Mikey, Leatherhead, and Shredder. They’re all basically repaints of existing figures (though in the case of Leatherhead, a soon to be released figure) from the cartoon line. Shredder appears to have some new tooling to give his spikes some added menace and he comes with new effects pieces. He’s in his normal form from the arcade game, but since NECA showed off a Super Shredder for its movie line recently at Toy Fair, don’t be surprised if a video game version follows. Additionally, NECA unveiled multi-colored Foot Soldiers as well which was a given. Other characters that cross-over with the other lines include Tokka, Rahzar, Metalhead, Krang, and Baxter. In the case of Baxter, his cartoon figure wouldn’t be in-scale with his much larger video game depiction so it’s unknown if NECA would do a different sculpt, or if they’d just use a larger mold based on the same figure. Bebop and Rocksteady also appeared in the home version of the game, but in pirate attire that basically would necessitate all new figures from what was already released. Either way, there’s room to grow and other games as well to pick from should they cross-over with the cartoon line so expect at least a few more waves. There’s also a TMNT branded Loot Crate coming this summer with an arcade theme so expect a figure in there as well. These figures can be found at specialty shops, and online at popular toy retail sites, and best of all, you can preorder them without too much hassle!

2 Comments | tags: action figures, neca, nickelodeon, slash, teenage mutant ninja turtles, turtles in time, video game toys | posted in toys, Video Games

February 12, 2020

Bucky O’Hare Wave 3.5 Aniverse Storm Toad Trooper

By Joe

It’s been a long time between releases by Bucky O’Hare license holder Boss Fight Studio. The last figure released by the company was 2018’s Storm Toad Trooper, a figure that arrived at my doorstep on Boxing Day 2018. Since that time, Boss Fight Studio has had sculpts and specs to show off, most notablyBruiser, but no releases. Somewhat quietly though, this variant of the Storm Toad arrived at my door this week. I had not and still have not seen any mention of his release by Boss Fight’s social media accounts and he’s actually still listed as a pre-order item on their webstore. I know the company had some delays it had to deal with in 2018 relating to the offshore factory it utilizes to make the figures (which is why the previously set for release in the Fall of 2018 Bruiser is now slated for a Spring 2020 release) and I assume those delays impacted this figure as well.

Some source material for this one.

Needless to say, it’s good to have some new Bucky product to talk about, even if it is a repaint of a previously released figure. If you’re going to re-release a figure though, it doesn’t hurt that it’s one of the best figures the company has put out. The Storm Toad Trooper is a marvel to look at. He looks like he was pulled right out of the comic from which he originated and there’s a ton of personality baked into this sculpt. Boss Fight smartly made sure he came with two heads and two pieces of headgear: a hat and the traditional trooper helmet, which encouraged fans to buy two as it offered two distinct display pieces. And of course, there’s always the temptation to buy even more and “army build” the ranks of the Toads. At $35 a piece, slightly less if you opt for a two-pack, it’s a bit tough to justify building out a huge army of Troopers, but the temptation is certainly there.

In order to help maximize the value Boss Fight gets from each figure, the company has produced at least one variant of each sculpt it has released so far. For the Trooper, that means an Aniverse version. The Aniverse is the setting for the cartoon Bucky O’Hare and the Toad Wars and it simply means “Animated Universe.” Though considering all of the denizens of Bucky’s world are anthropomorphic animals from our world, it also works as an “Animal Universe” as well. The first run of all of Boss Fight’s action figures thus far have been based on the licensing art supplied by Continuity Comics. In order to make the show easier to animate, some characters were changed when moving to animation, though for the most part the changes were minimal. Boss Fight even showed off an Aniverse Bucky variant that seems to have been quietly cancelled, possibly because he underwent very minimal changes when changing mediums.

The Aniverse variant of the Storm Toad is the first such variant that has been produced. It makes sense considering the Storm Toad did change a bit. His jumpsuit was altered from black to blue, probably to help him stand out against the many black, space, backdrops in the show. All of the gold on his uniform was also changed to yellow, probably because yellow is cheaper, and in some episodes his gun switched from hot pink to light blue. The green of his helmet and trim are also darkened a touch and there’s less detail on his skin. For the figure, this means no green patches on his hands and head. Lastly, the lens covers on his helmet also went from hot pink to red.

Two guns are better than one.

All of these little details have been captured by Boss Fight Studio with this version of the character. Beyond the change to the color scheme, the figure is essentially the same as released in 2018. For a brief rundown, this means he has a pair of trigger finger hands, two open palm hands, one pointing finger hand, a grinning head, a head with a sort-of side grin, helmet, hat, pistol, rifle, and hooked bayonet. A small piece of the rifle can be removed and swapped with the bayonet if you so desire. All of the weapons can be stored on the little peg holes on the figure’s belt or held. The figure itself is pretty loaded with articulation, though the details of the outfit hinder him a bit in ways the other characters in this series were not. It’s mainly those shoulder, elbow and knee pads which limit things a touch. He also has a very wide stance which doesn’t really lend itself well to dynamic posing, but it gets the job done.

Since this is basically a repaint, the figure has all of the pluses the previous one had. It also possesses the same negatives as well, of which there are few, but still worth a mention. His helmet is a real challenge to get onto the alternate head. You can try heating it up to make it more pliable, but that still might not get the job done. I could never get it to sit flush like it does on the stock head (which it snaps onto with satisfying ease) when it came to the original release, but this time I actually got it on! The second head doesn’t move as well though on the ball joint, but maybe I just pushed it in too far. The lens effect on the helmet is also achieved with a translucent plastic that runs throughout the entire inner part of the helmet and does leave red smudges on the head, something I never noticed with the first version. The alternate hat also doesn’t really snap in place, but it also doesn’t really need to as it looks fine even if it’s basically just floating on the head. The heads are a touch challenging to swap so be careful, but the hands are fairly simple. The included rifle looks great, but it is hard to get him into an appropriate rifle pose. If you can get him to hold it properly with his finger on the trigger you may be tempted to just leave it there as I did with the 2018 figure. I failed to do so this time around and a little stress crack was forming on the rifle handle so I backed off.

The Aniverse Storm Toad Trooper comes in Boss Fight’s collector friendly blister packaging. It’s a card-back with a plastic bubble that can be removed and reinserted with ease. Boss Fight even updated the artwork to reflect the new Toad with a some-what janky looking individual that’s reminiscent of the toon itself. It would have been neat if the little comic strip could have been updated to include scenes from the cartoon, but that probably would have meant cutting a check to Hasbro (who holds the rights to the cartoon) and I understand the decision to not do so there. Interestingly, the blister has changed slightly from past figures as the actual bubble is lower than before which necessitated moving the name plate up above the bubble and below the logo as opposed to on the bottom. If you’re curious, this figure is considered number 11 in the series. The bio card on the back is unchanged from the first release.

It’s hardly what I would call an army, but it’s a start.

Because I’ve just always liked the look of the character, the Storm Toad Trooper is still one of my favorites from this toy-line, a line in which it’s really hard to pick a true favorite as all have been exceptional. I also really like this color scheme and I think I prefer it to the original, though I’m glad I didn’t have to choose between the two. For the first release, I did opt for the two-pack, but this time around I only pre-ordered the one. Interestingly, when I ordered it I had elected the option to pick it up at Boss Fight’s brick and mortar location in Norwood, MA, but the company shipped it to me instead, so a sincere thanks to Boss Fight for the free shipping! I don’t know if it was shipped in error or if they have stopped taking orders for pickup. A quick look at their website seems to suggest that option is still available, so maybe it was simply a “Thanks for being patient with this line,” gift of sorts.

I can safely say though that this is my favorite variant so far produced by this line. Holiday Bucky was pretty clever, but I really like the idea of doing cartoon versions of the characters. I don’t think Bucky and Dead-Eye necessarily need Aniverse versions, but it would be neat to see Jenny get one if they decide to do another variant of her. The upcoming Bruiser and Mimi LaFloo could also easily be adapted for Aniverse paint applications as well. I would also love to see this particular sculpt re-used for a Frix and Frax. My dream would have been for Boss Fight to include a Frix and or Frax head with this release, but I understand the desire to not add more cost. They probably would also prefer to do a more proper release with the characters getting their own card art and so forth.

I hope to add several more figures to this display (pay no mind to the Christmas décor in the background, it has to go somewhere after the holidays).

Hopefully, the wait for the next figure in this line won’t be quite as long as it was for this figure. Bruiser is tentatively scheduled for the spring, and Boss Fight even sent a sample to Pixel Dan last year for him to review so he can’t be that far off. The company is also accepting pre-orders for Mimi and her approval process by Continuity went quickly so hopefully she’s on track for a 2020 release. And of course, Toy Fair is right around the corner now and we’ll have to see if Boss Fight and Bucky O’Hare will have a presence. Boss Fight showed off artwork for a line of mini figures last year and I would guess we’ll get more info about those soon. 2020 is already shaping up to be a good year for the funky fresh rabbit courtesy of Boss Fight Studio.

Leave a comment | tags: action figures, aniverse, boss fight studio, bucky o'hare, bucky o'hare and the toad wars, continuity comics, larry hama, michael golden, storm toad trooper | posted in bucky o'hare and the toad wars, Comics, Television, toys

January 29, 2020

The NECA TMNT Wish List

By Joe

shredder vs raph The early months of the calendar year are generally among my least favorite. They’re cold, dark, and dull where I reside. About the only good thing on the calendar is the annual New York Toy Fair in which vendors roll out previews of the toys to come for the next fiscal year and sometimes beyond. These last few years have been particularly exciting for fans of the Teenage Mutant Ninja Turtles as easing of the master toy license by Nickelodeon and Playmates has allowed other companies to enter the mix. The company that has most taken advantage of this new frontier is NECA which currently has three toy lines based on the property hitting shelves. It’s a crazy fun time to be a Turtle toy collector as a result as NECA has taken a nostalgic approach to its figures which is something Playmates rarely does. And this year figures (pun intended) to be an exciting one as lots of figures are set for reveal.

If you haven’t been involved with the lines up to now, here’s a refresher. NECA is currently hard at work packing Target with two-packs based on the 1987 cartoon. Figures released so far include all four turtles in both toon accurate colors and licensing material (i.e. bright green) colors, Shredder, Krang in his bubble walker, Bebop, Rocksteady, and the always serviceable Foot Soldier. Already unveiled and set for release this spring are figures of April O’Neil, Casey Jones, Leatherhead, Slash (in his cartoon outfit), and battle damaged Foot Soldiers. In addition to them, we’ve already seen previews for a Foot Alpha, Metalhead, Triceraton, Traag, Granitor, and Krang’s android body. That’s a lot to take in with much more likely in the can.

It’s a safe assumption we’ll soon be getting updated turtles to match their appearance in the famed sequel, as well as a few other choice figures.

At Gamestop, NECA is currently sending figures based on the 1990 film. They have thus far released the four turtles, Shredder, Foot, and Splinter. A special Loot Crate edition of Splinter is in production depicting him as a spirit from the camping sequence and with 2020 being the 30th anniversary of that film you know NECA has more on the way. We also know they intend to move onto The Secret of the Ooze so the movie line still has some legs.

At online and specialty shops, NECA is set to roll-out figures based on the popular arcade/SNES game Turtles in Time. The first of the four should be hitting retail soon and features Leonardo and Donatello complete with their weapons and surfboards from the Sewer Surfing level. There’s also a purple Foot Soldier who too packs a surfboard and Slash in his game-specific attire (which happens to match his comic look which the old Playmates toy was based on). All of the figures in this line feature a pixel-deco paintjob. Just revealed is wave two which includes Raph and Mikey as well as Shredder (the non Super version from the arcade) and Leatherhead. Considering a lot of the same players from the show were featured in that game, it stands to reason the cartoon and video game assortments will likely feature similar characters.

That’s a lot, and there’s already probably a lot more ready to be unveiled in a few weeks, but now feels like a good time to compile a wish list. I have collected all or parts of all three lines so far, but my main focus now is on the toon line. The 1990 film is my favorite anything related to TMNT, but there’s just not a lot left from that film NECA needs to touch. I have less fondness for the sequel, but wouldn’t mind some figures from it. The video game line is certainly cool, but not a huge priority right now. It may become one though if the Target two-packs continue to be extremely difficult to track down. Since the game figures are sold online and can even be pre-ordered, it makes acquiring them a lot easier. Plus they’re sold separately so there’s no danger of having to pay for a second, unwanted, figure in a two-pack (which so far hasn’t been an issue).

To sort of collect my thoughts in one place, I’ve decided to put together a little list of my most wanted from NECA. I suspect several of these will be unveiled at Toy Fair, but it would be a stretch to expect all of them. The cartoon actually featured far fewer characters than the old toyline, but many did make it into the show. NECA is thus far only doing characters that were in the cartoon, and if you’re nostalgia is just for the old Playmates line then maybe check out what Super7 is doing with its TMNT figures. Here is my list though, and I think number one is probably the same for many such lists:

Splinter (Cartoon) – We have the turtles, we have the main villains, and soon we’ll even have April and Casey, but what we don’t have yet is the beloved sensei to the turtles: Master Splinter. Playmates never did do a proper toon version of the character, but it can be assumed that NECA will and it will be spectacular. He’ll assuredly come with his walking stick, and hopefully some fun accessories like a mug of tea or maybe some sushi. Afterall, he never was all that fond of pizza.
There’s no way this guy smells pleasant.

The Rat King (Cartoon) – Possibly my favorite villain from the old show, speaking purely from a design standpoint. The turtles may have dwelled in the sewers, but the Rat King was really the only denizen that actually looked the part. If a cartoon character could have an odor, surely Rat King would have qualified. He would need to come with a few rats, though I’m blanking on additional accessories needed. It’s a long shot, but it would be rad if NECA could include a removable hat and duster to cover the redesign that came later in the toon’s life, but my guess is they’d rather hang onto that as a variant down the road.
I have an unexplainable fondness for this little guy.

Baxter Stockman/Baxter the Fly (Cartoon, Game) – I’m cheating a little by including both at number three, but my dream is for Baxter to come in a two-pack with his mutated fly persona. Toss in some mousers, and that’s quite a set! Baxter the Fly is also a figure I’m prepared to double-dip on should he get a video game release as well (and you know he will) because it will likely come with that outrageous gun he wields. And in case you’re not familiar with the game, I speak of the gun that could shoot fists and hand slaps.
Raph is probably about to make a joke about them being right behind him.

Pizza/Sewer Monster (Cartoon) – The Xenomorph inspired Pizza Monsters seem like a solid option for NECA’s Ultimate figures based on the cartoon. The Ultimates are for deluxe figures that will be sold individually as opposed to in two-packs. We don’t know where they’ll be sold, but we do know the Foot Alpha, Metalhead, and Krang’s android body are ticketed for such a release. The Pizza Monster makes for a nice fit because it could feature a fully grown version as well as smaller ones representing the larval forms and such. It’s a classic and well-remembered episode, so much so that NECA even did a Sewer Alien based on the film franchise Alien as a convention exclusive designed to mimic the TMNT version.
Groundchuck (right) was pretty cool. Dirt Bag (left) I could take or leave.

Groundchuck (Cartoon) – Groundchuck was one of my favorites of the Playmates toys. The bright red fur with blue attire and steel leg just looked cool to me at the time and I think it would look great as a NECA figure today. In the cartoon, he was paired with Dirt Bag whom I’m less enamored with, but it would certainly make sense to package the two together. He did not appear in Turtles in Time though so he might be a low priority figure since he doesn’t easily fit into that line (he did, however, appear in other games).
I know some people are still mad we got these two instead of Bebop and Rocksteady, but it’s hard to deny they’d make awesome figures.

Tokka and Rahzar (Film, Cartoon) – I’m not super into The Secret of the Ooze, but that doesn’t mean that I don’t think its featured dim-witted duo wouldn’t look great in plastic. Tokka especially would likely look awesome, while Rahzar would be a bit tricky given all of the fur. My guess is NECA would sculpt the fur in plastic as it did with Splinter, but who know? If they continued in their quarter-scale line maybe fur would be a feature there. Regardless, I think they would look awesome and I would also be interested in cartoon versions of the characters. It remains to be seen if NECA could create a sculpt that works for both mediums though as the cartoon versions basically looked like the Playmates figures. The two also appeared in the game so NECA could have possibly triple-dip here, though it might be safer for them to just make the film and cartoon/game versions separate.
Mondo Gecko was a character we were supposed to think is cool, and we all did.

Mondo Gecko (Cartoon)- Seemingly everyone’s favorite non-turtle character was Mondo Gecko. He had a skateboard, bright colors, and was named Mondo – what’s there not to like? He’s likely a high priority figure as a result for NECA and it would surprise me a little if we don’t see him in a couple weeks. NECA will likely try to make him screen accurate which is a bit unfortunate because the figure was so much cooler. I still think he’ll turn out fine though.
The heroes we truly need.

Rhino Man and Mighty Hog (Cartoon) – Yeah, I’m cheating again with another two character entry, but what are ya gonna do? I’m mostly avoiding variants of already released figures for this list, but I do love Bebop and Rocksteady and those figures NECA did are so damn awesome that I want to see more of them from the company. While the robots Super Bebop and Mighty Rocksteady are quite tempting, I think I’d actually prefer the super hero versions of the characters: Rhino Man and Mighty Hog. Even though this is the preferred variant for me, my guess is we actually get SNES versions of the two in pirate attire before anything else.
It helps that NECA won’t need to make a licensing deal with Kevin Nash thanks to the giant helmet.

Super Shredder (Film, Game) – Now you can’t have figures based on The Secret of the Ooze without including the big baddie from the end: Super Shredder. Given how quickly he was dispatched, Super Shredder was certainly more bark than bite, but man was he intense looking. NECA would have some fun sculpting all of those spikes. This bad boy would have to be big too, unlike the puny version Playmates gave us many years ago. And unlike Tokka and Rahzar, it wouldn’t be too difficult to turn that film-based figure into a video game one as he basically looked the same. He’d just need to have cool fireball effects and maybe a little screaming turtle.
Cooler than Batman. There, I said it.

Dark Turtle (Cartoon) – For my last entry, how about a deep cut? We’ll undoubtedly see figures of the Punk Frogs, Mukman, and maybe even Bug Man before we see a Dark Turtle, but he’s worth remembering. Dark Turtle, in case you forgot, was a one-episode appearance and is the alter-ego of Donatello. He basically looks like Batman, and what’s not to like about a turtle dressed as Batman? I’m not super interested in variants of the turtles, as I think I’m still fatigued by the many Playmates flooded the market with 30 years ago, but this one I’d go for.

2 Comments | tags: action figures, bebop and rocksteady, dark turtle, mondo gecko, neca, rahzar, rat king, super shredder, teenage mutant ninja turtles, the secret of the ooze, tokka, toy fair | posted in Film, Television, toys, Video Games

November 27, 2019

NECA TMNT Bebop and Rocksteady Target Exclusive Series

By Joe

I have been rather fortunate when it comes to toy collecting in recent years. When I was a kid, toy collecting meant going to Toys R Us or a similar store and seeing what was on the shelf. Catalogs, commercials, and card backs were my main source of information. I assume there were newsletters and other avenues for the older collectors, but for a kid that was basically it. Today though it’s way different. Kids who collected have turned into adults who collect and it’s become a large market that seems to keep on growing. As a result, there’s extensive coverage of new and upcoming toys at conventions and trade shows. The brick and mortar toy store is also basically dead in the US, and most people get their toys online. The “toy hunts” I used to go on as recently as the 2000s have mostly vanished for me, until recently that is.

When NECA was finally allowed to expand upon their Teenage Mutant Ninja Turtles offerings it meant I had a whole new line to dive into. The loosening of the master license by Playmates was still pretty restrictive though and it largely kept NECA to doing annual convention exclusives. That’s how I landed my set of 1987 Turtles two years ago in a gloriously massive set of 8 figures. This year though, NECA was finally allowed to seek distribution through conventional means that still kept the product somewhat separate from whatever Playmates was doing. This meant GameStop exclusive single-carded movie figures which had previously been a convention exclusive or restricted to quarter-scale. It also meant those toon Turtles were coming to retail and for that NECA partnered with Target.

Since Target also sells toys it meant there would be a conflict with Playmates. Even though Playmates is only producing Turtles based on the new cartoon Rise of the Teenage Mutant Ninja Turtles, there’s still a sensitivity there. As a result, NECA was forced to make sure their product is differentiated even more than it already was in the form of two-packs that retail for around $52 each and they had to stock the product in the back of the store, usually behind electronics. Their distribution method is a bit tricky too as the product gets shipped to Target, but is then stocked by a NECA employee. As a means of keeping track, NECA even launched what it called an Ambassador program, which is essentially a Street Team which musical acts and record labels often utilized back in the 80s and 90s, and these ambassadors basically make sure the area looks tidy and sends a picture to NECA on a weekly basis.

That dumb artwork is mandated by Nickelodeon, unfortunately.

I am a part of that program as I have a Target right in my town. I also work from home a few days a week so I have the flexibility to get there. When the Turtle sets started arriving though, I never saw one in my store. I would eventually see some months later at other stores when I thought to look, but they were definitely a bit hard to come by. No matter, as I already had them thanks to the convention set I had previously purchased. That all changed though with wave two. Back at Toy Fair, NECA unveiled the crown jewel of wave two: a two-pack featuring the dim-witted duo of Bebop and Rocksteady. Based on their cartoon appearance, this was basically the first screen accurate version of the characters ever. Back in 89, Playmates released the duo in their inaugural wave of figures, but they were hardly cartoon-accurate. Bebop mostly looked the part, but Rocksteady had a black tanktop for some reason and his seldom worn helmet was part of his sculpt. As a kid, this bothered me because I was a bit of a pedant when it came to toys, but I still loved them for what they were.

Since this pair was not part of a con exclusive set, it meant I was going to have to hunt for them. The second wave of these figures was set for release on November 26, but due to the unique distribution of the figures it meant some started showing up the week before. They even went up on target.com briefly the prior Friday, though Bebop and Rocksteady either never did or sold out in a flash. The other figures in the wave are all repaints and re-releases: a two-pack of Leo and Don, Raph and Mikey, and a two-pack of Foot Soldiers. The Turtles have been repainted in a bright green shade to more reflect the promotional art as opposed to the actual show, while the Foot Soldiers are basically army builders. All very cool, but I’m a bit limited by funds so I had to just focus on the new sculpts.

Because NECA basically stocks these figures themselves, Target employees are often unreliable. I found if I called a store the best they could tell me is if they were physically out or not. One employee was actually really helpful and knew that they were in the back, but they were waiting for the NECA rep to put them out. That was on the 22nd, and I made sure to check that Target the next morning. I got there about a half hour after opening and found the Turtles and Foot, but no Bebop and Rocksteady. Kicking myself for not being there right at opening, I proceeded to head to the next nearest Target where I found nothing. I would visit 8 other Targets that day driving over 100 miles in the process and found nothing at all of them. I kept an eye on Target’s website all weekend, and even asked my wife to check out our nearest Target on Monday while I was at work. Finally though, the day of this post, I found what I was looking for and at my store, no less.

What felt like a long and exhausting hunt was really only a few days and largely the result of my impatience. Had I just waited until the official release of yesterday, I would have saved myself a lot of time and money, but it’s all part of the experience. While it’s deflating to walk into store after store and find nothing, there’s also nothing like the rush of excitement when you finally do find what you’re looking for. I would and do trade that for the ease of an online preorder when possible, but it was nice to have that experience again.

All of the figures in NECA’s cartoon wave are packaged in window boxes with a color scheme that brings to mind the Turtle Van. NECA is unfortunately forced to use Nickelodeon’s licensing artwork on the packaging. This means the 2012 logo and character portraits of an unknown origin. The Turtles look fine in this loose style, but Bebop and Rocksteady look pretty terrible. Well, Rocksteady looks fine, I suppose, it’s mostly just Bebop that looks dumb. You don’t want to display these guys in box though, so I recommend just stashing that thing away.

So how are these guys? Well, in short, they’re a pair of beauts! Some might say these are faces only a mother could love, but they sure put a smile on mine. Bebop, largely by virtue of his glasses, has a bewildered expression on his face that I remember fondly. Meanwhile, Rocksteady has more of a disheveled look. There’s a craziness in his eyes that suggests he thinks he’s smarter than he really is, but anyone who watched the cartoon knows that’s not the case. His gut protrudes from under his yellow tank top and if you wish you can have his jaw hang open.

They’ve got the guns, but make no mistake, the Turtles always have the advantage.

Prying these bad boys loose was a bit of a challenge as they’re big and they’re bulky. Once I had them in hand though I was in love. Bebop is the slightly more impressive of the two just because of what his look involves. He stands about 7″ tall so he towers over the Turtles and is just a bit taller than Shredder. NECA used actual metal chain links for his wrist bracelet and belt which is really neat. The front clasp on the belt is glues to the figure so you don’t have to worry about it sliding off completely while the forearm has a little hook on it to keep the bracelet in place. Every part of his outfit is a separate piece of soft plastic as opposed to just sculpted on, including the bandolier strapped across his chest and under his red jacket. He has a necklace of teeth and those big turtle shells on his shoulders. His hair is even colored correctly with the mohawk on top in purple and his pony tail in brown. His glasses flip up as well to reveal eyes that are almost entirely black, likely to make sure he looks best with the glasses down. His mouth can open into a yell, though I definitely prefer him with the mouth closed. My figure has no paint defects I could find, and NECA used a shading to similar to what it did with the other figures so the back of his arms and head are in a slightly darker brown. The line work and the paint app just makes this guy “pop” no matter what is displayed around him. A true sight to behold.

Rocksteady may be slightly less impressive than Bebop, but he’s no slouch either. This version of Rocksteady is from season two of the show onwards, basically the version most are familiar with. In the first mini series, he sported a helmet at times and also had camo pants. This version has brown pants and no helmet. I know some fans were hoping for an included helmet, but it might have required a different headsculpt to facilitate and this headsculpt is perfect as is. Would I have liked one? Sure, but I don’t know if I would have displayed him with it. Everything else though is pretty much perfect right down to the single grenade on his chest strap and the lone turtle shell on his hip. I love that his belt is slightly askew and also that he’s just a hair shorter than Bebop at 6.5″. He also looks pretty great with his mouth open or closed, and like Bebop I couldn’t find an imperfection on mine. The only disappointing thing about him is that his knife isn’t removable from its sheath, and since it’s a bit loose, don’t try to pull it out. The linework is just as well done as Bebop’s and it really gives the impression that this is a guy with a rather soft physique.

“I’m surrounded by idiots!”

As these are big boys, one probably expected them to feature less articulation than the Turtles. And they probably do, but if so it’s not by much. A lot of the same joints are in place including ab crunches and ball joints at the hips and shoulders. There’s hinges in the wrists and cut biceps, double-jointed knees and elbows, waist articulation, and ankle pivots and hinges. The sculpt and added costume parts hide a lot of the articulation, but it does also hinder it. They may have a similar amount of points of articulation, but the functional articulation is certainly less. It’s a trade-off that makes sense though given these guys are brutes as opposed to nimble ninjas and the sculpts are really fantastic. The joints on mine were fairly tight when I opened them up. There’s a lot of paint here so that was expected. I was able to loosen things without the aid of hot water or a hair dryer, but just be gentle with your own set. Bebops legs are a touch loose and I do find him harder to stand than Rocksteady. That’s also partly due to his sweet high-tops limiting his range of motion at the ankle which is, again, a trade-off worth making. I can’t really get both feet on the ground and I might end up buying some NECA stands for these guys. Rocksteady is easier to stand, though his head is more forward. He’s limited in his poses as well, and again, a stand may be a wise investment as I’d hate for these guys to take a tumble and chip some paint.

“Uh oh, looks we’re surrounded.”

Accessory wise, these two come with everything you would expect them to come with. Out of the box both sport fists, but they each have a set of open hands and hands for holding their weapons. These extra hands are the same between the two, just colored differently. Both apparently shoot right-handed as their trigger finger grippers are right-handed parts. There are two rifles and two pistols for the two to share and they’re the same as what was included with Shredder and the Foot Soldiers. They also have a communicator to share between the two of them and affixed to it is an image of the NECA Shredder, which is quite cute and pairs well with Shredder’s communicator that has an image of Krang on it. Maybe a future release will feature these two on communicators, if one doesn’t already exist. Some might lament the absence of Bebop’s drill-gun, but like Rocksteady’s helmet, it was one of those things rarely featured. Usually they just had the nondescript laser weapons you see here. Removing the stock hands is just a matter of twisting and pulling gently. Beware with Bebop though as his left hand is largely responsible for keeping that chain bracelet on and it could go flying off if you’re not careful. I wish the pegs on the hands were a little thicker as they appear a bit fragile to me, but they’ve held up well thus far so my concerns may be for naught. The hands are also painted plastic, and sadly paint is prone to chipping. I had a hard time getting the trigger hand to fit into the handle on the pistol blaster and chipped Bebop’s fingers a bit. I decided from then on to play it safe and just use the more generic gripping hand on the pistols and reserve the trigger finger for the rifle. As an added little touch that may or may not be intentional, there’s a tiny peg on the communicator that can be fit onto Rocksteady’s belt. Pretty cool!

Rocksteady even has a place for that communicator.

Pairing these guys up with the other figures from NECA is a ton of fun. They look the part and they fit in scale-wise. In the show they might have been a little smaller, but that is largely due to inconsistencies within the show. They certainly look the part here and my bet is NECA was able to source the proportions from the style guide which hopefully dated back to 1987. These guys are in hot demand right now, but I encourage those of you on the hunt to remain patient. NECA knows it has a hit on its hands with these and I would expect they will make every effort to flood Targets around the country with them, and they’re also heading to the UK too. NECA even sent out an email to their ambassadors asking them to check with their local store to make sure these guys are either on the shelf or sold out, which is something they haven’t done for any other release. And if these guys don’t excite you enough, 2020 sure sounds like it’s going to be a blast! We’ve already seen finished, painted, prototypes for Slash, April, Casey, the Triceraton, Leatherhead, Roadkill Rodney, and Metalhead. Krang’s android body is also on the way and NECA hasn’t exactly been shy about confirming that Baxter Stockman should be expected at some point. And if video games are your thing, NECA’s latest in its TMNT video game series is expected to ship in February to specialty shops and includes renditions of Leo, Donnie, and the Foot Solider from the popular Turtles in Time game as well as a version of Slash from that game as well. 2020 is going to be a very exciting, and expensive, year for Turtle fans and we have NECA toys to thank for it. I can’t wait to see what the future holds, but I’m also not losing sight of the present as Bebop and Rocksteady rival anything the company has put out yet. Don’t sleep on these guys, Turtle fans!

5 Comments | tags: 1987 teenage mutant ninja turtles, action figures, bebop, fred wolf turtles, neca, rocksteady, target, teenage mutant ninja turtles, TMNT | posted in Television, toys

October 21, 2019

Take My Money, Hasbro, Give Me X-Men Animated Series Legends!

By Joe

Let’s talk some X-Men!

It’s been probably 13 or 14 years since I’ve purchased a Marvel-branded action figure. This is somewhat shocking to me because from the age of 7 to around 25 I spent who knows how much money on Marvel action figures. I was there for the inaugural Toy Biz line of Marvel Superheroes and X-Men action figures and I continued buying Toy Biz figures well past the age of when it was considered “appropriate” by my peers. And even after I stopped actually playing with my toys I still kept them on display in my room. Two pieces of old countertop on milk crates served as my makeshift shelves. Good guys on one side, bad guys on the other. As characters changed allegiance in the comics, so did their placement on my shelf. Aside from that, I didn’t like to mess with them and the dust would grow thicker and thicker and probably contributed to my constant sneezing. I didn’t care though, because I really loved my toys.

When action figures grew up with me I grew extremely excited. There were a few dedicated collector lines, most memorably one based on the Onslaught mini series, but things really changed with Marvel Legends. I was a bit tepid at first with them, mostly due to the absence of X-Men, but eventually I got into it. I started with just a figure here and there, and soon enough I found myself buying entire waves. I also added the occasional Diamond Select figure which at the time prioritized sculpt over articulation making some of the toys little more than glorified statues. I even got into Mini Mates for a period, since they initially focused on the Ultimate X-Men which was a comic I grew attached to pretty quickly.

Eventually, I stopped collecting. Part of that coincided with the dissolving of Toy Biz by Marvel which chose to instead license its properties to Hasbro. Those first few Hasbro waves weren’t very strong, and with the build-a-figure shrinking down to more normal proportions it failed to really motivate me. I think the last wave I bought to completion was whichever one featured The Blob. And even with that, I think I had to buy some figures based on X-Men: The Last Stand which did not sit well with me. That also happened to coincide with me moving out on my own trading the confines of my old bedroom for a small apartment. I didn’t want to have to lug a bunch of toys around with me every time I moved, and once I got settled into my own home that I purchased the itch had passed. I had moved onto other hobbies and comics just didn’t appeal to me like they once did. Sure, there have been a few figures over the years that tempted me, but the rising cost in standard toys makes it pretty easy to just focus on the things that really bring me joy.

That could change though, and if Hasbro wanted me back (and who wouldn’t?) there is one thing the company could do that would guarantee it many of my dollars and it has to do with my favorite show as a child: X-Men.

This recent action figure three-pack is what put my brain into this mode. These almost work as animated versions, but they’re different just enough to not be perfect. And I’m not just referring to Wolverine’s bone claws.

Nostalgia currently has me hooked via NECA’s line of Teenage Mutant Ninja Turtles toys based on the old cartoon series. That show may not be particularly good, but I loved it as a kid and it’s something I can’t let go of. Similarly, I have a huge amount of affection still for X-Men. That show was my life for a few years and unlike TMNT, the show is still watchable today even if it doesn’t hold up as well as Batman or possibly even Gargoyles. And I know I am not alone. There is a lot of love out there for that show and that has been preyed upon via action figures based on the costume designs of the Jim Lee era X-Men from the comics. There was a recently announced three-pack featuring Wolverine, Jean Grey, and Cyclops which is what really got my juices flowing. Those characters bare a strong resemblance to their animated counterparts, but the figures are also clearly aiming to capture the look of the comics and not a cartoon.

What gives me hope that such a line could work is because animated versions of these characters are not far off what is already out there. Take your standard Wolverine action figure, for instance. To make him better resemble the cartoon, Hasbro basically just needs to reduce detail. No stubble on his face, not much hair on the arms, and less muscle definition. DC has done a great job bringing Batman: The Animated Series to plastic form in terms of aesthetics, so why not do the same, Hasbro?

Because I’m such a generous guy, I’m even going to provide a road map for Hasbro. I envision six figures per wave with a build-a-figure bringing the total to seven. Adhering to modern times, the extra buildable figure is not some titanic character, but something closer to a standard sized figure. It would be a good fit for those figures that would need to be 7 or 8 inches as opposed to 5-6, which is what I imagine most figures would fall into. They could be done, and really should be, in scale with Marvel Legends and I would prioritize characters from the first two seasons. If the line’s a success, then sure go for more. If the series happened and worked out as outlined below, then I would definitely buy every figure and really annoy my wife as I hunted for more space to display them.

Series 1

Wolverine
Cyclops
Rogue
Morph
Mystique
Magneto
Build-a-Figure: Sabretooth

This mix would get some fan-favorite good guys out early and also a few villains to pose them against. Wolverine is an obvious must for the first series as he was the most popular character. He should come in his standard uniform and additional hands, some with claws in and some with claws out. A second, unmasked, head would complete the look. Cyclops should also just have his normal look. If a removable flight jacket could be added without harming the sculpt, then all the better, but not necessary. Similar to modern Cyclops figures, he should have a second head with a blast effect and probably an extra set of hands including one with two fingers extended on his right hand to activate his “X” communicator. Morph, on the other hand, should have his flight jacket since he was most often depicted wearing it. He should also have black hair as he did in seasons one and two and an alternate “evil” head. Mystique would need few additional accessories, making her the likely landing spot for a larger piece of the build-a-figure. Magneto would need a helmeted and un-helmeted head to properly capture his long hair. A nice, heavy, fabric cape would also look great, but soft plastic wouldn’t be bad either. Sabretooth, being featured in episode one, makes for a good choice as the first build-a-figure given his size relative to the other characters.

X-Men (FOX) [1992-1997]Shown from left: Wolverine, Morph, Beast

That’s how I want my Wolverine to look, bub.

Series 2

Gambit
Bishop
Storm
Cable
Pyro
Avalanche
BAF: The Blob

Wave Two would be anchored by the next most popular character after Wolverine, Gambit. He’d just need various hands and his bo staff to be authentic. Storm would be the other character from the team, and in the interest of “keeping them wanting,” would be the only other from the main team. Bishop and Cable both played large roles as guest characters and lend themselves well to action figure form. Cable should probably have his season two look which featured a metallic left arm, a more common look than the season one version. Bishop should also feature a removable time bracelet to go along with his really big gun. Pyro and Avalanche would serve as the villains with the BAF being their comrade Blob. A desire to assemble Mystique’s troop would hopefully help drive sales.

Everyone can relax, Gambit is in series two.

Series 3

Beast
Jean Grey
Archangel
Civilian Wolverine
Graydon Creed
Mr. Sinister
BAF: Apocalypse

Series 3 would be the one that nearly completes the main team. Beast, unlike most figures based on the character, should have a cheerful disposition as opposed to an angry one. Jean Grey would need her cartoon-accurate costume, something Toy Biz never delivered on when the show was popular, which was blue and orange as opposed to blue and yellow. She should also probably come with a Cerebro helmet. This would also be a good time for a second Wolverine figure. Since he was so often featured in plain clothes (yellow flannel with a brown jacket), a figure based on that look makes sense. He should have two pairs of clawless hands, ones that look like normal fists and ones that have the steel ports on his hands as he was incorrectly portrayed in season one. Diehard fans of the show, such as myself, really appreciate little details like that. Creed was a big player in season two, and he warrants a figure as a result. Of course, Sinister was the main big, bad, guy of that season and series three feels like a good spot for him. Lastly, Archangel should be included (with a masked head and unmasked head) to pair with the BAF Apocalypse who would be depicted in his animated purple and blue color scheme.

I don’t know why they made him purple, but the toy better follow in the same footsteps!

Series 4

Jubilee
Colossus
Omega Red
Forge
Civilian Cyclops
Professor X
BAF: Juggernaut

Series 4 would finish the main squad by including Jubilee and Professor X. Xavier would be the tough one to include as he would need his hover chair. Recently, Hasbro did a Professor X that I think retails for more than a standard Legend. The company could save money by retooling it and if it has to retail for more then so be it. Colossus guested a couple of times and is deserving of a figure himself. He should be clad in his blue pants and white tank top to match his appearance in the show. If a second, non-transformed, upper torso could be done then that would be really neat. Omega Red is a villain with a great, 90s, design, and even though he’s a bit bigger than other characters, I don’t think he’s so large that he would need to be a BAF. Cyclops had enough non-costumed appearances to be the second main cast member worthy of a civilian look. And Forge had multiple appearances as well. He should come with an alternate head so he could be depicted as main timeline Forge and future Forge. The Juggernaut is the last character that serves as an obvious choice for a BAF and would be a sought after one helping to make sure fans buy the entire wave. That only challenge with him is I think he would need two heads as well, one masked and one unmasked, because it’s hard to make a good-looking Juggernaut figure that features a removable helmet.

Colossus proved you didn’t need a real costume to be a hero.

Series 5 and 6

Phoenix
Gladiator
Nightcrawler
Dazzler
White Queen
Sebastian Shaw
Henry Gyrich
Bolivar Trask
Dark Phoenix
Banshee
Fabian Cortez
Empress Lilandra
BAF: Sentinel

I’m grouping these two together because I have a radical idea for the BAF. It would be a sentinel and the pieces spread between both waves. The piece loadout would be like Giant Man from the Toy Biz days which did an oversized wave of Marvel Legends as a Wal-Mart exclusive. This would allow Hasbro to do a bigger figure to do the sentinel justice, because we need a sentinel for such a series since they were so important in that first season. The desire to have a cartoon sentinel would help move some of the less exciting, but still essential, characters contained in this wave. Trask and Gyrich, specifically, would be unsexy figures, but they had such a large presence over the first season that it feels wrong to exclude them. Much of these waves would also be devoted to the Phoenix and Dark Phoenix Sagas. Doing both regular Phoenix and Dark Phoenix would also save Hasbro money since they’d basically be the same figure, different head. For Lilandra, I’d also go with the Empress version of the character as that would just make for a more striking visual. Cortez is the only character from a later season, but I see more opportunity for villains and I just happen to like him more than someone like Erik the Red or D’Ken.

I don’t see how you could have a toy-line dedicated to the X-Men cartoon and not feature a sentinel somehow.

If the line was a success, it wouldn’t have to end there. I completely ignored Sinister’s Nasty Boys and all of the mutates from the Savage Land. They would really help to bolster the ranks of the villains, but it might be hard to convince people they’re more deserving of plastic than some of the others. An entire Savage Land wave could even be done, though I don’t know if that would be a big seller. Another big bad guy I left out is Mojo who would probably work best as a BAF. If he was done, then he would need to be paired with a Longshot.

As for heroes, there are alternate versions of other characters that could pad things out. Civilian versions of Storm, Rogue, Jean and Jubilee (or her in a flight suit) could be added. Beast and Gambit had other looks as well, but nothing really drastic (though Beast with his Howard the Duck shirt is pretty tempting). Archangel also briefly appeared as Angel in season one and returned in season four sporting his white and blue Angel costume. Wolverine had other looks as well, though my personal favorite would probably be the alternate timeline Wolverine from “One Man’s Worth” which also featured a mohawked Storm. Other guest heroes included Iceman, Psylocke, Alpha Flight and X-Factor so there are certainly more characters to mine from, I’m just not sure any really need a dedicated figure based on their look in the cartoon.

Hasbro missed its chance to honor the cartoon with a line of figures to celebrate the show’s 25th anniversary. There’s still time though to recognize the 30th in 2022 and a toy-line near then would be an appropriate way to do so. If 2022 seems too far away right now it could be timed to end that year. The show is also about to gain new exposure via Disney+ where it and other X-Men cartoons will be available day one. And with Disney acquiring 20th Century Fox it stands to reason that the X-Men will soon join Disney’s Marvel Cinematic Universe bringing even more of a spotlight to the brand. The time is right, Hasbro, make it happen!

5 Comments | tags: action figures, apocalypse, cyclops, disney, fox kids, gambit, hasbro, magneto, marvel, morph, phoenix, superhero cartoons, toy biz, toys, wolverine, x-men, x-men 92 | posted in Comics, Television, toys

August 1, 2019

NECA San Diego Comic Con The Capture of Splinter Action Figure Set (TMNT)

By Joe

Over the years, various toy companies have given their take on the venerable Teenage Mutant Ninja Turtles. And no company has done that more often than Playmates, holders of the master toy license from back in the late 1980s when the property made the leap from print to world-wide phenomenon. I have no idea how many iterations of Leonardo or Raphael that company has made over the years, but it wouldn’t shock me if the number is over 100. For whatever reason though, when it came to the biggest foe the Turtles faced Playmates often came up short.

The Shredder was the villain in the debut comic and naturally he was chosen as the main villain for the cartoon series. As a result, he was one of the four villains in the debuting toy line. That Shredder left something to be desired. Few of those toys resembled the cartoon, but Shredder was particularly off. He had a blue helmet with a purple mask that appeared to reference a cloth material in the sculpt. He had his various spiked pads and a piece of purple cloth that served more like a gi than an a cape (most of my friends ditched the belt and opted to display him as a shirtless, caped, villain). Worst of all, he had this weird crouching pose that made him so hard to stand. It used to drive five-year-old me crazy that I couldn’t get him to stand or get him to properly wield a sword or something.

The toy was bad, but surely a better one would follow. Right? Eh, not really. There was a Super Shredder toy that became my favorite Shredder toy, though he was comically out of scale when compared with the other figures. He also wasn’t exactly like the Shredder I wanted. There was a wacky-action Shredder and a Toon Shredder, who was just a cartoon-accurate repaint of the original figure. Arguably, a good Playmates Shredder didn’t arrive until the 2003 cartoon series, long past the point at which I cared about the old cartoon.

When Playmates decided to make figures based on the film version of the Turtles, it oddly chose to essentially skip the first film. Maybe the company was unsure of how successful the pivot to live-action would be, but there were no movie tie-in toys for that film, which is really surprising in retrospect. The sequel came quick though just a year later and for that Playmates did make figures. Shredder looks pretty neat in the first film, and while he was changed for the second, it wasn’t a drastic change. Basically, he wore purple instead of red and the edges of his helmet were now serrated like a sawblade. Playmates opted against doing a figure though and instead just made a Super Shredder. Opportunity wasted.

I need more shelf space.

It took almost 30 years, but NECA has delivered where Playmates failed. Earlier this year, the company released a quarter-scale version of Shredder from the first movie. I want it, and it looks awesome, but I made the painful decision to take a pass. I was partly able to do so because I knew this set was on the way. For San Diego Comic Con, NECA delivered another set of action figures based on the 1990 film. Last year it was the Turtles, and this year it’s Shredder, Splinter, and a pair of Foot Ninja.

I’ve had really good luck with these NECA exclusives over the past couple of years, but I had to sweat this one out a bit. I landed my set on the last day of the presale, having failed the days prior. It arrived just at the end of July as it was shipped after San Diego Comic Con and I’m happy to finally have it in my possession. The box will probably strike people as being understated compared with the past two convention exclusives. Last year’s Turtles set came in a box resembling the original VHS of the film. This one settled for a simple black with the Foot bandana wrapping around it. The inner box has some photos of the set, as well as the actual figures in a window display. It’s a nice piece, it just happens to follow two spectacular looking ones between last year’s VHS box and the prior year’s Archie action figure collector case inspired look.

We’ll get to the big guy eventually, but lets not forget that before Shredder there was the Foot Ninja. NECA did a quarter-scale version of this character as well and released it early this year. Unlike Shredder, the Foot Ninja has a Playmates counterpart which was actually one of the better figures Playmates did during that era, save for the fact that he was made green for some reason. A quarter-scale version of this figure was a bold move, and hopefully one that has worked out financially for NECA as he’s what we would call an army-builder in the collector community. You can’t have just one, but at that size and price point few can justify acquiring more than one. In a seven inch scale though, the figure works just fine.

Just like the Turtles from last year, the Foot Ninja appears to be an almost exact scaled-down version of the larger figure. He looks great, and best of all there’s two! The texture of the costume is so realistic looking that I feel like I’m looking at a still from the film. There’s numerous weapons from the film and even a weapon rack to stack them on. Want to re-enact the nunchaku face-off with Mikey? You can. Maybe you just want to see them smash the floor of April’s apartment with those giant axes? Go for it. The only thing limiting you is your imagination. This figure is expected to get a single card release down the road at retail (Gamestop exclusive) and I imagine there will be lots of people interested in acquiring more and more Foot to pose with their heroes.

The Foot Ninja is dressed all in black and sculpted with a soft, plastic, material in many places. This helps make him have a really excellent range of motion even with those funny shaped shoulders and such on account of his costume. He’s all plastic, save for a strip of cloth around his waist just above his sculpted belt. At first, I didn’t understand why NECA would include that until I realized it functions as a great way to store weapons on him. And he has a lot of weapons. There are two nunchaku, one with a plastic strap similar to Mikey, and one with a chain linking the two handles. He’s also got a katana, a baton, and the aforementioned axe, plus a pair of sai and a bo staff for good measure. I do not recall any of the Foot wielding sai in the film, but I’m happy to have the extra weapons. The longer weapons can be stored on that included weapon rack, and the smaller ones in the fabric strip on the belt. He also has a pair of gripping hands and a pair of open palms. I have no complaints about this figure, but one obvious shortcoming is in the hand selections. The two Foot by default have punching hands which means they have to share the other two sets. Really, the default hands should have been gripping hands with the pair sharing the fists. If you want one of the ninja to hold a pair of sai, or nunchuks, or even the staff with two hands then that means the other one gets to hold nothing. They also share an extra knot for their bandana, but that doesn’t bother me.

Splinter is the lone all-new sculpt in this set. There is no accompanying quarter-scale version and as far as I know there is no planned one. 2020 will mark the film’s 30th anniversary and NECA will surely celebrate that in some fashion, so maybe a quarter-scale Splinter could be a part of that. Anyway, this is a depiction of Splinter from when he was captured by the Foot in the first film. He looks a little worse for ware, and even comes with shackles for you to hang him with. A separate to purchase diorama of that area he was held prisoner would have really made this set perfect, but beggar’s can’t be choosers. Splinter looks solid, with cloth accents used for his rags. He’s done-up all in plastic, in case you expected NECA to do something else with the fur. Because of that, he doesn’t look as picture-perfect as the other figures, but this is still a near spot-on likeness of the character. This battle-damaged version of the character is expected to remain exclusive to this set, so if you want your Splinter tenderized you’ll have to track one of these things down. Otherwise, a standard version is expected to be made available at some point in the future. Presumably his robe will be cleaner (though the guy lives in a sewer so it can’t be too clean) and maybe he’ll have a brighter paint deco. This one is fairly dark, and I do wish some red was added to his fur to warm him up a bit (since he was often under a harsh light in the film). Maybe he’ll also gain some swappable hands as this one just comes with shackles, which can be removed if you wish, but I’m a big baby so I haven’t tried.

As mentioned above, Splinter is light on accessories with the shackles being the main feature. They clip around his bicep area and are joined by a chain. He also has a crate to stand on that’s just a printed piece of cardstock. Plastic would have been better, but the figure appears to stand on it just fine without putting much force on it so I don’t think durability will be a major issue. His cloth robe looks great and even has a nice feel to it, almost grimy. There’s a fabric belt around it that’s really long. It kind of stands out too much and I’m tempted to remove it, though I probably won’t as I don’t really mess with the integrity of my toys. That robe hides a surprising amount of articulation as well, so if you want to remove the shackles and go nuts you can. My Splinter’s arms want to stay in that hanging position and I’m reluctant to force them, but I’m pretty sure they can be positioned more naturally (I might just need to remove the shackles). It’s a bit of a shame he can’t hold the nunchaku convincingly, but I’ll probably just display him in chains so it’s not really an issue for me. I don’t have a nice chain-link fence to hang him from, but that weapon rack seems to function as a decent stand-in.

Which brings us to the main event, Shredder himself. This is the figure I have wanted since I was a kid first seeing these characters I loved so much on the big screen. Even more so than the Foot Ninja, he looks like he was ripped from the screen. His magenta outfit has that slight sparkle to it and the helmet looks like it’s actually made out of metal. The faceguard pops off to reveal the scarred visage of Oroku Saki underneath and it’s a quite satisfying and fun accessory to play with. He comes with various extra hands and weapons, including his hidden dagger he tries to take out Splinter with. His weird, shiny, zebra-print, cape is also here and it’s a heavy cloth material that convincingly drapes over the character. It looks great and it really causes a dilemma as to how to pose him on a shelf since he rarely sported that look in the film. I’ve opted for the no-cape look for now, but I might change in my mind in a month or so when I get sick of looking at the current pose I have going on.

You fight well, in the old style, but you’ve caused me enough trouble. Now you face: The Shredder!

Never leave home without it.

The body of Shredder appears to be the same as the Foot Ninja. I suppose that’s a bad thing if you wanted your Shredder to be taller than his minions, but otherwise it’s fine as the body sculpt looks excellent. There’s a lot of softer sections of plastic making posing free and easy. His extra parts are also snug against his limbs, but can be manipulated if necessary. Mine needed some adjusting out of the box and at no point did I fear breaking anything. Like the Foot Ninja, he has a strip of fabric across his waist for storing a weapon or two, an obvious necessity for Shredder given the events of the film. He also has his long spear weapon to combat his foes with. He has additional hands as well including a pair of gripping hands and two open palm hands. The material his helmet is made of is soft plastic so getting the faceguard on and off is pretty simple. His face looks amazing and it’s almost a shame to keep it hidden under that faceguard, but he just looks so cool with it on!

Hang there, until you die!

That’s not to say that Shredder is perfect. He’s almost perfect, but there’s one shortcoming with him and it resides with that helmet. It looks awesome in promotional images, and the texture of it is also well-sculpted, but that soft plastic which makes it easy to slide the faceguard off and on can also bend. Most of the images I’ve seen from consumers all tend to have an issue where the left side (Shredder’s left) curls into the figure or bubbles out. I’ve tried messing with it a bit, and I don’t know if hot water or a hair dryer would help or hurt (the heat might make it curl more). It’s not something I feel like I need to contact NECA over, but it does bother me a bit. Since removing him from the packaging and messing around with him it has improved, so it may settle into the right position eventually. The only other nit I can think to pick with these figures is that the Foot and Shredder don’t have the necessary amount of movement in the shoulders to hold the axes over their head in a swinging motion. That’s minor though, and really the only solution would be additional joints in the front of the shoulders which would harm the aesthetics of the figure. Given the choice between the two, I think NECA got it right.

Maybe all that hardware’s for making coleslaw?

Overall, this is a really satisfying set that should please Turtle fans out there. If you happened to get one of these and you’re not satisfied with it, I’ll just add that NECA has some of the best customer support you’ll find. I haven’t had to do it, but I’ve encountered people who felt there was a problem with a part of their figure and NECA either replaced the part or the entire figure at no charge, often with no questions asks. It might take a few weeks, but they always deliver and stand by their product. The only real fault I can find with this set is the lack of extra gripping hands for the Foot Ninja, but if I’m really bothered by that I could always try and buy more Foot Ninja when they hit retail. Otherwise, the rest is just nitpicking here and there. At the end of the day, these are some really finely sculpted action figures and it’s hard to imagine anyone being able to top what NECA has done here.

The only other major shortcoming many people might add is that this sucker is a convention exclusive and thus, if you don’t have it, you can’t get it unless you’re willing to pay a scalper. The good news is that there’s a high likelihood of these figures all hitting Gamestop either by the end of the year or early next year. NECA all but confirmed that and if I had to guess the only exclusives with this particular set might be the weapon rack and shackles on Splinter and possibly some of the weapons the Foot get to play with. The single-carded Foot Ninja will likely have a full assortment of hands and the extra bandana knot and I’d be surprised if Shredder was changed at all. So if you missed out and you’re real upset about it, just be patient and keep your eyes open as these guys will sell fast once they’re made available. Earlier this year, Gamestop had issues fulfilling all of the pre-orders online for the Turtles so a pro-tip for you is if you have a local Gamestop preorder in store. Everyone I know that did so got their set and it was only the online orders that were cancelled. I don’t go into Gamestop too often, but every time I have I’ve taken a peek to see if they have the Turtles and I’ve never seen them so they’re still selling extremely well.

Now I will finish what I began with your ear!

As for the future of this line, expect more! Nothing is certain, but Randy Falk at NECA was quick to remind folks during his interview with Pixel Dan that next year marks the 30th anniversary of the first TMNT film. Expect something from the company to mark the occasion. As for what that could be, your guess is as good as mine. NECA also confirmed it will make figures based on the sequel, The Secret of the Ooze. Whether or not those include quarter scale versions is unknown, but I think it’s safe to say if you’re a fan of two prominent adversaries from that picture then you’ll probably be happy, eventually. And of course, NECA is continuing its line of TMNT with cartoon themed figures in two-packs at Target (Bebop and Rocksteady should be showing up this fall) and also video game themed figures at specialty shops. Expect Turtles in Time themed toys, including Slash, to start showing up at those places this fall. Right now may be the best time ever to be a TMNT fan, so start saving!

1 Comment | tags: action figures, neca, randy falk, san diego comic con, shredder, splinter, teenage mutant ninja turtles, teenage mutant ninja turtles 1990 movie, the foot, TMNT | posted in Film, toys

Recent Activity
Categories
Categories
Vital Signs
- 695,084 hits
Search
Email Subscription

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address:

Join 305 other subscribers

The Nostalgia Spot

Tag Archives: action figures

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Share this:

Recent Activity

Categories

Vital Signs

Search

Email Subscription