S.H.Figuarts Dragon Ball Super Event Exclusive Color Edition Super Saiyan God Super Saiyan Son Goku Kaio-Ken

My isn’t that title a mouthful? This version of the classic character Goku comes to you from Bandai via New York Comic Con. If I were to simplify that title, I’d call it shiny Super Saiyan Blue Kaio-Ken Goku, which is still pretty wordy. I guess blame Dragon Ball creator Akira Toriyama for the obsession of stacking different power-ups in what I feel is an intentional bit of word play that he likely finds amusing. And I do too! At any rate, this is the last of the convention exclusives I ordered in 2021. All of the other ones, including other Dragon Ball related figures in Nappa, Goku, and Beerus, came from the world famous San Diego Comic Con. Well, that con didn’t actually happen in 2021 as it was virtual due to COVID once again. One of the few big cons to actually take place ended up being New York Comic Con, and while that one tends to be smaller than San Diego, some companies still like to issue event exclusives for it and that’s where this figure comes from. Bandai, in partnership with Bluefin Brands, made this version of Goku available at the event, but also made it available online for folks like me who weren’t going to journey to New York just to get a Goku. It meant a longer wait, but all things considered, this is one of the shorter waits I’ve have to endure in recent memory.

This version of Goku hails from Dragon Ball Super and one of its first, major, arcs. The first two arcs of the show were adaptations of Dragon Ball Z movies, so this era is where Super really felt like its own thing to me. And it was just some tournament that was a bit of a friendly organized by two gods who happen to be brothers and share a rivalry. It introduced some new characters, most notably Hit, and it was during a fight with Hit that Goku dusted off his old Kaio-Ken technique. You remember that one, right? Kaio-Ken was all the rage for about five minutes when Goku took on Vegeta, but it was basically dropped after that. Yeah, technically, Goku used it against Frieza later on, but it was basically as a means to dismiss the technique which would essentially be replaced with the Super Saiyan transformation. It made Kaio-Ken one of those things fans had fun speculating on, “What would using Kaio-Ken as a Super Saiyan do for Goku?!” but the show was done with it.

If you need a primer on the form, it’s basically a technique that temporarily heightens Goku’s speed and power as a multiplier. He did it multiples of 2 and 3 against Vegeta, but would go up to 10 later. In Super, Goku turns to it after his Super Saiyan Blue transformation as the ultimate showing of his power at that moment in the series, though it’s not referenced much after. It does look cool though as Kaio-Ken by itself has a red aura, and combine that with the Blue transformation and you get a blue-purple look. It certainly made sense to explore the mode in figure form, and that’s what Bandai and Tamashii Nations did. And this being an event exclusive, they added some shine as well.

This version of Goku is obviously similar to other versions of Goku in the SHF line. He stands at about 5.5″ to the top of his forehead and roughly 6.75″ to the top of the hair when at his tallest. He’s basically in-line with my Super Saiyan Blue Goku, but this is actually mostly a differently sculpt. I don’t have it, but if I had to guess, this figure shares most of its parts with the Ultra Instinct Sign Goku which depicted Goku from his battle with Jiren. His gi is rather tattered so it needed its own sculpt to capture that. The only pieces this figure can share with the other blue Goku is the head, neck, and arms, though even some of that needed modification. I don’t have either version of Ultra Instinct Goku so this figure has more of a “new” feeling to me than it would others. It was honestly something I hadn’t thought much about until I had the figure in-hand.

What’s going to sell this guy beyond the sculpt is the paint job. The sculpt is fairly nice and I like the rips in the pants and shirt. The finish on the paint is of a pearl quality. The navy shirt takes on a metallic purple as a result and it’s pretty cool to handle and see how the light plays on it. The hair is a semi-translucent plastic with a touch of purple air-brushing, by the looks of it, which gives it a nice effect. The flesh is more saturated than we’re used to seeing due to trying to emulate the Kaio-Ken red effect. Bandai did have to do a lot more color-matching than usual though because of all of the rips in the clothing. The results are a tad mixed. The exposed portion of the chest could stand to be a touch more saturated as I feel like some of the navy color is showing through. The left knee is colored plastic, but the upper and lower portions of the leg surrounding it are painted and it’s not a perfect match. It probably won’t bother most on a shelf, but in-hand it’s pretty noticeable especially when the knee is bent all the way. This finish is also very glossy and gives the figure almost an enamel finish. It also has a different feel than most figures in the line. The plastic feels thicker and since almost everything has this finish applied it has a slippery feeling. That’s not a criticism, just an observation. Aside from the color-matching issues, my only real criticism for the paint is that I wish there was something applied to the torn parts such as a darkening to the interior parts of his pants. I just think it would help that part “pop” a bit more.

The sculpt for this guy is overall pretty good. I already mentioned how the torn pieces of the gi look nice, and we get the usual musculature for Goku that other figures have. This one changes things up with some battle damage in the form of scuffs sculpted into portions of the arms, legs, and chest. I’m torn on if I think Bandai should have added some black linework to those scuffs to bring them out more as they’re not going to show from the shelf. This figure is going for a glowing aura look, so perhaps it would not have made as much sense, though I feel like in those moments Goku’s battle damage becomes even more noticeable in the anime. I could be wrong, I haven’t watched any of these episodes in years. One thing that did surprise me a little is there’s more evidence of mold release on this figure than usual. That’s those rough portions of the figure where it was removed from the actual tools used to create it. There’s basically a full tab on the underside of my figure’s right shoulder that makes it look like it was from a model kit no one bothered to snip. This figure also has those sleeves that peg into the shoulder which I really don’t like. Almost every Goku has that so it’s nothing new, but I’ll continue to complain until they find a better solution. Another common complaint is Goku also could be beefier. From the front, he looks okay. I’d probably widen the chest a little, but it’s mostly a nitpick. From the side though he looks thin. His chest doesn’t push out at all. It’s odd and almost comical. It’s also more pronounced because he doesn’t have the vest to add a little bulk, but this is something all of the figures in this line could stand to improve on. Goku, especially a powered-up Goku, should be thick and buff.

There was a lot of new for me to take-in with the sculpt and paint of this figure, but articulation? That’s pretty much standard. His head is on a tiny, double-ball peg with another ball in the base of the neck. Despite that, he can’t really look up, but can look down. His head feels a little loose, but it seems to be holding a pose all right. The shoulders are on the peg and hinge system with a butterfly joint. The butterfly is really limited, but they at least colored it properly so it’s not ugly, just not particularly functional. There’s a biceps swivel and double-jointed elbow which bends past 90 degrees. The hands are on the usual ball pegs. In the diaphragm, we have the ball-hinge system so you can pull up on the figure if need be. It doesn’t really do a lot though as the figure can’t really crunch forward no matter what you do with the hinge, but he can bend back a little. Mostly, this joint just gives you some swivel and a little tilt, but you have to be mindful of paint rub. At the waist, you can swivel and the belt and rags is a floating piece. At the hips, Goku can almost do a split, kick forward, and kick backwards because he doesn’t have sculpted buns. There’s a little twist there too, and then your usual double-jointed knees below. The knee on the right has a bit more range backwards because it’s a standard, clothed, joint while the exposed left knee has reduced range, but still goes beyond 90 degrees. The ankles are on ball pegs and have the usual range for Goku’s boot design. It goes forward a little, back a fair amount, decent ankle rocker, and a lousy toe hinge. All of the joints are fairly smooth and required no break-in period, so that is always appreciated.

The other unique aspect to this release comes with the accessories and packaging. The optional hands and expressions are fairly standard. We get a stern look, scream, smirk, and a teeth-gritting expression. All of the faces are well painted and I love the shade of blue used for the eyebrows. I wish that was the standard shade of blue for this form of Goku. For hands, we get a set of fists, martial arts pose hands, Kamehameha hands, and wide open “Solar Flare” hands. For a box, he comes in this oversized standard box with the usual event exclusive coloring. It’s oversized because this Goku comes with an aura effect! That’s certainly unusual, and also why this guy cost $60 instead of $50, but it’s worth it. I love effect pieces and for this particular form it’s needed. It’s the standard aura piece, of which I have a yellow version already, and it comes in three pieces: a rear blast and two side pieces. It’s cast in translucent plastic with red at the edge and blue on the inside. The plastic is soft and and partially hollow. The only thing I don’t like is the translucent nature of the plastic means more of the seems are visible, especially towards the bottom of the center piece. It’ll get the job done though, and I hope it doesn’t get that sticky residue my other aura piece has acquired over the years.

This version of Goku is another good selection by Bandai when it comes to event exclusives. Not everyone needs a version of Goku so specific to one look from the show that doesn’t show up much, and the paint application is something that will appeal to some more than others. I thought this figure looked great in the promotional shots, so when Bandai made it available online I said “Why not?” The actual figure in hand pretty much lives up to my expectations. It’s eye-catching and fun and I love adding another aura, even if this one is really specific to this version of Goku. My guess is that most people who bought this are happy with it. I don’t think it’s good enough to win anybody over who didn’t see a spot for this in their collection, but those who want it should be content. Since it was an event exclusive, it’s currently sold out at MSRP so only secondary options are available. This strikes me as the type of release that might be high right now, but could come down in time as it is a bit niche. If you missed out and are having second thoughts, just keep an eye out. Who knows? Maybe a good deal will come around sooner or later.