Tag Archives: bandai

September 26, 2024

S.H.Figuarts Dragon Ball Z Full Power Frieza

By Joe
He’s a hard guy to get rid of.

Frieza is the villain from Dragon Ball who just refuses to die. His initial battle with the heroes of Dragon Ball Z spans a whopping 30 episodes! Thank goodness that DBZ was a weekday show or else it would have taken more than half a year to see Frieza get taken down. And that’s just talking about the actual fighting, he’s a presence prior to that with the show teasing that this diminutive, effeminate, character is the most powerful being in the universe. And if the confrontation wasn’t long on just a straight episode count, it felt even longer because Frieza has a series of transformations to undergo before reaching full power. I guess since his underling, Zarbon, had a transformation of his own Frieza couldn’t stop at just one. No, he had four distinct forms to cycle through and the one he spent the most time in is his ultimate form – his fourth form. It’s become the most recognizable form of Frieza ever since, and since DBZ action figure collectors want every version of every character, Bandai has cycled through all four for its S.H.Figuarts line.

My Frieza collection could easily be twice the size of this, but I think I’m good for now.

That is, all except for the unofficial fifth form. I say unofficial, but it’s very much official as he does this in both the manga and anime, it’s just not a transformation on the same level as the other forms. Frieza’s full power form is basically his final form during his battle with Goku and it’s a bulked-up version of his fourth form. The whole fight, Frieza keeps teasing his foes that he’s not even using the full might of his awesome power so this bulky version is basically meant to signify that, yes, Frieza is finally going all out. I don’t think it’s ever been retconned to be a suboptimal form similar to the super bulked out Trunks we’d see in later episodes, though when Frieza returns in Dragon Ball Super he’s rarely depicted in such a fashion. And he definitely fares better against the might of the newly transformed Super Saiyan Goku while fighting this way so he doesn’t appear to be sacrificing any speed, though he does ultimately fall.

“Oh Frieza, you’re so swole!”

Naturally, since Bandai has covered Frieza’s first four forms (and his golden one from later) it made sense to just do this Full Power Frieza and consider the villain complete. The figure was sold via the Premium Bandai website in 2023 and has recently started showing up for those who ordered it. This is the extremely buffed out Frieza that I suppose some have always wanted. There’s a part of me that finds this look for Frieza a bit ridiculous. I think the villain works best when he looks somewhat less imposing than most, but packs a lethal punch. I felt the sculpt on display in the renders looked pretty damn spot on though and I tend to like chunkier action figures. It also will pair well with the Legendary Super Saiyan Goku (and even includes an accessory for that figure) release from 2022 and as one of the most iconic confrontations in Dragon Ball Z it felt like a worthwhile addition to the collection.

Frieza has a terrific sculpt, but more shading and paint detail on the battle damage would enhance this figure so much.

Frieza in his full power form comes in the usual box which features a nice window and a bunch of product shots. This one comes courtesy of the Vietnam factory, which has had some hiccups in the past, but appears to be on-par with the stuff we see coming out of China at this point. Frieza stands a shade under 5.25″ which makes him taller than the Fourth Form Frieza, but not as tall as Goku. As promised, he is very bulky. The neck is wider than the head, the shoulders are massive spheres, and the upper body especially is huge. It’s an over-the-top character design that Bandai and Tamashii Nations have done a great job at bringing to life. The purple areas are very glossy, as one would expect, and the white areas have a hint of a blue wash for a little depth. There’s veins and battle damage sculpted all into the body in various places. The articulation is numerous, as is typical of the line, but this figure does as good a job as most in hiding it as best it can. There aren’t any weird spots or massive gaps. The base of the neck is perhaps the one area that could be a little less gappy, but it’s not as bad as the recently released Vegeta.

“Stand back, Goku! I’ll take care of this monster with my Destructo Disc!”

Aside from the blue wash, paint is fairly minimal. The faces are all printed on exceptionally well and nothing appears misaligned or sloppy. There’s black in the ears as well as the finger and toenails. The purple spots appear to mostly be inserts of colored plastic except for the shins. The right shin on my figure is perfect, while the purple on the left is a bit sloppy around the edges. It’s the only real blemish I can find across all of the parts. His tail has also been chopped off at the end and there’s paint on the stub. I like that there’s a slight wash applied, but I do wish Bandai would try painting the sculpted-in battle damage. In the show and manga, those hatch marks are always black or black and red. By leaving them unpainted in the sculpt they’re almost invisible from the shelf and only apparent in-hand. Their sculptors do such a nice job that it’s a shame to see such detail almost go unnoticed.

“What?! He…he…has two?!”

In typical fashion, we do get a large assortment of optional parts with Frieza. For hands, we have a set of fists, clenching, open, flat palm, and open hands with peg holes in the palms. The peg holes are for two, pink, disc effects that have a nice buzzsaw edge and are done on translucent plastic. They plug into the hands, though the posts on them are not glued in so don’t be surprised if the peg stays in the hands when removing them. It’s not really a big deal since those hands only exist to work the effects so as long as one end stays inserted in another it’s fine with me.

The pegs for the disc effects may start in the discs, but they’ll probably come to live in the extra hands.

For portraits, Frieza comes with his standard cocky smile as the default one. The other expressions include a grimace where one eye is more narrow than the other, a teeth-gritting expression, and a yelling head. I’m surprised the grimace doesn’t feature one eye closed entirely as I think that’s where he ended up during the course of battle. He also has a portrait for Legendary Super Saiyan Goku that’s meant to simulate him getting punched in the face. I wish we had the same for Frieza. There are also two clenching feet that can be swapped with his flat feet. The feet can be tough to remove and I had to heat them in water. Without that, the whole ankle assembly was popping out. The hands swap easy enough while the heads can be a little tricky. The factory went with a standard double ball post and it’s a bit of a snug fit for most of the heads. This means that when removing them you may find the neck comes off the figure instead. I’ve been able to manage by making sure I pinch the neck when pulling a head off, but it can be a little frustrating. If you’re having trouble, heating the head with some hot water first would probably do the trick.

Probably the only comparison that matters.

Articulation for Frieza is largely what one would expect, it was just always a question of how effective it would be given the design of the character. I mentioned the double ball for the head and the ball joint at the base of the neck. His neck is so thick that the joint at the base of it will do most of the heavy lifting. The joint at the head is mostly for rotation and a little nuance while the neck will provide your up and down. The ball joint in the torso is going to further help with getting the character to look up while also adding a little crunch, rotation, and tilt. The purple plate in the middle of his torso will limit the crunch a bit, but it is on a hinge so it can move out of the way to some degree while the ball joint at the waist allows for further crunch forward and back. The shoulders are on butterfly joints which have some decent range coming forward, but very little going back. More room could have been cut-out to do so, but I guess someone didn’t want to break-up the sculpt. There’s some play on the shoulders to move up and down and the hinge will bring them out about 90 degrees. Bicep swivel is fine and the double-jointed elbows go a little past 90 degrees before the bulkiness prevents more range. Standard ball hinges at the wrist work fine.

If you like seeing Goku get punched in the face then you’ll like this extra accessory for Goku.

The hips feel like the normal ball-hinge setup. They can just about hit full splits going out to the side while kicking forward is no problem. At about the 90 degree point, the leg will want to go out from the body a bit because the crotch piece, but it will keep going higher. Because of Frieza’s narrow butt, the legs can kick back, but out to the side. There is a thigh swivel and I think the sculptor did a very good job of keeping it tapered as much as possible. Some more recent figures have looked a little goofy in that area. It will pop out from under the crotch piece when manipulating it, but you can slide the top edge of the thigh swivel under that for a more streamlined appearance. The double-jointed knee, like the elbow, will only go a little past 90 because of the bulk. The ball hinges at the ankle work okay, but the shape of the ankle and feet can make the more nuanced stuff a little harder. The tail, which does not come on the figure, connects via the standard hinged ball. It will rotate and has some play on the hinge. It’s mostly for adjustment posing, but it can also function as a third support, if need be.

“I have finally triumphed over you, monkey!”

Frieza is probably going to pose well enough without knocking anyone’s socks off. The butterfly could have been done better, but I don’t know that I disagree with the approach. The accessories are pretty solid as well and it’s always a plus to get energy effects. I do think we needed at least one pointing gesture since that’s such a common way for Frieza to attack. I don’t remember the flat palm gesture playing a role in the fight, but I haven’t watched it in over a year. I do lament the missed opportunity to not include a stump for his left arm and a similar thing for the base of his torso. Frieza got all cut up while fighting Goku and it would have been pretty amusing to be able to display him as he was at the end of that confrontation. He would have required some kind of stand as well, but honestly, every Frieza should have a stand. He, more than most characters from DBZ, is often hovering or flying as opposed to standing.

If ordered last year, Full Power Frieza would have set you back $85 plus shipping (which is usually $10). That’s not a cheap price for an action figure, especially one with so little paint. It’s not grossly out of whack with S.H.Figuarts releases, though he’s definitely not one of the better values. Is it worth it? I like it enough, and it helps that I spent that money roughly 9 months ago so it’s been gone for awhile. What will suck is the cost to acquire the figure now that the sale has been closed. I guess if you just somehow missed this and really need a Full Power Frieza to complete your collection then you’ll pay what you have to. For anyone else, it might be better to admire from afar because I’m guessing the secondary market is going to want somewhere in the neighborhood of $125. If you can get it down closer to $100, it might just be worth it. It’s a fine figure. I love the sculpt, I like the articulation, and there’s some good display options here. With a little more effort and creativity it could have been a truly special release, but as-is it’s probably good enough.

If you want some figures to pair with Frieza, here are a few:

S.H.Figuarts Dragon Ball Z – Mecha Frieza

When you have an action figure line as long in the tooth as the Bandai/Tamashii Nations Dragon Ball Z line from S.H.Figuarts, you tend to find some pretty obscure characters making the jump to plastic. Characters that may have existed for a blink and you miss it kind of moment, but when one’s collection already…

Keep reading
by Joe

S.H.Figuarts Dragon Ball Z Vegeta 24,000 Power Level

When a toy line is as long in the tooth as Bandai’s S.H.Figuarts Dragon Ball Z line, producers tend to start looking in all of the various crevices of the property for new material. We recently looked at a figure that did just that in Mecha Frieza, a version of the chief villain of the…

Keep reading
by Joe

Leave a comment   |  tags: , , , , , , , , , , , , | posted in Television, toys

July 8, 2024

S.H.Figuarts Dragon Ball Z Vegeta 24,000 Power Level

By Joe
Way over 9,000

When a toy line is as long in the tooth as Bandai’s S.H.Figuarts Dragon Ball Z line, producers tend to start looking in all of the various crevices of the property for new material. We recently looked at a figure that did just that in Mecha Frieza, a version of the chief villain of the series that appears briefly in the series and gets summarily dispatched with relative ease. Today’s figure appeared in more episodes of the show, but is still a fairly nuanced look at a popular character.

Assemble The Vegeta Squad!

Depending on who you ask, Vegeta is either the most popular character from Dragon Ball Z or just one of them. Everyone likes the bad boy and Vegeta fits the bill as he started off as a brutal antagonist of Goku before becoming more like a rival with a conscience. When Vegeta first showed up, he was a little guy with outrageous hair and big shoulder pads. He also sported a tail and what was basically a skirt of armor. Following his defeat by the Earthlings, Vegeta winds up on Planet Namek in search of the Dragon Balls so he can have his wish for eternal life granted. And when he showed up on that planet, he was basically in the same attire as he featured on Earth minus the tail and also minus the skirt. And that’s what we have here in Vegeta 24,000 Power Level, the latest delivery from Premium Bandai.

He’s a little guy.

First of all, before we get into the figure do we really think this Vegeta needed to be a Premium Bandai release? Vegeta is immensely popular and this version has never seen release before. The Scouter Vegeta is old at this point and it’s the most similar to this release. I think this should have been a general release. There’s enough new stuff here that I get why it wasn’t one of the $35 Target releases, but if the recent Super Saiyan Gohan (Cell Saga) can be a general release then surely this could have been as well. It being released as part of the web store means it was $65 and required a shipping charge of $10.

I’m not sure how I feel about the off-white armor, but at least the hands will match to past releases.

That out of the way, let’s talk about the figure. This Vegeta is mostly new and it takes some old problems and attempts to rectify them. In some ways, Bandai and Tamashii Nations are successful, but in others not so much. Let’s start with the good and it’s that this Vegeta is short. To the top of the exposed flesh of his famous widow’s peak, Vegeta is just a tick over 5″. To the tip of the hair he’s more like 6.25″, but either way it’s shorter than Goku and noticeably so and that’s the way I like my Vegeta. When he became a good guy he basically had height creep as the show and manga went on. He never got as tall as Goku, but he definitely got much closer. And since he is shorter in stature it means he’s mostly new parts. The engineering is the same, but the muscle definition when compared to the Super Saiyan Vegeta release is a touch softer which is a nice detail. It’s very true to the look of the series at this point as this is before the characters became more defined and Toriyama incorporated more straight lines into his art.

You may opt to use this hand with other Vegeta figures.

And speaking of, the thing that will likely stand out most are the included portraits. Bandai took care to make sure Vegeta’s facial features reflect the artwork of this era, something I don’t think the old Scouter Vegeta attempted. It’s ultimately a subtle thing, but likely anyone who has spent a lot of time with DBZ can spot a face from this era vs a later one. The lines around the eyes are rounded off and the chin is less angular. He has more pronounced cheeks and overall the faces look terrific. The rest of the body is true to the show with the broad chest, yellow shoulder pads, and all-white boots. As is often the case with this line, paint is minimal. The white portions are more off-white and it almost looks like there’s a wash, but I don’t see any difference between the exterior whites and the interior so I’m guessing there’s nothing here. The yellow paint for the armor looks fine and the faces look great, but more shading would have helped.

“How is his power level so high?!”

One thing that has plagued characters from this era of the show when making the move to plastic has been these damn shoulder pads. Bandai’s solution over the years has been to make them hinged which allows access to the full range of shoulder articulation, but the trade-off is the shoulder pads look bad when the arms aren’t in a neutral spot. For this figure, Bandai opted to ditch the center hinge and instead use a hinge and peg system located at the base of the rear of the shoulder pad. This allows the shoulder pad to rotate back in addition to hinge up. It’s better, I suppose, but still not ideal and the most annoying aspect of the figure is that the shoulder pads just won’t sit flush against the chest no matter what position the arms are in. It’s worse on the figure’s right side, but it drives me nuts. I don’t like the old hinges, but they at least didn’t have this problem. Really, we should have multiple shoulder pads that peg in so we have a neutral one and one for when the arms are raised. They did this with Jeice of the Ginyu Force, but I don’t know why they’ve never done it again.

“This time, Kakarot, I shall be the victor!”

The accessory loadout with this Vegeta isn’t great, but it’s not terrible either. We get four different portraits: neutral, smirk, teeth-showing, and really angry. The really angry expression is nicely stretched and looks really expressive. It’s very much of the era. For hands, we get fists, clenching, splayed open, and chop with the thumb in front, otherwise known as Big Bang Attack posed hands. Even though this era of the character didn’t feature that move, he still held his hand up in such a pose to fire energy blasts. And since the Super Saiyan Vegeta and Super Saiyan Blue Vegeta lacked this hand, it’s nice to get it here and the whites match well enough. We also get a scouter and a left ear for when he’s not wearing the scouter. It looks great, though going without means there will be a seem in front of the ear. It doesn’t really bother me, but I also plan to always go with the scouter anyway.

With the arms sitting high, you will need to rotate the shoulder pads back which also exposes gaps between the shoulders and body.

Lastly, we get a new crossed-arms piece. Previous figures have had this feature and it’s always been done as one piece that connects at the bicep swivel. With this figure, Bandai made the piece the entire arms so they plug into the shoulder, ball, joint. It’s a little harder to work with, and there’s a floating shoulder cap that might go flying when you first pull the arm out, but it does work. The left arm and right arm also separate where the blue sleeve meets the glove of the left arm. This makes it a lot easier to focus on getting the shoulders in place before moving onto adjustment. At first, I couldn’t get the arms to fit on the figure in a way that would allow the shoulder pads to sit in a neutral pose. Even the image on the back of the box couldn’t pull it off and the shoulder pads are up. After more fiddling, I did get it to work better. If you want the arms towards the bottom of the chest, it’s do-able. If you want them higher, you’ll have to rotate the shoulder pads back or up. Either way, while I don’t know if I’m sold on this piece attaching at the shoulder vs the bicep, I do like how it’s two pieces instead of one and it works well enough. Much better than the same for Raditz, anyway.

Pulled back for a more “shelf look,” which honestly doesn’t look terrible.

Articulation for this release is both familiar and yet not. Some of it is pretty good, and some not so good. We already talked about the shoulder pads so we’ll start at the head where Bandai is, once again, using a hinged ball peg. It’s not great, especially if you lose track of what direction the hinge is facing. It’s also tight, which means the much looser lower neck joint will do the heavy lifting when moving the head. The problem there is that the piece sits really high and gets very gappy. It’s ugly, and I can’t think of a figure in this line with a neck joint this unpleasant. The shoulders are on ball pegs with a hinge in the shoulder itself so you get a butterfly joint, but it doesn’t work that great. You basically pull the arm out first to bring it around the front, but the chest is so broad that it would need to move out much farther. Biceps swivel, double-jointed elbows, and wrist ball-hinges are all fine.

The torso features a joint in the diaphragm that feels like a single ball peg. It does very little. The upper torso will rotate and shift side to side, but it gets almost nothing forward and back. The waist joint is just a ball and socket that only swivels so you don’t get to leverage the joint for more forward and back. The legs kick forward and back nicely, but splits aren’t possible as the legs only go out to the side about 45 degrees. The thigh twist is fine and the double-jointed knees as well. The ankles are back to the old ball pegs which are very limited in all facets aside from rotation. There is a toe hinge, but it doesn’t have much range.

With the arms lower, the shoulder pads won’t need to be rotated back, but damn those persistent gaps!

For an S.H.Figuarts release, the articulation is pretty mediocre. We’re used to that when it comes to figures with this style of armor, but there’s no excuse for the lower half being as poor as it is. I’m surprised they didn’t go with a hinged peg in the diaphragm to get more crunch as his articulation there is worse than older figures in armor. This type of thing should be getting better, not worse.

When it comes to this edition of Vegeta, I’m a bit torn. Visually, it works for me as a representation of the character. The shoulder pads drive me nuts and the neck is pretty ugly, though I can at least pose around that to some degree. And the new crossed-arms piece works well enough. As for the rest, the articulation is lackluster and the paint is minimal. We get a nice array of faces and hands, but no effect part. He breaks one shoulder pad pretty quickly in the show so why not a swap-able piece for that? It also would have been nice if they made this figure convertible to a Saiyan Saga one with an included skirt and tail, but oh well. With a little more love, this could have been exceptional, but instead it’s merely passable.

We have plenty more Saiyans to look at:

S.H.Figuarts Nappa – Event Exclusive Color Edition

When it comes to my S.H.Figuarts collection, I’ve been able to largely keep to just Dragon Ball. And by Dragon Ball, I mean the original anime and manga that centered on a young boy named Goku. Even though that’s my favorite edition of the venerable series, it doesn’t mean my favorite is the one shared…

Keep reading
by Joe

S.H.Figuarts Dragon Ball Z Event Exclusive Raditz and Son Gohan

I’ve been getting a little taste of July of late in the dead of winter as not one, not two, but three action figure exclusives from San Diego Comic Con have arrived at my door. That’s because the nature of the exclusive has changed over the years. Why make a limited number of something and…

Keep reading
by Joe

Super Saiyan God Super Saiyan Vegeta – S.H.Figuarts 15th Anniversary Ver.

To celebrate the 15th anniversary of the Bandai/Tamashii Nations action figure line, S.H.Figuarts, Bandai turned to the fans. There was a large roster of releases eligible for re-release to mark the occasion, and anyone who wanted to could cast a vote for their five favorites. The winner was, not surprisingly, Vegeta. And in particular, it…

Keep reading
by Joe

Leave a comment   |  tags: , , , , , , , , , , | posted in Television, toys

June 27, 2024

S.H.Figuarts Dragon Ball Z – Mecha Frieza

By Joe
Talk about your makeovers.

When you have an action figure line as long in the tooth as the Bandai/Tamashii Nations Dragon Ball Z line from S.H.Figuarts, you tend to find some pretty obscure characters making the jump to plastic. Characters that may have existed for a blink and you miss it kind of moment, but when one’s collection already has most of the heavy hitters, the company needs to find ways to keep things fresh. That should be how we think of today’s figure, Mecha Frieza, a version of the villain that basically showed up for an episode and got murdered by Trunks, but since this is a variation on the long-running manga/anime’s chief villain, it doesn’t exactly feel like a deep cut.

I’m surprised that he didn’t view this as an opportunity to get taller.

Mecha Frieza is the end result of Frieza’s battle with Goku on the doomed planet Namek. After getting walloped by his own buzz saw-like attack, Frieza takes an energy blast from Goku right in the face and seems to be left for dead. Missing an arm, a chunk of his face, and all of his lower half, Frieza seemed like a goner, but apparently his race is able to survive even when blown apart. His father, King Cold (snicker), and the various minions at his disposal are able to fashion new, mechanical, parts to rebuild the villain and once completed he immediately sets course for Earth to exact revenge upon Goku. Only, Goku is no where to be found and instead he comes face to face with the Saiyan from the future – Trunks. From there, Frieza is dispatched effortlessly as he was just there to show how powerful a Super Saiyan really is. In other words, Mecha Frieza is a chump.

Frieza! Number one!

He’s a cool looking chump though! Mecha Frieza is a fun design as it takes the villain and covers him in odd junk. It’s a very Akira Toriyama-like design and seems rather out of place in this era of Dragon Ball. It’s a fun juxtaposition with the otherwise sleek and clean look of Frieza’s fourth form and the different textures and finishes just cry out to be captured in plastic. Years ago when Irwin Toys had the license to make Dragon Ball figures, Mecha Frieza was basically their crowning achievement. I should dig it out some day to see how it’s aged, but in my mind’s eye it was basically perfect from a sculpt presentation. Because of that, this version of Frieza has long been on my short list as a want when it comes to the S.H.Figuarts line. It just seemed like a character design that would display well. It would require more paint, more texture, than the average character in this line allowing it to occupy a prominent spot in any display. Last year, Bandai decided to make it happen and put Mecha Frieza up for preorder through the Premium Bandai website. Premium Bandai is essentially a made-to-order model for action figure production and since this figure is a bit more involved than most, it didn’t feel misplaced (where as, releasing any Vegeta through this model seems absurd, but whatever). I’ve had this figure for a little while now, but I finally have found the time to let you know how I think it turned out.

All of these new components did nothing for his bedside manner.

Mecha Frieza comes in the standard SHF packaging with product shots all around and a window on the front. The figure itself stands approximately 4.75″ to the highest point of its head. As expected, there’s a lot going on here and in some respects this may be the best work of Tamashii Nations. There’s a lot of white plastic for the remaining fleshy bits of Frieza with a slight blueish tone that looks rather nice. The black portions are mostly painted and they have this satin finish that looks really good in person and in photographs while the metallic bits are nice and shiny. The brown panels are painted cleanly as are the facial details. There’s some great sculpt work, especially in the robotic hand, and there’s a clever mix of parts that are either fitted together tightly or glued. It looks like the silver portion of the head and chest is separately molded and it’s a very involved sculpt that actually earns the “premium” designation.

These shoulder “caps” are unnecessary and feel like a case of over-engineering.

It’s not all perfect though. Bandai did do a couple of things with this figure that I don’t care for. One is the shoulders. I guess it’s for articulation purposes, but the outer shoulders are basically plastic caps connected via a hinge. It seems completely unnecessary to me and it’s not something done on the standard fourth form Frieza and I don’t think they’re doing this with the upcoming full power edition. It’s a harder, thinner, plastic too which looks cheap. The left shoulder which is painted black and brown looks fine, but the white shoulder with the purple cap does not look good as the white isn’t the same shade of white as the rest of the arm.

I’m also not a fan of the articulated tail. Just make it one, continuous, piece, please.

Another visual aspect I don’t care for is the tail. It’s well-sculpted and appropriately shiny, but Bandai decided it needed an articulation point in the middle that does next to nothing and looks bad. It’s also hard to attach to the figure and is cumbersome to deal with. Lastly, and the issue that bugs me the most, is the head on this figure is just too big. I’m guessing they enlarged it to better capture the detail, but he’s a real egghead. It’s really apparent when placing him beside the previous version of Frieza, and while I do think the head should be bigger than it is with that figure, not to this degree. They took it too far. And while the painted details they did add look great, there are still some slashes and such on the figure left unpainted which is a shame. I think a little color, or even just a wash, over those would have helped enhance this figure even further.

Flight stands aren’t a bad idea with this guy as the tail can make him difficult to stand.

Mecha Frieza comes with a fair amount of accessories. For hands, we get four sets: fists, open, clenching, and pointing. The figure also comes with four portraits: smiling, toothy smile, teeth-clenching, and yelling. The choice of expressions is done pretty well, but the quality control is a bit iffy. The heads are basically two sculpts fitted together where the white parts are out of one mold and the cybernetic parts out of another. On two of my heads, the parts aren’t seated properly. The angry, teeth-gritting head looks the worst as there’s a gap near the chin. The brown panel and the blue, transistor, things on the right side of the head are removable and intended to swap between the heads. I guess this was done to cut down on the paint hits?

This head isn’t quite assembled properly. It may seem like a small detail, but for the price point this shouldn’t happen.

The most attention-grabbing accessory though is definitely the sliced-in-half body. Mecha Frieza is best known for dying, so it makes sense that his figure should capture that. And since he got anime-sliced down the middle, it presented a real challenge for Bandai if they wanted to capture that in figure form. In order to do that, Bandai supplied a whole, separate, torso. It’s of Frieza with a horrified expression on his face. It’s basically cut in half, but glued together askew like his body is sliding apart. It is completely unarticulated, but there are no arms, legs, or tail. Instead, you’re supposed to disconnect the arms and legs from the main figure and affix them here. Same goes for the tail. There’s a circular, acrylic, base with a question mark-shaped post that plugs into it and then into the back of this bust. Because Frieza is hunched over, it’s a little more challenging to display than I’d like has he’s listing forward. It basically has to go as far back as the tail will allow to look its best. It’s also kind of annoying because it means you have to disconnect parts from the actual figure. Would it have cost that much more to just go all the way and put sculpted arms and legs onto this thing? It looks cool, but I don’t want to sacrifice the main figure to this thing.

“Hmm, it’s a bit grotesque, but what can I say? I do like it.”

Since this is an SHF release it’s obviously going to have quite a bit of articulation. Mecha Frieza does some good, and some not so good, when it comes to posing. The head is on the very annoying hinged ball peg. It means if you want to use the hinge you need to be mindful of which direction it’s facing since it rotates at the base. The neck is also on a ball peg and it has a habit of raising up a bit and creating a gap, but it can be reseated. I mentioned the hinged shoulder caps and they don’t do a whole lot, but if they pop off on you (one of mine arrived disconnected) they’ll be a bear to get back on. The biceps swivel is fine and the double-jointed elbows will go a bit past 90. I find the top joint in the elbow to be pretty tight and hard to work with. Hinged ball pegs at the wrist are fine.

“Looks like you will be the first of Goku’s friends to die, boy!”
“WHAT?! I thought I destroyed all of those monkeys and their offspring!”

The torso is a bit of another trouble spot because Frieza has this purple shield-like plate right in the middle of his body. It’s a separate piece of plastic that can pop off, but it will restrict Frieza from crunching forward much. Going back is okay, and there’s a ball peg at the waist that will add more range going in both directions, but it’s nothing crazy. The hips are the annoying drop-down style which have a tendency to be loose. Frieza’s are right at the edge of being too loose. He can’t do splits even with them, but at least he can kick fairly high. The thigh swivel works and looks pretty nice since it works with the sculpt. The double-jointed knees are fine and the ball-hinged ankles are okay. The ankle rocker is pretty steep. The tail articulation is pretty bad though. Hinged pegs at the rear and the midpoint function more like swivels. The midpoint joint is especially useless.

“No! I am still Frieza! The mightiest in all the known universe! I will not be felled by a blond-haired swordsman!”
“Gah!”

Mecha Frieza is an interesting release and in some ways a frustrating one. It’s not frustrating in the sense that it drives me nuts when in-hand like Super Saiyan Trunks, but frustrating in that it’s so close to being one of the best figures in the line. The sculpt and paint are terrific and well-executed. The oversized head is my main critique and I absolutely hate the tail. If the sliced accessory could display on its own without having to sacrifice the figure proper then it would be all the better. I think this figure was $85 plus shipping and at that price point it shouldn’t feel incomplete. Even with the imperfections, this is a figure I do think is worth having for your DBZ collection. Frieza is arguably the best villain the series has produced and he’s certainly become the most enduring and this form is perhaps the most interesting from a visual perspective. Sure, he showed up to die, but at least it was memorable. Certainly far more memorable than King Cold, and a great deal cheaper too.

“No…how could this…be..?!”

If you liked reading about this one then maybe you’ll enjoy one of these other Dragon Ball figure reviews:

Leave a comment   |  tags: , , , , , , , | posted in Television, toys

April 8, 2024

S.H.Figuarts Dragon Ball Super Son Goku Ultra Instinct – Toyotarou Edition

By Joe
Still Goku’s most powerful form.

It’s sort of interesting to me that the first Dragon Ball action figure I review after the passing of creator Akira Toriyama is one based off of the artwork of his protege – Toyotarou. Toyotarou basically lived the dream of fanfic artist and writer turned official. It’s rumored that he worked on the fan-fic manga Dragon Ball AF, though I don’t know if that’s ever been confirmed or refuted, and he was the artist and writer for Dragon Ball Heroes: Victory Mission. All of this work within the Dragon Ball universe must have put him on Toriyama’s radar for it was he who selected Toyotarou to be the artist for the Dragon Ball Super manga.

This figure comes in a much larger box than usual.

As a celebration of Toyotarou’s contributions to Dragon Ball and to also celebrate 15 years of S.H. Figuarts Dragon Ball releases, Bandai decided to release this special Toyotarou edition of the previously released Ultra Instinct Son Goku figure from Dragon Ball Super. The figure has been outfitted with new face plates to better reflect Toyotarou’s art style, which really isn’t all that different from Toriyama’s. The main feature seems to be narrower eyes which have a different sharpness about them. Toyotarou was also able to influence the expressions we have here and the figure received a slight re-deco to more reflect the colorization of the manga vs the anime. To cap it off, this release comes in an oversized box which also includes a book. Titled the Dragon Ball S.H.Figupedia, it catalogs all of the figures released in the line and also includes some short interviews and quotes from the people who are closest to the line. The only omission of note is Toriyama himself which is a bit of a shame. Maybe Dragon Ball action figures just weren’t his thing?

And the box is much larger than usual because it has this book all about the S.H.Figuarts line.

The figure itself is a reissue so it’s going to be pretty familiar to anyone who has the old figure. It’s also familiar to really anyone who has purchased a Goku from this line. For me, I never got the initial figure and there’s actually a lot more “new” here than I would have expected. He does share a lot of parts with one of the Goku figures I have and that’s the Super Saiyan Blue Kaio-Ken edition. Both figures feature the same legs and arms, though for this figure the hole for the sleeves in the shoulder has been removed. The belt piece is different since it needed to include the tattered remains of Goku’s blue undershirt and the torso is completely different since this Goku is bare-chested. Basically every Goku uses the same hands and feet while the heads are obviously completely different. I believe the main hair piece is the same as before too, though it may have been modified for these new faces as these key-into the sculpt in a unique manner from what I’ve been exposed to.

There’s certainly new stuff here, but from the waist down these two figures are the same
Ultra Instinct lends itself well to simple, calm, posing.

Goku stands at roughly 5.75″ to the top of where his head should be. The hair is a nice, pearl, silver and it’s an opaque piece of plastic, not translucent like some special edition figures we’ve seen. The ears on all of the faces are slightly larger as that is something Toyotarou feels is a part of his take on Goku and I honestly wouldn’t have noticed if he didn’t point it out in the included interview. The facial details are very sharp and crisp as this continues to be a real strength for the line. The torso and arms have sculpted battle damage, but no paint to bring them out. There is a slight wash to the torso and shoulders, a soft pink or orange which does give the figure a nice bit of warmth. It’s not on the rear of the torso which looks cold as a result. There appears to a hint of a dark wash to the pants which I mostly notice in the crotch and at the tips of the frayed parts. Otherwise, paint is mostly reserved for the wrist bands, boots, and some of the exposed flesh of the legs. The colors match well throughout and I am still quite fond of this torn gi sculpt. All in all, a nice looking version of Goku.

I’m really digging this eyes closed portrait.
They never stood a chance.

The different faces and hair help to bring this figure to life. Out of the box, Goku has the silver hair that most resembles the shape of his natural hair, but he also has a windswept version to swap to for action shots. Both look very nice and it will be hard to settle on a display for very long. His default face is a stoic one, but he also has a yelling portrait, side-eye, clenched teeth, and an eyes closed option. The eyes closed option is pretty damn cool and suits this form rather well, though it’s hard to turn-down how expressive the opened eyes are. I’m not normally into the side-eye options, but this one is like a glare. Whoever is getting the side-eye treatment from Goku is really pissing him off. For hands, the usual assortment is at play here: fists, martial arts posed, Kamehameha, and open. Nothing really special there and no effect part was included. That’s the only downgrade from the initial release which had a charging blast effect. It would have been nice to get one of those, though we have received quite a few of late. Really, a new aura would have been awesome as Ultra Instinct has this thick, almost syrupy, silver aura at times in the anime. It would have been fun to see Tamashii Nations attempt that.

The wind swept hair is a nice touch.
Maybe I should have grabbed Jiren after all so this Goku would have someone to battle?

The articulation for this Goku is virtually the same as the many other Goku figures we have received over the years save for the most recent Legendary Super Saiyan version which is on an all new body. I’ll link to some at the end of this entry if you want the full write-up, but suffice to say it all works just as well here, if not better. And it’s only better because there’s no shirt to have to deal with, but that was never a huge hindrance anyway. He actually can’t bring his arms across his chest any better than other figures and maybe a touch less. You just don’t have the sleeve flaps to fiddle with which is nice. I also can’t tell if there is a hinged peg setup in the diaphragm or if there’s just a little play on joint itself. It doesn’t lift as high as the other Goku figures, if so, but the clearance is fine and you get some forward and back articulation. It’s a well articulated Goku and the only things I dislike is the hinged ball peg at the head and the ball peg ankles.

Goku’s determined face.

The included book is basically the flagship accessory for this figure. Is that better than a blast effect? Yeah, kind of. Only because the book is unique and pretty well done. There isn’t anything truly revealing in it, no earth-shattering details about the development of the line or anything like that. It’s mostly just a celebration of the line and the product shots inside are all from the various solicitations we’ve seen in the past. I was hoping for a tease or maybe a reveal at the end of the book, but there’s nothing like that in it. It basically includes up to the Mecha Frieza figure, which is about to be released, and nothing beyond that. In terms of figures that have been revealed, it’s already out of date, but it probably would have been impossible for that to be avoided unless they had prototypes available for photography well in advance of the solicitations. Perhaps they could have done something to future-proof it a little via concept art or renders, but it probably wouldn’t have made much of a difference. It’s fun to flip through and the quality is pretty standard stuff. It’s 143 pages and in full color. There’s a dust cover on it, though it is a soft cover book. I like stuff like this so this was a selling point for me. Some people might not care and want more out of the figure for 80 bucks.

The book should be pretty fun for those who have been into this line for years.

The Ultra Instinct Son Goku – Toyotarou edition is a solid release for Bandai and Tamashii Nations. The figure captures the Toyotarou aesthetic rather well and I think it’s an improvement over the original release. It just stinks for those who missed out on that figure and wanted this one and had no interest in paying for the book. The figure doesn’t come with a whole lot and is basically like a 50 dollar release for the line meaning you’re paying about 30 bucks for the book and fancy packaging. When the first edition of this figure came out I wasn’t really sold on the Ultra Instinct design so I passed on it. I’ve warmed to it a bit since so I was happy about this new version as well as the included book. Yeah, I do wish there was an effect part or something else in the box, but I’m fairly content. I’m curious how many more Goku reissues on this body are to come. It feels like we’re on the verge of Bandai moving to a new body for the star of Dragon Ball and I’ll be curious to see if that does indeed happen. This figure was a Premium Bandai exclusive where the MSRP was $80. It’s sold out so if you want it you will have to track one down elsewhere. Maybe you’ll be able to get it for less if you don’t want the book? More likely, it will cost you more.

You like Goku? We’ve got Goku:

S.H.Figuarts Dragon Ball Z Super Saiyan 3 Son Goku

I believe I have touched on it before, and it’s also probably common knowledge among fans of Dragon Ball, that the story was supposed to end with Gohan’s triumph over Perfect Cell. Goku was dead and gone having sacrificed himself to save the world, but his son would carry on his legacy in his own…

Keep reading
by Joe

Leave a comment   |  tags: , , , , , , , , , , | posted in Comics, toys

March 29, 2024

S.H.Figuarts Dragon Ball Z Super Saiyan Son Goku – Legendary Super Saiyan

By Joe
At long last, the legendary Super Saiyan has shown itself!

I can remember a time in my life when I was just dying to see Goku, the hero of Dragon Ball Z, become that which was prophesized: a Super Saiyan! The seed for such a transformation wasn’t planted very early in the show and really only started being mentioned as the original version of the English dub was nearing its end, but it only took a cursory search of the internet to find out what a Super Saiyan was. Unfortunately, Dragon Ball Z wasn’t the hit FUNimation hoped it would be and that original direct-to-syndication order of a hacked-up 65 episodes was where it all ended for a long time. Only after interest was rekindled as we approached the new millennium did FUNimation go back to the localization process. Finally, on October 18th 1999, the legendary hero who was prophesized appeared on US airwaves (more than 8 years after doing so in Japan).

Goku’s initial Super Saiyan transformation was captured in plastic years ago by Bandai and Tamashii Nations. Dubbed “Awakening Super Saiyan,” it was one of the first releases in the S.H.Figuarts line to really catch my eye. I didn’t get it though, nor did I get the World Tour re-release of the figure which came out last year (or late 2022, I can’t remember). Unlike many of the convention exclusive releases in the line over the past few years, the World Tour edition of Super Saiyan Goku did not go up for preorder on the Premium Bandai website. It seemed an odd decision, but I think it was done because this particular figure we’re talking about today went up for preorder around the same time.

Not the proper Frieza to pair with this Goku, but give it time.

Super Saiyan Son Goku – Legendary Super Saiyan is a brand new release that features Goku from a bit later on in his fight against Frieza. The upper part of his gi has been obliterated at this point and his pants are in tatters. The more memorable aspect of this Goku though is just how damn big he got as that fight went on. He is positively jacked, similar to when he overdid it on the Kaio-ken against Vegeta, and his hair somehow seemed to get bigger too. I’ve always wondered if this is how series creator and artist Akira Toriyama envisioned the Super Saiyan transformation at first, then once he decided to make this something basically every Saiyan in the manga could do, decided to dial it back. With Goku as massive as he is against Frieza, there really wasn’t any other place to go with the Super Saiyan look when the characters needed to blow past that barrier. Vegeta in his ascended, buffed-out, state when he takes on Cell isn’t any bigger than Goku was against Frieza.

Look at that smug bastard.

Nonetheless, Goku looks pretty cool during the closing moments of his battle against Frieza and it’s high-time the look was captured in plastic. And since the base 2.0 Goku figure was feeling long in the tooth, it’s just plain nice to get a Goku that’s essentially all new parts. Even stuff like the hands and feet appear to be new tools. When Bandai revealed this figure in early 2023 it quickly rose to the top of my most anticipated figures for the year. I’ve had it for awhile now and since I’ve been buried under SHF releases ever since 2023 ended, I decided to let this one simmer. I didn’t want to review it when it was too new because maybe recency bias would play a large role in how I felt about it. It was even a bit of good fortune that I stumbled into that Super Saiyan 3 Goku because I got to go from this new figure, to an older Goku, and then back to this one. And after all of that I now feel pretty comfortable in declaring that this is one of my all-time favorite releases in the S.H.Figuarts line.

He even has optional bangs, more of a flying pose I think. They’re a bit gappy though especially around the sideburns.

Let’s start off with the details. Goku stands at around 5.35″ to the top of his face and roughly 6.75″ to the top of his hair. This puts the figure at about the same height as past Goku figures with the main difference being he seems to have a slightly shorter neck, but taller hair. It’s probably more accurate to say his neck isn’t any shorter, but that his traps are much bigger giving off the appearance that his head sits a tad lower. And bigger is definitely the name of the game with this Goku as every part of his body has been blown up for this release. Arms, chest, back, thighs – they’re all noticeably larger in size. Even his feet are bigger and there’s sculpted-in battle damage all over the figure. It’s in the form of lines, or cuts, but they’re only sculpted in. I’m surprised there’s no paint wash to bring them out as from a distance they’re hardly noticeable. Of course, if you collect this line then it’s not a big surprise as Bandai isn’t known for its paint apps. The paint on this figure is limited to light shading on the hair (my preferred approach to Super Saiyan hair) and shading on the pants which makes them brighten the further down the leg your eye travels. The boots have some yellow trim and red rope and the details of the face are painted. The paint all looks pretty good, the yellow on the boots could have been more saturated, but there’s not much to speak of.

He also has this alternate hair and bangs combo for when he’s really getting mad.

The sculpt is what is going to win people over with this figure. The hair is huge, but it’s appropriate for the character. The torso is rather messy to look at because of all of the articulation cut into it, but it’s not to such a degree that it’s an eyesore for me. Some may feel differently, but I like what I see. The belt is a floating piece and the tattered remains of the upper part of the uniform are part of the sculpt and it looks really nice. I love the gradient of the orange on the pants and how much it lightens near the bottom. It almost creates the illusion of a glow, an obvious necessity for a Super Saiyan Goku. And I mentioned it before, but it bares repeating, that this is my favorite approach to Super Saiyan hair. It’s molded in the same pale yellow we saw the Super Hero Gohan Super Saiyan head come in, but with some light air-brushing of orange on the front to give it depth. There are no metallic or translucent parts. My only complaint is that his sideburns aren’t part of the hair sculpt so you get an ugly seam with certain looks, but at least the standard bangs hide it.

He does look pretty nice with an aura behind him.

That’s not to say that everything is perfect with this version of Goku. You may have already noticed in my pictures that his chest is a different color than his arms and abs. Depending on your lighting, it’s going to be more obvious. I went with warm lighting waiting until the moment I had the maximum amount of sunlight I was going to have with a mix of white and incandescent light sources. It’s a bit more subtle, but if I had gone with pure white light it would have been even more noticeable. The issue is caused by the factory using a harder plastic for the chest, likely ABS vs the PVC we see elsewhere, which is a shame because I don’t think it needed to. It’s basically a hard overlay, so why not just use the same material as the arms, neck, etc.? My guess it’s a standard operating procedure to use harder plastic for this part of the figure, and no one bothered to try to something else. The other eyesore, for me, is that the pants are real busy around the crotch area. I like the torn parts, but they’re very poofy beneath that giving him a diaper look. Other figures of Goku taper in at the waist and the baggy pants don’t start to flow out from the leg until closer to the knee. This is largely caused by how Bandai has been doing its thigh twists recently and we saw the same with Trunks. I’d like them to stop as we’re not gaining better articulation with this setup, just poofy pants.

Here is where an actual blast would have been nice. Note how from a more head-on angle how the alternate hair also is hardly seamless along the hairline.

This figure also comes loaded with extra stuff. We’re used to getting a wide assortment of hands and 3 or four faceplates, but this Goku comes with even more. For hands, we get a set of fists, martial arts posed, open, clenching, Kamehameha pose, and Kamehameha posed with pegs. The hands all appear to be new sculpts. They have a sharper, more defined, appearance with more pronounced fingernails and bone structure which look really good. For expressions, we get four: smirk, stoic, clenched teeth, and yelling. In what is a unique turn of events, we get two hair options and two bangs options. The standard hair is how Goku looks throughout most of the fight with a collection of bangs hovering over his eyes. The secondary bangs piece has most of the bangs angled up except one piece. I could be wrong, but I think this is how he looked when flying or shooting off a blast. The secondary hair piece has all of his hair shooting up like he’s powering-up. It works great with the yelling face and any aura effects you may have, though the seams around his face are more pronounced with this option. The bangs do come off of this one as well, but they aren’t interchangeable with the others.

We now have a lot of charging Kamehameha effects, but few actual blasts. I only have the itty, bitty, one that came with kid Krillin.

Lastly, we get a charging Kamehameha effect. It’s pretty much the same effect part we’ve been getting a lot lately. For me, this is number four following Super Saiyan 4 Goku, Orange Piccolo, and the Super Saiyan 2 Gohan/Super Saiyan Ghost Goku set. This one is done in a very light, translucent, blue plastic with some white airbrushing on it. It has seven, acrylic, posts that clip in and it can be pegged onto either of the hands with the posts sculpted on. This version feels a little sturdier than some of the other ones I’ve received and plugging in the posts was a lot easier. It’s still a cool and appropriate effect, it’s just a little less special after the fourth one. I’m a little surprised we didn’t get an aura with this release, but recently Bandai unveiled a new aura effect that’s going to be sold with some other effect parts. There’s also a “getting punched” faceplate coming with the new Full Power Frieza so this is one of those releases that will get built out a little more in the future.

All of the extra stuff is wonderful to have, but I was really curious how this Goku would articulate. The older, 2.0 Goku has its issues that are getting harder to overlook as time goes on and this figure represents a chance to push the form forward. And in many ways it does, though it’s probably due less to new approaches to engineering than it is to the figure not having certain limitations to work around such as clothing. The head is on a double-ball peg and there’s a nice range of motion there. The hair isn’t as cumbersome as you may expect, and once combined with the ball joint at the base of the neck, you get all the range a Goku could want. The shoulders are ball-hinged and they peg into a ball and socket joint inside. This means you can raise the arms out to the side on just the hinge which will take the arm past 90 degrees, then use the ball peg inside the torso to raise the shoulders even higher. There is a butterfly joint which allows the figure to bring the arms inside the shoulders so the palms of the hands are practically touching, though it doesn’t let the arms go back very far. The biceps swivel, double-jointed elbows, and ball-hinged wrists all work as well as expected.

A gathering of Goku. Comparing the look of the torn pants on this release to the Kaio-ken version is like night and day.

The torso features a diaphragm joint. It may not be the prettiest in the world, but the joint at least works okay. It feels like a ball joint and it’s best at giving the figure a pivot point and some side-to-side motion. Going forward and back in a crunching motion is limited, but the ball joint at the waste at least helps there, but the ab crunch isn’t significant. At the hips, Bandai went with a soft, rubbery, overlay that goes over the crotch and above it. It’s almost too small to refer to it as a “diaper” because it doesn’t cover any of the thigh. This means it’s very flexible so Goku can kick forward past 90 degrees and also kick back and push on his butt cheeks for added range. Out to the side is no problem, though you may have to finagle the leg in such a way that the thigh slides under the overlay for full splits. The belt will sometimes pop off the sculpted indent on top of the pants, but it’s not too hard to get back into place if it’s even something that bothers you. The knot pegs into the belt and is able to rotate. There is a thigh swivel, though it’s more like a pivot as the range is probably in the neighborhood of 45 degrees. The knees will bend past 90 degrees, but not much beyond that due to the way the pants are sculpted. At the ankles, Bandai finally ditched the ball pegs it had been using for Goku figures and instead gave us nice ball hinges. They still attach via ball pegs so you can pop them out a bit to increase the range. They’re a bit more finicky when it comes to getting them in the best position for stances on your shelf, but much more rewarding than the old setup. The toe hinge is also still present and it’s fine.

This figure is just a couple tweaks away from perfection. The unfortunate thing is that such tweaks are not budget-related, just execution, illustrating how it could have been even better with just a little more effort.

I don’t know if there is anything on the older Goku figures that works better than it does here. I suppose kicking back, but that’s probably it. The articulation cuts in the torso are certainly cleaner on the past figures, but the added cuts here serve a purpose and it’s one they do well at achieving. I don’t think it’s on the level of an Amazing Yamaguchi release where the articulation is so plentiful that it’s ugly, but I can totally understand the person who doesn’t love the aesthetic of this one too. Best of all, the joints are nice and smooth. This is another release for Bandai’s Vietnam factory and it’s, by far, the best figure I’ve handled that has come out of there. The Super Saiyan Trunks – The Boy from the Future was plagued with quality control issues. Not the sort that ruined the figure, but the kind we’re not accustomed to seeing out of Bandai. This figure possesses none of those faults and if it wasn’t printed on the box I would have assumed that it came out of China.

After having this figure for about two months now I have to say I like it more now than I did when I first opened it. This is quite possibly my favorite figure in the line at this point. I’m not even sure which figure even comes close to topping it. Prior to getting this one, I hadn’t really given much thought to which release in this line was my favorite. I really like King Piccolo and I tend to enjoy the figures with more mass. Nappa may have been my favorite, though it’s definitely for the aesthetics and not the articulation as the shoulder pads on him are really cumbersome to work with. Super Saiyan 4 Goku and Vegeta were two that surprised me in how good they are, even if I find the look of that transformation to be so bad it’s good. This Goku however, hits it out of the park. It looks great, moves great, and comes with plenty of stuff. I mentioned an aura effect was almost expected, but I don’t mind its exclusion. If there had been a flight stand though that would have been awesome and really helped push it over the top. In the end, my only real gripes concern the fit of some of the hair pieces and the dis-colored chest piece which are both two things I can overlook. They basically bump it down from a 9.9 to a 9.5 if I were grading on a 10 point scale. If you collect Dragon Ball Z action figures, then this is definitely not the one to miss.

Akira Toriyama April 5, 1955 – March 1, 2024

Postscript: In between writing this and it going live we all received the stunning news that Dragon Ball creator Akira Toriyama had passed away at the age of 68. The entire manga/anime community mourns his loss and his impact can be felt across the globe. What a remarkable legacy. I have no doubt that the characters he created will live on in some capacity, but they’ll never be quite the same again. This must have been what it felt like when Walt Disney died. R.I.P.

I really enjoyed this release, but I also really liked these ones too:

S.H.Figuarts Dragon Ball GT Super Saiyan 4 Goku

In the world of Dragon Ball, there are varying opinions on which version of the anime is superior. Dragon Ball Z is unquestionably the most popular, but there are people (like me) out there who swear by the original Dragon Ball that came before it. More recently, Dragon Ball Super has entered the fray and…

Keep reading
by Joe

S.H. Figuarts Piccolo Daimaoh (King Piccolo)

Before there was the noble Piccolo, trainer of Gohan and ally of Goku, there was the evil King Piccolo. Known as Piccolo Daimaoh outside of the US, King Piccolo was the evil purged from the namekian Kame, who would assume the role of guardian of Earth in the world of Dragon Ball. Piccolo was the…

Keep reading
by Joe

S.H.Figuarts Nappa – Event Exclusive Color Edition

When it comes to my S.H.Figuarts collection, I’ve been able to largely keep to just Dragon Ball. And by Dragon Ball, I mean the original anime and manga that centered on a young boy named Goku. Even though that’s my favorite edition of the venerable series, it doesn’t mean my favorite is the one shared…

Keep reading
by Joe

Leave a comment   |  tags: , , , , , , , , , , , , , , | posted in Television, toys

February 26, 2024

S.H.Figuarts Dragon Ball Z Super Saiyan Son Goku & Super Saiyan 2 Son Gohan Exclusive Edition

By Joe
Time to do this father-son style.

We are now past Valentine’s Day and I’m ready to close the book on San Diego Comic Con 2023. The last action figure exclusive to look at is the two-pack of Super Saiyan Goku and Super Saiyan 2 Gohan. Dragon Ball Z has been around for a long time and has given birth to many iconic images whether it’s Goku and Vegeta squaring off or Goku’s initial transformation into a Super Saiyan or any others. One of the top ones is definitely Gohan finishing off Cell with what has been dubbed the Father-Son Kamehameha. Gohan, bloodied and with his left arm just hanging limp at his side, summons the strength to muscle-up one last blast with his father urging him on from beyond the grave. Goku appears as a spirit behind him as if he’s providing his own blast alongside his son. Whether it’s to be taken literally or not has never been really clear to me, but it’s a dramatic moment and definitely a fan favorite.

Did you think I was going to make you wait until the end?

For Comic Con 2023, Bandai released a two-pack that has shockingly never happened before. A battle damaged Super Saiyan 2 Gohan and a “ghost” Super Saiyan Goku so collectors can essentially reenact that moment as part of their collection. It comes in an oversized box with a black and purple deco and the photography on the box makes it obvious what moment this represents. The window only shows Gohan which almost makes Goku feel like it’s a surprise, or a glorified accessory. Both figures are re-releases of past ones. We’ve seen this base Goku body many times before across several iterations of the character. Gohan is also a re-release, though it’s an older figure and one I’ve never interacted with before. Initially, I was only going to get the event exclusive Raditz, but this release just looked too cool and it earned my $95.

I’ve suddenly found myself with many Gohans.

Let’s talk Gohan first since, as I mentioned earlier, Goku feels more like an accessory here even though he’s a full-fledged action figure. Gohan is, as the box states, in his Super Saiyan 2 form and his purple gi is all tattered and torn. There’s some battle damage painted onto his flesh in places, but no blood. He’s a young teen so he’s much smaller than his father and stands about 4.25″ to the top of his face. He follows some past event exclusives by featuring translucent, yellow, plastic for his hair which has been brushed over with a pearlescent, gold, paint. It’s a pretty heavy coat of paint so it’s actually hard to tell that there’s any translucency to the plastic, but it’s there and it looks pretty nice. I don’t know if I prefer it to painted, yellow, plastic, but it’s fine. The face printing looks sharp and is likely updated from the original release of the figure. Bandai did a good job matching colors the rest of the way, and it helps that the upper body is cast all in flesh-colored plastic. The only painted flesh are the exposed knees. The rest of the paint is fairly minimal. The gi is painted and there’s a darker purple for the inside portions of the torn parts. There’s a little shading around the knees, and then there’s the battle damage. It’s limited to the chest, face, and left arm and I’m surprised there aren’t any cross-hatches on his right arm, but it looks good and at least it isn’t overdone.

I also now have a pair of Super Saiyan 2 boys.
Gohan is a wee bit small for the aura effect.

For optional parts, Gohan has four portraits: stoic, teeth gritting, yelling, and an even bigger yell. The two yelling are certainly pretty similar, but it’s hard to argue anything is missing. For hands, Gohan has a set of fists, open, relaxed, Kamehameha, and Kamehameha hands with pegs on them. And if you get those blast effect hands with pegs, that usually means you get some kind of blast effect and that is true of Gohan. He comes with the charging, Kamehameha, effect. It’s done in translucent, light, blue plastic and consists of a small sphere with slots in it to accommodate seven, acrylic, posts. It’s an effect we’ve seen a few times and it seems like it’s becoming a favorite of Bandai as I think I have four of them now. This one seems lighter in color from the one that came with Orange Piccolo and doesn’t feature any shading. It felt a little softer too and the posts are more finicky, but it’s still a useful accessory.

“G-Gohan?! Is that really you?!”
This Gohan has proven really fun to mess around with. Too bad he’s going to just occupy one pose on my shelf.

When I ordered this set I didn’t really think much about Gohan as a figure because, like I’m guessing most people, he only needs to hit one pose and that’s it. To my surprise though, this is a wonderfully engineered little figure. I’m finding myself really charmed by it and if I didn’t want him on my shelf in his iconic pose he’d make for a great desk figure to fiddle with. His head is on a hinged ball peg, which isn’t my favorite setup as you need to keep track of which way that hinge is going to make use of it. I didn’t mention it in the aesthetics, but I love that the faceplates do not include the sideburns so the fit is seamless. The heads get some tilt, rotation is fine, and there’s a joint at the base of the neck that lets him look up and down, though if you want him to look as far up as he can it will create a gap at the base of the neck. The shoulders are hinged ball pegs and the range is terrific. Gohan’s arms go up past horizontal. The ball peg in the shoulder allows for the arms to come forward and across the chest pretty far. It’s not a true butterfly joint, but since the figure’s chest is so small the clearance is fine. There isn’t much in the way of a floating piece or cap to hide the joint which might turn off some, but it doesn’t bother me at all.

He’s coming for you, Cell!

In the arms, we get the usual biceps swivel and double-jointed elbows which go past 90 degrees. The hands are on hinged ball joints and they work fine. The diaphragm has what feels like a single ball joint that lets Gohan tilt a bit to each side. It only pivots rather than provides for rotation and there’s no forward and back. The waist has a ball joint which rotates and goes forward and back enough. The legs will kick forward past horizontal and kick back almost as far. They don’t go out to the side for full splits, but it’s better than 45 degrees. There is a thigh swivel in each leg and the knees will go a little past 90 degrees. The sculpted tatters interfere a bit. The ankles are the only articulation point I dislike. I think it’s just a ball peg, but Gohan has these sculpted boots that Bandai apparently didn’t want to break up so they’re one, solid, piece except for the toe hinge. They’ll go forward a bit on the ball joint, but not back very far. The ankle rocker is pretty poor, but the toe hinge is at least done well.

Technically not the first dead Goku figure in this line. Or even the second.

That’s Gohan, which means we’re only halfway through this one because we still have to talk about Goku. This Goku is essentially the Super Saiyan Full Power Goku, only now he’s sculpted in blue, translucent, plastic. There’s some darker blue paint for things like his boots and shirt and his face is printed on as well. Some parts of the body are more transparent than others as there’s some air-brushing over his pants. It’s a cool looking figure though and puts any Marvel Legends Iceman to shame. The only parts that aren’t translucent are joints like the knees and the inner part of the butterfly joints, but they don’t stand out in an ugly fashion. He looks great. It’s a figure I never felt like I needed and I still feel that way, but if you’re going to do it it’s hard to imagine it being done better than this.

The translucent effect is pretty neat, but you will want to hide the few non-translucent parts, like the elbow joint, if it can be helped.
This Goku may look different, but he’s still plenty familiar.

Like Gohan, this is a figure that basically only needs to do one thing, but Bandai still outfit him like a full figure. Goku comes with three portraits: stoic, yelling, and teeth-gritting. The printing looks pretty good considering it’s on translucent plastic. If anything the white of the eyes are too opaque, but it’s good that they stand out. For hands, he has the usual Goku assortment: fists, Kamehameha, open, martial arts posed, and a set of Instant Transmission hands. All of the extras are probably good for those who want to have a little fun with their toy photography, but he only needs those Kamehameha hands for me. Articulation is the same as all of the other Goku figures. It’s fine, with some areas showing their age, but he can do what he needs to. The joints are all nice and firm, but not overly tight.

Don’t worry guys, Goku will be watching over you. Always watching…

Like I said, this set just needs to be able to hit one pose and it does. It actually does it even better than I would have expected. This is a great release as an event exclusive. It’s a variant of two of the most popular characters in Dragon Ball Z and it’s centered on an iconic moment. It’s a wonder that Bandai hasn’t done more of this, but I wouldn’t be surprised if there’s more to come. There are plenty of other spots they could look to, and in a way they’ve already started by including certain extra parts and accessories with some figures. They orchestrated Vegeta defeating Android 19 by including a new portrait with 19 and the upcoming full power Frieza comes with a new face for Legendary Super Saiyan Goku. I’m curious to see how far they go with this and it’s a natural path considering they’ve released damn near every major character at this point. As for this release, it was an event exclusive that Premium Bandai put for preorder on its website. It’s been made and distributed, but they may unload extra stock on another retailer so keep your eyes opened if you missed out. I like it enough to recommend it even at a mark-up, but certainly don’t sleep on it because it’s only likely to go up.

We’ve got plenty more from the world of Dragon Ball to talk about:

S.H.Figuarts Dragon Ball Super: Super Hero Orange Piccolo

When Akira Toriyama set out to draft the plot for Dragon Ball Super: Super Hero his original goal for the film was to take a favorite character of his and give him an upgrade. That character was Piccolo who had basically been left behind by the likes of Goku and Vegeta way back at the…

Keep reading
by Joe

S.H.Figuarts Dragon Ball Super: Super Hero Son Gohan Beast

Last summer, fans of Dragon Ball were treated to a new movie: Dragon Ball Super: Super Hero. The intended purpose of the movie seemed to be to take two somewhat forgotten characters in Piccolo and Gohan and give them a makeover. The manga and anime Dragon Ball Super has basically been a story about Goku…

Keep reading
by Joe

Leave a comment   |  tags: , , , , , , , , , , | posted in Television, toys

February 21, 2024

Super Saiyan God Super Saiyan Vegeta – S.H.Figuarts 15th Anniversary Ver.

By Joe
Here come the Vegetas!

To celebrate the 15th anniversary of the Bandai/Tamashii Nations action figure line, S.H.Figuarts, Bandai turned to the fans. There was a large roster of releases eligible for re-release to mark the occasion, and anyone who wanted to could cast a vote for their five favorites. The winner was, not surprisingly, Vegeta. And in particular, it was the Super Saiyan God/Super Saiyan God Super Saiyan (yeah, I know) version of the character that had been released with the film Dragon Ball Super: Broly. That movie actually marked the first time we saw Vegeta use the Super Saiyan God form in animation (he used it in the manga) so it made sense to finally do a figure of that version. Rather than make it a dedicated Super Saiyan God figure, Bandai included a second head so he could also show off his Super Saiyan Blue look.

He has a snazzy slip cover and a disc stand. Those are the only additions.

When that movie and figure debuted, I was still feeling my way through this line. Did I need such a release? Yeah, I kind of did, but it took me awhile to figure that out. As a result, I never got it so this figure was indeed among the five I selected when I made my voice heard. It wasn’t my number one choice though (that would have been the Dragon Ball Super version of Future Trunks), but at least it was a choice. This was to be a special edition too, but all that meant is we were getting a fancy slipcover and a disc stand. For me, someone who never bought this figure before, it seemed worth it. Was it worth it for those who already had it? That’s a much harder question.

Assemble the blue-haired Saiyans!

Vegeta comes in the standard S.H.Figuarts box with the usual assortment of artwork. I don’t know if the photography is the same or not, but the name printed on the box does acknowledge the anniversary edition. There’s also a slipcover that goes over it with an image of the figure posed on the included “stand” with a timeline in the background and “2019” in a larger font since that was the year this one was originally released. The font and printing on the sides is surprisingly plain though. Like bootleg plain. If you’re an in-box collector you may be underwhelmed. If you’re not then you probably don’t care.

This figure will likely feel pretty familiar, whether you bought the first release or not.

The actual figure is basically the same Super Saiyan Vegeta figure that’s been released multiple times. This is my third version, personally. He has the same Cell Saga style of Saiyan armor only now it’s painted gray with a brighter yellow on the straps, abdomen, and lower back. The body suit is a very dark navy that’s almost black while the gloves and boots are more of an off-white. The only difference with this figure for me are the feet which feature a more rounded toe. I think they’re from the Resurrection F version of Vegeta? I’m not positive though.

I don’t have an all blue aura so this one will have to do.

It all means that this release of Vegeta has the same pros and cons as the other ones, only with more paint means more room for error. The paint on the abdomen, actually not a new spot to be painted, sucks. It doesn’t come all that close to the edges considering we’re dealing with a premium collectible here. At least the brightness of the yellow obscures that to a degree, but in-hand it’s pretty noticeable. The gray parts are okay and I like how it contrasts with the white piping. There is a scuff under my figure’s right arm and there are a few spots where it doesn’t properly fill the area.

The face printing on this release is not on par with the recently reissued Super Saiyan “Awakened Super Saiyan Blood” Vegeta. That one cost $35 at Target, this one cost $70 with a $10 shipping charge.
The Super Saiyan head looks pretty good on this body too.

The two portraits are the defining feature of this Vegeta. You basically get two hair pieces: one metallic magenta and the other a metallic blue. The sculpt is different from Super Saiyan Vegeta. It’s more narrow and less spiky, though still plenty spiky. I literally poked holes in the skin on my fingers swapping all of these heads as I moved them around the different bodies I have to figure out which combination I liked most since I intend to display all three versions. Nevertheless, I prefer the more full version of the Super Saiyan head’s hair, but this is fine. What’s not fine is the lack of options. Yeah, it’s great we get both the red and blue hair, but we only get one faceplate for Super Saiyan God (cocky smirk) while Super Saiyan Blue gets three expressions (stoic, teeth baring, and yelling). This is a re-release with 100% reuse sold at a fairly high price, why not just toss in more expressions? I feel like both looks need the cocky smirk, that’s just a Vegeta necessity, while the God head should at least have an angry look too. And perhaps more disappointing is that the face printing isn’t all that great. It’s not up to the new standards of the line and I don’t know if they’ve been improved at all since I don’t have the original release. Last year’s re-release of Super Saiyan Vegeta looks way better than the original release when it comes to the faces, it’s a shame the same can’t be said of the prestigious Premium Bandai 15th anniversary version.

For the God head you only get the one face. At least it’s the right one.
The stand is pretty lame, and hard to photograph since it’s so glossy.

Other than the heads, you get the usual assortment of Vegeta hands: fists, open, clenching, martial arts posed, and a lone right thumbs up hand. The crossed arms piece is also included and is just as annoying to fiddle with as it’s always been, but it does also look pretty good once you manage to get it into place. That’s it though as there are no effect parts or anything like that. You do get a special stand, but it doesn’t really earn that title of “special.” It’s just a black disc, the same that came with the event excusive stands a few years ago that featured Goku’s insignia as well as Whis and a Saiyan Space pod. Now it’s just all black with a 15th anniversary logo printed on it in metallic blue. It doesn’t say Vegeta or even Dragon Ball. It has slots that can be punched out for an action stand, but one wasn’t included.

This one is going to articulate just like the past iterations, which is pretty good.
I do think I prefer the red hair on the darker body.

The articulation for this guy is the same as the old one, so you can check the link down below if you want the full rundown. This figure is supposed to be a celebration of the line and it should have appeal to longtime collectors of the line because of that, but I don’t know if many would agree. Simply put, if you have the first release of this figure there’s really no reason to get this one. The extra stand sucks. It’s cheap and lazy. There are really no extra bells and whistles that I can see with the figure itself and the paint job is lackluster and not really reflective of the price point. If you’re like me and you wanted a version of Vegeta in these forms then it’s fine. It’s still a good figure despite the flaws, it’s just as a special release it seems phoned in. There’s nothing special about it.

“Yawn! You Saiyans bore me.”

Can’t get enough Vegeta? Here’s some things you may enjoy:

SH Figuarts Super Saiyan Vegeta

He’s the Prince of all Saiyans. The last survivor to have laid eyes on Planet Vegeta, home world of the mighty warriors and birthplace of the legendary Goku. And he’s also a pretty fine toy. Vegeta, arguably the most popular character to emerge from Dragon Ball Z, has seen his likeness cast in numerous forms…

Keep reading
by Joe

Dragon Ball Super: Broly

The first movie under the Dragon Ball Super umbrella is one that sets out to take what was previously non-canon and adapt it into the main series. The most recent two Dragon Ball Z films; Battle of Gods and Resurrection ‘F’, ended up being the start of Dragon Ball Super which is now well over…

Keep reading
by Joe

S.H.Figuarts Dragon Ball GT Super Saiyan 4 Vegeta

We’re back with another action figure review from everyone’s favorite version of Dragon Ball: Dragon Ball GT! And really, the only thing people remember from Dragon Ball GT is the Super Saiyan 4 transformation. Designed to bring the Saiyans back to their more primal roots, the Super Saiyan 4 transformation is pretty much on an…

Keep reading
by Joe

Leave a comment   |  tags: , , , , , , , , , | posted in Television, toys

February 19, 2024

S.H.Figuarts Dragon Ball Z Event Exclusive Raditz and Son Gohan

By Joe
The beloved nephew and uncle duo.

I’ve been getting a little taste of July of late in the dead of winter as not one, not two, but three action figure exclusives from San Diego Comic Con have arrived at my door. That’s because the nature of the exclusive has changed over the years. Why make a limited number of something and sell it at one location when it’s something a lot of people want? As a company, you’re just denying yourselves more sales and letting resellers reap the rewards. That is why Bandai has been making its event exclusives available to non-attendees when it comes to most conventions. The lone exception thus far as been last year’s World Tour version of Son Goku Awakening Super Saiyan, a re-release of Super Saiyan Goku from the moment where he first transformed. And I think the only reason why that one was kept exclusive to the events and store fronts it was sold at is because shortly after a similar, but new, version of Super Saiyan Goku was put up for preorder (we’ll be talking about that one in due time).

Vegeta: ”I’m surrounded by idiots.”

When I first got into Dragon Ball action figure collecting I intended to only get my favorite characters. This was back in the early 2000s when Irwin Toys had the license. One of their earliest figures was Raditz, and since he wasn’t a favorite of mine on par with the likes of Vegeta and Piccolo, I passed. Then as more figures came along I got caught up in the frenzy and just started buying everything and only passing on the figures I felt turned out exceptionally poor. I regretted not getting that Raditz in the end and for some reason I didn’t consider that when it came time for Bandai, via the Premium Bandai route, to do its own Raditz. I hemmed and hawed, but at the time I was (stop me if you’ve heard this) just getting my favorites. Fast forward a few years and my collection is bigger than I intended. While I have never gone full completist or anything, I do have my favorite arcs and such from the manga/anime and Raditz represents a hole. The same was true of Nappa and thankfully he got a re-release via the convention route. Now, it’s Raditz’s turn.

Raditz is a pretty big boy. Here he is between some Piccolos.

Raditz comes in the event exclusive packaging which is just the standard package, but with a two-tone approach. In this case, it’s orange on black. This version also comes with a buddy, or rather a foe, in nephew Gohan (more on him when we get to the accessories since that’s essentially what he is) though it isn’t a moment specific release since at that point in the fight Raditz had some battle damage. And since Premium Bandai is intended to be a one and done affair, Bandai couldn’t just re-release Raditz with some new accessories. No, he necessitated a new color scheme. In both the manga and anime, Raditz had black armor with dark brown shoulder pads. When Bandai made its first Nappa figure, it featured the same color scheme as that’s how he appeared in the manga and his first appearance in the anime. When the event version came around, it meant Nappa could have his anime colors from when the Saiyans land on Earth. Raditz, unfortunately, has no real other look so he’s recolored to have light brown shoulder pads. It’s not accurate to the show or manga, but beggars (i.e. me) can’t be choosers.

Raditz could really mess with some folks if he dyed his hair blond.

Raditz stands a tick over 6″ to the top of his portrait and considerably taller when you factor in that giant mass of hair he’s got going on. He has his scouter, which features a blue lens now, and the muted brown shoulder pads and other plating over dark navy, almost black, armor. The scouter is removable, but only so you can swap the faces. There’s no replacement ear if you want to go without the Scouter look since Raditz never took it off. The hair is pretty damn huge, as expected, but done in a more simpler manner when compared with Super Saiyan 3 Goku. It’s thinner and lighter so it isn’t the impediment to standing that it is with Goku, which I guess is why we don’t get a flight stand for Raditz. In addition to the color change on the armor, the bands Raditz wears on his left arm and left thigh are now silver instead of red. It does pair well with the white piping of the armor, though I wish they had just left it red. One advantage this release has over the original is that the faces are using the new printing process recent DBZ figures have featured so they look very nice. My lone complaint is that they didn’t do the portraits in the same manner as they’re done for Vegeta with much of the front hair part of the face. This means there is an unsightly gap between the hair and sideburns. It’s a small thing, but we are talking about an $85 figure.

I think this cocky expression is going to wind up being my preferred look.

As is customary with S.H.Figuarts releases, there isn’t a ton of paint on Raditz. There’s basically no shading and the paint is reserved for the trim work on the armor and the bands on his arm and leg. What’s there is pretty clean. His skin tone is on the pale side, but I think that is to differentiate it once more from the first run of the figure. It looks good, but it’s also a bit of a shame for those with the old one since I think these faces are a slight improvement, but probably would look off when placed on the old figure. The joints are colored pretty well and don’t feature any extreme differences from the softer parts, a problem we’ll be talking about on another SHF release in the not too distance future.

This face, on the other hand, is definitely the worst.

For accessories, Raditz gets a solid complement of faces. We have a stoic/grumpy face, a smirk where he’s giving a side eye, a yelling face for when he’s angry, and a perplexed/surprised face for when he spies an unexpected power level on his scouter. Unfortunately, my stoic face is not aligned properly and his eyes (in particular, his left eye) is printed partially over his eyebrow which makes his pupil all but disappear. I reached out to Bandai about a potential replacement, but they send the error essentially wasn’t “bad enough” to warrant any action on their part. I guess they don’t take the “Premium” part of their store too seriously. For hands, he’s got a set of fists, open, and clenching. His left hand was a bear to swap as the joint kept coming apart at the forearm, not the wrist, so I had to hit just the fist to get it off. The other hands are also tough to get one snug and may need some heating up.

I like the idea behind the crossed-arms piece, but it just doesn’t work with this figure.

We get two versions of his tail. There’s the “belted” version that goes around his waist and an extended version. The extended version has a bend to it and I suspect that’s so Goku can grab it, provided you have a Goku with gripping hands (I don’t think I do). He also has a crossed-arms piece like many a cocky fighter before him. The arms can disconnect at the bicep and the crossed arms piece can be inserted. It’s a piece that’s never fun to put on, and with Raditz the shoulder pads and his incredibly spiky hair cause some issues. I mentioned that Raditz is easier to stand than Super Saiyan 3 Goku, but he’s still not as easy to stand as other figures in the line. For that reason, he actually has a panel on his back that can pop off and there’s a replacement part that features a port for a stand. We saw something similar with Piccolo, though Raditz required the adapter so it can get around the hair. You basically take any stand, remove the claw, and it can slot into that for easy posing.

This is easily the most paint I’ve ever seen on a SHF figure.

The big accessory Raditz comes with is, of course, his nephew Gohan. Gohan is a mostly static figure and it’s depicting him when he emerges from the Saiyan pod to confront his dear uncle. Unlike Raditz, this little guy is fully painted because he’s basically a slug figure. The paint is done quite well as the emblem on his shirt is clean and there’s even little tears under his eyes. Gohan has an angry expression, but he also has a second faceplate which features his eyes closed like he’s smacking into Raditz. There is a tiny bit of articulation at the head which is on a ball and the ponytail is as well. Now, I lamented that Raditz doesn’t come with a flight stand like Super Saiyan 3 Goku, but there is one in the box. It’s here for Gohan though. Yeah, it probably would have been a little greedy to expect two, but it is what it is. Gohan needs the stand because he literally can’t stand on his own given the sculpt. It would have been cool if he was supplied with a second lower half that you could pop out so he could stand, but if such a thing were at the expense of the stand then I guess I’m fine. If you don’t value the Gohan much, you can just leave him in the box and give the stand to Raditz, but I personally can’t see myself doing that.

Take that, you mean old space man!

Raditz being a bulky character in Saiyan armor isn’t the most poseable of figures. He’s pretty similar to Nappa when it comes to restrictions, only now you have to deal with that big mass of hair. The head is, like SS# Goku, on a hinged ball peg and there’s another ball joint at the base of the neck. This gives the figure solid range at the head looking in all directions, and since the hinge is behind the face plate, you’ll always know which war it’s oriented. The hair curves away from the body in such a way that it provides for more clearance than one might have expected. There’s also a joint maybe a third of the way down the hair to give it a little nuance. The shoulders are hinged ball pegs and they lift out to the side beyond 90 degrees as the shoulder pads are on hinges and lift out of the way. Those shoulder pads are a nuisance with the crossed-arms piece though and getting them to stay flush with the chest armor is damn near impossible (even the glamour shots feature a gap). The biceps swivel and that’s all good while the double-jointed arms are a bit too beefy to go much past 90 degrees. The hinged ball joints in the wrists are pretty standard, but the design of the Saiyan armor restricts the range pretty severely.

If you switch to the extended tail you technically gain another point of articulation.

In the torso, we get a ball joint. I’m not detecting a hinge in there so it just goes forward and back a bit. There’s some rotation and tilt, but do be mindful of paint rub on the abdomen when doing so. The waist does rotate a little bit, but it’s pretty minimal, while the armor bits down here are all hinged as well. There’s a decent chance they’ll pop off repeatedly when fiddling with this guy, but try not to get too frustrated. The hips go out to the side maybe 45 degrees, so no splits for Raditz. They kick forward nearly 90, and go back a bit. There is a thigh swivel and it’s incorporated into the sculpt rather well and the double-jointed knees, like the elbows, only go a little past 90 because of the chunky anatomy. It’s one of the better looking knee joints as a result since there’s no gapping present. The ankles are restricted like the wrists, but you get a bit of a rocker and they’ll move forward, but not much back. There’s also a toe hinge, if that’s something you value. It’s not a good one though as it doesn’t stay flush with the sole of the boot.

“Ah hahahaha! Need a hand, green man!”

Raditz is a bulky figure and mostly moves like one. His biggest issues from an articulation standpoint stem from the design of the Saiyan armor. Bandai hasn’t really come up with a good way of doing it as the hinges just don’t work very well. Yes, they’ll get out of the way for certain poses, but it looks stupid when there’s this big gap between the chest and shoulder. They almost need to be on a track instead so then can slide back and create the illusion that the armor is bending. Or, Bandai should just supply different shapes that plug in. That would probably be the most aesthetically pleasing approach, but it would probably be more expensive. Though given the amount of characters that wear this style of armor, I think they’d be able to make their money back. It would also provide for a reasonable excuse to reissue the Ginyu Force, and since they’d be a little different from the original P-Bandai releases, it’s something they could do without betraying the intent of that service. My figure did have a fairly loose left hip joint. I popped the leg off and found it was drowning in some kind of a lubricant. It wasn’t a clear oil, but more like Crisco as it was a milky color. I ran some dry Q-Tips through the hip and leg and it’s much better now. If yours is loose you may want to take a look for yourself.

“What?! His power level is rising?!”

Despite some qualms I have with this figure, I do mostly like it and I think it’s a great representation of Raditz. Yes, the colors are no longer anime accurate, but they’re close enough. If the armor had been a carbon copy of Nappa’s then it would bother me more, and really the only thing that bothers me are the red bands now being silver. Everything else looks great and the little, in-scale, Gohan is a fun inclusion. I wish we could get more of these slug style figures for the various kids and little guys in the show because the articulated figures of Kid Goku, Krillin, and others are way too big. The bad portrait is a definitely a bummer though. Some could wave it off as not a big deal since he has other display options, but we’re talking about an $85 release. That shouldn’t happen, and for a company in this business to just throw their hands in the air over it does not engender much consumer loyalty. For whatever reason, I’ve always been drawn to the design of Raditz so I’m glad I finally gave in to my own wants and picked up a figure of the character. Maybe this means we’ll now get a new Goku from this fight with a special, snap-on, Special Beam Canon to reenact one of the most iconic shots from the anime? I’m honestly surprised it hasn’t happened yet, but we also still haven’t received a Kamehameha Goku vs Vegeta’s Galick Gun style of release so there’s still plenty of iconic moments left wanting and it wouldn’t shock me if Bandai gets to them all some day.

If you’re interested in more S.H.Figuarts releases then I got you covered:

S.H.Figuarts Piccolo: The Proud Namekian

When the S.H.Figuarts line was launched years ago and Dragon Ball Z was at the forefront, it wasn’t Goku who got to be the first figure out of the gate. Nope, it was Piccolo. That figure caught my attention when it was announced even though I had not purchased a Dragon Ball figure in quite…

Keep reading
by Joe

S.H.Figuarts Nappa – Event Exclusive Color Edition

When it comes to my S.H.Figuarts collection, I’ve been able to largely keep to just Dragon Ball. And by Dragon Ball, I mean the original anime and manga that centered on a young boy named Goku. Even though that’s my favorite edition of the venerable series, it doesn’t mean my favorite is the one shared…

Keep reading
by Joe

S.H.Figuarts Dragon Ball Z Super Saiyan 3 Son Goku

I believe I have touched on it before, and it’s also probably common knowledge among fans of Dragon Ball, that the story was supposed to end with Gohan’s triumph over Perfect Cell. Goku was dead and gone having sacrificed himself to save the world, but his son would carry on his legacy in his own…

Keep reading
by Joe

Leave a comment   |  tags: , , , , , , , | posted in Television, toys

February 7, 2024

S.H.Figuarts Dragon Ball Z Super Saiyan 3 Son Goku

By Joe
He’s one cocky son of a monkey.

I believe I have touched on it before, and it’s also probably common knowledge among fans of Dragon Ball, that the story was supposed to end with Gohan’s triumph over Perfect Cell. Goku was dead and gone having sacrificed himself to save the world, but his son would carry on his legacy in his own way. Or at least that was one possible ending. Series creator Akira Toriyama has said to have had many endings in mind, some even before the Z era began. The thing is, Dragon Ball was really popular and when something is really popular there are a lot of people that don’t want it to end for purely artistic reasons. No, they want to run that thing into the ground! Squeeze every last coin from its corpse before it gets put away to be rebooted in 10 years. Whether it was supposed to end or not with Gohan’s triumph, it did not. And if you’re going to keep the story going, well you have to bring Goku back and give him an awesome new power-up.

Goku was able to power-up while dead and it did wonders for his hair. Not so much his eyebrows.

When Gohan beat Cell he broke through the Super Saiyan barrier to reach an awesome new height. It was basically the goal of all of the Saiyan characters during that arc and it was accomplished by the youngest of them all fulfilling his own character arc which essentially began in the first episode of Dragon Ball Z. Gohan’s Super Saiyan hair was sort of the least impressive of the four Super Saiyans as it kind of just looked like Goku’s base form hair, only blond. When he breaks past that it shoots up and looks pretty cool and is more like the other characters. He’s also given an aura that crackles with blue lightning which would become the defining feature of what is now called Super Saiyan 2 because when the form was applied to Goku and Vegeta there was really little room for their hair to shoot higher. Maybe that’s why when it came time to design Super Saiyan 3 Toriyama made sure it was quite distinct. It keeps the blue lightning, but the hair goes way beyond big. For Goku, his hair is almost as long as he is tall. For Gotenks, it might be even more. The characters also lose their eyebrows, for some reason, which are replaced by a Piccolo-like ridge for their brow. They eyes also turn teal, but pick-up a black iris too.

Even Sonic is jealous of this flow.

I’ve talked to a lot of fans who state that Super Saiyan 3 is their favorite look of them all (and at this point, there are a lot of Saiyan transformations). For me, it’s never been that high on my list. I don’t dislike it or anything, but its presence in the anime was much smaller than the standard Super Saiyan look. It doesn’t even have a victory under its belt, though when Goku debuts the form against Majin Buu, it’s noted by Piccolo that he felt Goku could have won the battle and Goku more or less confirms that he could have. He opted not to as, at the time of the fight, he was technically dead and felt that a dead guy shouldn’t be the one to save the world. It’s an interesting thought, though since your family inhabits that world still you may want to just do them a solid, Goku. Goku does tackle Kid Buu in the form, but he basically runs out of gas as by then he’s alive (just go with it) and finding the form hard to maintain. That’s a feature of the form that basically sticks to it as much later in Dragon Ball Super when Goku shows the returning Future Trunks the form, Vegeta dismisses it as being too costly in energy to wield. I do think some of that stems from Vegeta being just a wee bit jealous that Goku cracked yet another barrier he failed to.

I call this his cave man face.

Because Dragon Ball Z originally ended with the battle against Kid Buu, Super Saiyan 3 didn’t get a lot of screentime. When the series returned with the film Battle of Gods, the form was essentially replaced by Super Saiyan God and the forms that followed that. I also personally only ever watched the Buu Saga once. By then, I was burned out by the slow drip on Toonami and I was just buying the VHS releases of the show as they came out. I think they were 25 bucks a pop for 3 episodes, a terrible value, but apparently I had enough cash laying around. I basically watched them all once, then never again, where as I saw the earlier sagas repeatedly on television. I don’t even have all of those tapes anymore as some of them got damaged from water in my garage so I just tossed all of them. Part of me regrets doing that as VHS nostalgia is on the rise and who knows where it will take us? What motivated me to finally pick up this figure (yes, I swear this post is an action figure review) is that I’ve been doing a rewatch of the series (well, Dragon Ball Z Kai technically as I don’t have the time for the original) with my kids and we recently got to the Super Saiyan 3 episode and my daughter pointed out to me that I don’t have a Super Saiyan 3 Goku in my collection. When a kid throws shade at your toys, you have to respond. I was considering picking up the 2021 reissue of the figure as it’s still in stock on Big Bad Toy Store, but it’s 70 bucks. That’s pretty steep for a figure I don’t know how badly I need.

He pairs pretty well with the standard Tamashii Nations yellow aura.

As luck would have it, YouTuber Toy Bro (real name Jared) recently decided to clear out some stuff he no longer wanted. I follow him on Twitter (or whatever it’s called) and happened to be scrolling through my feed when one of his for sale posts popped up containing a Super Saiyan 3 Goku for a great price. I immediately sent him a DM, and because I apparently haven’t bought anything off of Twitter in quite some time, my account immediately got locked for suspicious behavior. Thanks, Elon! I unlocked it pretty quickly and once I sent the DM he got back to me right away. We exchanged PayPal info, and Goku was on his way the next day. If you’re thinking of buying off of Toy Bro, I certainly recommend it so thanks to Jared for the hook-up which saved me about 30 bucks. If you’re curious what he had to say about this figure (I don’t think it’s this exact figure, I’m guessing the one he sold me was an extra) you can check out his video review here. I’ll probably watch it when I’m done typing this to see if his thoughts align with mine.

He unfortunately does not pair well with the Super Saiyan 2 aura as the giant hair prevents him from being able to get in close to have the lightning parts surround him.

This is definitely the longest intro to a figure review I’ve done, but part of that is because there isn’t a ton here for me to talk about. This figure is pretty old and I’m not sure if this is the first version released in 2017 or the reissue, but we’re essentially dealing with the same Goku body Bandai has released several times at this point, but with crazy Super Saiyan 3 hair. That’s why it’s a bit of a surprise to me the reissue is so expensive, but with the hair being what it is, it requires a larger box which takes up more room, it’s heavier, and maybe all of that is enough to drive the costs up. Or maybe BBTS has just slapped their own surcharge on the thing and it was originally less in 2021 (the other outlets that still have it in stock have it priced similarly, so it isn’t just BBTS).

A Goku like other Gokus, and yet not.

Goku stands about 5.5″ to the top of his face, taller if you include the hair. The hair sticks out about 3.5″ from his head so it’s pretty damn big. It’s cast in yellow, but has a top coat of a pearlescent paint to give it a shiny, sparkly, finish. There’s some orange where the hair meets the head for shading and it looks pretty sharp. The facial details are in place, though this figure predates what Bandai has been doing the past year or so with the faces on its figures so it has a softer, less-detailed, look compared with the more recent offerings. There’s still a noticeable outline around the eyes, and for some reason there’s some shading in the ear, so it’s not as if the face looks bad or anything. I just currently have him next to the newest version of Super Saiyan Vegeta and I’m missing the extra paint for the brow lines and creases around the eyes.

Some of the forms that followed Super Saiyan 3.

After that, the body is mostly unpainted plastic. The exposed flesh on the chest as well as the blue undershirt is painted as are the boots and wrist straps. The rest is bare plastic. There’s a very light application of shading around the crotch which is probably unnecessary. It’s at least not as heavy as some other figures which make it appear as if the character wet its pants. The lack of paint gives the figure a very clean look, just not exactly flashy. At least for the body as the hair is very flashy. And since this body is exactly the same as other Goku figures I’ve looked at, I don’t feel a need to rundown the articulation again. This figure does feature articulated hair as it’s connected to itself at two different points. They don’t really offer much as the hair is pretty firm and also really spiky. You actually have to be pretty careful handling it because it hurts! The head is also connected to the neck in a slightly different manner than usual and I think it’s basically a hinge. This means no nuance posing, but he can look down just fine and the rotation is there as long as you’re willing to work with that hair. And the hair obviously adds substantial weight to the figure and it does make the figure more difficult to stand than most, but it’s still doable. It needs a lot of shelf space though since the hair does extend beyond the figure quite a bit. The other joints feel a bit tighter than usual and I’m curious if that is deliberate to help offset the weight of the hair or just coincidence? Nothing is so tight I had to worry about breaking anything, but he’s tighter than my other Goku figures. And since he’s like those other figures, he also has the flesh-colored plastic inside the torso for the butterfly joint which looks silly from behind when that arms are as far as they’ll go. The plastic should be orange as it’s continuing his shirt, but it’s not.

No effect part, but at least he comes with a flight stand.
He does have a removable halo, which I guess is like an effect part?

The accessories for Super Saiyan 3 Goku are also mostly the same as other Goku figures with only one exception. For hands, we get a pair of fists, the martial arts pose hands, clenchy hands, instant transmission hands, chops, and splayed open. Pretty standard stuff, though I think a lot of Goku figures only bother to provide one instant transmission hand. Interestingly, I never noticed until now that the newer figures have a slightly thicker wrist peg. This means the hands for Super Hero Goku won’t fit on this figure. Goku also has four different expressions to swap between: smirk, teeth-gritting, yelling, and stoic with a side eye. They’re appropriate for the character and the only negative is that they’re just not as well-painted as current figures. Swapping hands and faces is a lot harder than is typical of this line. You may even need to use heat for some of them and I had the wrist hinge come apart on me when swapping one of the hands which is annoying (it’s easily fixed, at least). Goku also comes with an acrylic halo on a post which comes plugged into his hair by default, but can be removed. The actual halo is only slightly frosted rather than yellow like the one that came with Frieza or Super Saiyan 2 Goku. It looks fine, but there’s no way to hide the post so it always looks a little silly to me. Lastly, Goku comes with a standard Tamashii Nations stand. I’m guessing because he’s a bit harder to stand than usual the stand is intended to remedy that. It has the standard claw attachment without the crotch hook and it works well if you just want some added stability or want to put Goku in a flying pose. While I would have loved an actual effect part, I do always like getting another flight stand.

“What?! Just because you grew your hair out doesn’t give you an excuse to get so smug. Bow to me, monkey!”
“Yeah, there won’t be any bowing from me, Frieza.”

Super Saiyan 3 Goku is here to satisfy the urge of DBZ collectors to add this specific version of Goku to their collection. It’s perfectly fine for this line and I really like how the hair turned out. While the body is mostly unpainted, at least it has a pretty matte appearance and I like the shades of orange and blue in use here versus most of the other Goku figures I have. I guess the real question is if I had spent 70 or more dollars on this figure would I be just as content? Probably not. I don’t think I’d have regretted the buy, but I definitely would have felt like I paid too much. It would have been a lot of money for basically just a new head and generic stand. In an era where we’re getting some pretty nice looking reissues for $35, a $70 Super Saiyan 3 Goku reissue is a hard sell.

Feel like there aren’t enough Gokus? There are never enough Gokus!:

S.H.Figuarts Dragon Ball Super Son Goku Super Hero

Back in the early 2000s I was a collector of Irwin Toys’ Dragon Ball Z line of action figures. When I started collecting that line, I just focused on my favorite characters which were primarily Vegeta, Trunks, and Piccolo. Gradually, the collector impulse took over and I started buying entire waves as they came out…

Keep reading
by Joe

1 Comment   |  tags: , , , , , , , | posted in Television, toys

January 24, 2024

S.H.Figuarts Dragon Ball Z Super Saiyan Trunks: Infinite Latent Super Power

By Joe
It’s Trunks with a new hairstyle!

In the waning days of Toys ‘R Us, I found myself at one of the nearby stores in need of something. What that something was, I don’t recall, but since everything was hitting clearance I had a look around the store. TRU had started carrying the Bandai/Tamashii Nations S.H.Figuarts line of action figures which, at that point, was a rarity. That brand was mostly an online only thing for US buyers, though GameStop was stocking them as well. And on that day, they had finally started marking them down. TRU marked them up to start with, so it wasn’t until the clearance price hit 40% off that it even seemed inviting to me to grab the Super Saiyan Trunks figure. I had recently purchased Vegeta, but I wasn’t sure if I really wanted to get sucked into an expensive toy line. This Trunks, depicted with his hair tied back and in his Saiyan battle armor, was in the neighborhood of 45 bucks after the discount. It was certainly better than the 70 or 75 they had wanted initially, but did I really want this version of Trunks?

It turned out, on that day, the answer was, “No.” I carried it up to the register, but while waiting in line I thought better of it and set the figure down and carried on with the purchase I had intended to make. I wouldn’t say I regretted that decision, but as I’ve gone much further down the rabbit hole that is DBZ figures I have questioned if I want that particular version of Trunks on my shelf. It turns out, my decision that day ended up being a very good one as Bandai decided to release that very same Trunks in 2023 with a revamped color scheme and at the budget price of $35. By waiting these years, I saved some money and got a better looking figure – not bad! I obviously didn’t plan it that way, but what really changed between now and then to make me want this figure? Basically, not a whole lot, it’s just harder to pass up at $35.

The first release of this figure featured colors like the Vegeta on the right. This new one matches the new Vegeta (left).

Super Saiyan Trunks is just a reissue of that older figure, but with a really exaggerated subtitle. I don’t really know what they’re going for with “Infinite Latent Power” since that’s not how I’d describe Trunks at all. I guess it’s a nod to the point in the story where Trunks was concealing what he felt was his true power, but in reality, it was the fan-named Ultra Super Saiyan form that’s similar in power to Super Saiyan 2, but is so slow that it’s all but useless in a fight. Though I did kind of wonder why Trunks couldn’t just boost his power and then, rather than engage in a fist fight, just channel it into a massive energy attack? I guess I shouldn’t be putting that much thought into it since that isn’t really the DBZ way, but I will say that Trunks sure did look pretty bad ass in that form. It’s one I’ve always wanted a good action figure of, but this figure is not that. It’s him before that moment when he’s just standing and watching Vegeta take-on Cell. The ponytail look is at least unique to Trunks and it’s fun to see the Super Saiyan hair restrained to some degree, but it does stink he has no signature moment in this look other than getting punked by Vegeta.

Scream for me, Trunks!

As for the figure itself, it’s Trunks in the Cell Saga battle armor. As I mentioned going in, I didn’t get that original release, but I had the Vegeta who followed the same color pattern so I can at least compare this figure to that. This figure is a much richer shade of blue while the previous one was more pale. The powder blue is probably more accurate, but I love this darker shade. It’s probably my favorite shade of blue and blue happens to be my favorite color. The other main difference is the hair which has a shiny, pearl, finish to it. It’s still more yellow than gold, but it has some gold shading in the center part and it looks really nice. Bandai has tackled Super Saiyan hair in a few different ways over the years and this might be the best. Like the blue, it’s not necessarily the most accurate look, but it’s the flashiest. It gives it that impression that it’s glowing and it’s definitely a great hair color for powering-up poses and the like.

I probably prefer the more unique look of Trunks’ debut outfit, but I do enjoy this era of Saiyan battle armor too.

Because this is a figure releases in 2023, that also means the face is improved. Bandai has changed-up how they print/paint the facial details on its figures which really helps to sell these reissues even if you have the original. The hair and suit color are more subjective and even if you prefer the new to the old, I can still see being happy enough with the original to pass, but the face? It looks so good as the details are so much sharper and less soft. Trunks is sporting his stoic look by default and the likeness is terrific. He also has a teeth-gritting face and a yelling face and both look equally great. The hair sculpt features one, thick, bang hanging over his face which looks fine, but I do wish we had an alternate set of banges for the yelling head that has this piece turned upward or something.

Those are what’s new and improved, what isn’t likely any better is the overall paint job. Maybe it’s the budget price on display, but the paint is a lot sloppier than usual. Not so bad that you’ll see it from a shelf, but unusual for an SHF release. The neckline is not smooth at all and pretty fuzzy. The gold paint for the straps and the abdomen and back armor isn’t any better. The straps stop short before they meet the chest plate and the right side of the abdomen piece doesn’t see the paint continue as far as it needs to. The same issue is repeated on the back of the figure at the upper limit of that gold section. Trunks comes with a crossed-arms piece that can connect to his shoulders and that isn’t painted very well either. It’s a shame, because yeah, even though this is a cheaper figure than usual these areas still had to be painted. It doesn’t cost anymore to make sure it’s done right. I don’t think Bandai should be lowering its standards to offer consumers a more budget-friendly option when we’re still dealing with old tools.

Everybody looks pissed.

I already mentioned the three face plates and the crossed arms piece, the only other accessories are some optional hands. Trunks has fists, clenchy hands, and open hands. What he doesn’t have is a non-Super Saiyan head which the original release came with. That’s a bit of a bummer as it would have been cool if we got that here still, but with something other than a neutral portrait so we could mix and match with the Boy From the Future release from earlier in the year. I know, budget price and all that, but still a bummer to see that accessory cut even though I probably wouldn’t have used it.

Trunks doesn’t have any surprises when it comes to articulation, though I was surprised he’s not a lot of reuse from the Super Saiyan Vegeta. Thankfully, Bandai cares about scale to some degree so Trunks and Vegeta are almost entirely unique. Some stuff, like the feet and hands, are almost certainly the same, but just about everything else looks different as Trunks is both taller and leaner than his father. Even with the differences, they move the same. You get the double-ball jointed head which works okay, but the ponytail will get in the way. The neck is on a ball joint so that will help get more range looking down. Shoulders are hinged ball pegs with a butterfly joint. They’ll go out to the side better than horizontal and there are no restrictions with rotation. The butterfly joint is just okay, but it’s not ugly. Trunks doesn’t need to do a Kamehameha pose so it’s not a joint he needs to get a lot out of. In the arms, we get the biceps swivel, double-jointed elbows, and ball-hinged wrists and all works fine. The arms detach at the bicep to facilitate the use of the crossed arms piece. It’s still a pain to get the piece on flush on both arms, but it works okay. It does mean the arms come apart a little too easy sometimes when just messing with the figure, but I suppose it’s better than being too hard like the recently released Beast Gohan.

There’s not a lot of hands included with this set, but it’s probably enough.

In the diaphragm, Trunks has a hinged ball joint so you can lift the chest up and crunch forward and back. This creates more room for the articulation and helps protect the painted parts, though it can lead to some gapping if you bend him too far. The figure can rotate and tilt to the side as well. The waist is a simple ball-peg attachment which is mostly useful for rotation. The hips go out to the side better than 45 degrees, but not quite to splits. The figure has some floating bits in this area and if you can maneuver the thigh piece to slide under them you can get more range, but it’s fickle. Kicking forward goes to about horizontal and he can kick back a fair bit too. There’s a thigh twist, double-jointed knees, and ball-peg ankles which only provide for mediocre range. There is a toe hinge, for good measure.

I’ve always been a little surprised that with this costume being so basic that the figure doesn’t have more range, but it is what it is. It’s not bad, I just think the legs could be better. The ankles are always an issue with the Saiyan boots as well as Goku’s boots. There’s no doubt that their approach here looks lovely, but I wish they did something to get the ankles more range of motion in every direction, including the ankle rocker. Even though Trunks moves well enough, I do find he looks best just standing there, arms folded across his chest, with a grim expression on his face. Pair him with a similar Vegeta (like the reissued one) and you get a pretty bad ass looking father-son duo for your shelf. This isn’t my favorite look for Trunks, but Bandai did this one just fine. And at the price they’re selling it at you really can’t go wrong.

Because you can’t have just one Saiyan on your shelf, here’s a look at a few more:

S.H.Figuarts Dragon Ball GT Super Saiyan 4 Vegeta

We’re back with another action figure review from everyone’s favorite version of Dragon Ball: Dragon Ball GT! And really, the only thing people remember from Dragon Ball GT is the Super Saiyan 4 transformation. Designed to bring the Saiyans back to their more primal roots, the Super Saiyan 4 transformation is pretty much on an…

Keep reading
by Joe

SH Figuarts Super Saiyan Vegeta

He’s the Prince of all Saiyans. The last survivor to have laid eyes on Planet Vegeta, home world of the mighty warriors and birthplace of the legendary Goku. And he’s also a pretty fine toy. Vegeta, arguably the most popular character to emerge from Dragon Ball Z, has seen his likeness cast in numerous forms…

Keep reading
by Joe

Leave a comment   |  tags: , , , , , , | posted in Television, toys