Tag Archives: super saiyan goku

September 26, 2024

S.H.Figuarts Dragon Ball Z Full Power Frieza

By Joe
He’s a hard guy to get rid of.

Frieza is the villain from Dragon Ball who just refuses to die. His initial battle with the heroes of Dragon Ball Z spans a whopping 30 episodes! Thank goodness that DBZ was a weekday show or else it would have taken more than half a year to see Frieza get taken down. And that’s just talking about the actual fighting, he’s a presence prior to that with the show teasing that this diminutive, effeminate, character is the most powerful being in the universe. And if the confrontation wasn’t long on just a straight episode count, it felt even longer because Frieza has a series of transformations to undergo before reaching full power. I guess since his underling, Zarbon, had a transformation of his own Frieza couldn’t stop at just one. No, he had four distinct forms to cycle through and the one he spent the most time in is his ultimate form – his fourth form. It’s become the most recognizable form of Frieza ever since, and since DBZ action figure collectors want every version of every character, Bandai has cycled through all four for its S.H.Figuarts line.

My Frieza collection could easily be twice the size of this, but I think I’m good for now.

That is, all except for the unofficial fifth form. I say unofficial, but it’s very much official as he does this in both the manga and anime, it’s just not a transformation on the same level as the other forms. Frieza’s full power form is basically his final form during his battle with Goku and it’s a bulked-up version of his fourth form. The whole fight, Frieza keeps teasing his foes that he’s not even using the full might of his awesome power so this bulky version is basically meant to signify that, yes, Frieza is finally going all out. I don’t think it’s ever been retconned to be a suboptimal form similar to the super bulked out Trunks we’d see in later episodes, though when Frieza returns in Dragon Ball Super he’s rarely depicted in such a fashion. And he definitely fares better against the might of the newly transformed Super Saiyan Goku while fighting this way so he doesn’t appear to be sacrificing any speed, though he does ultimately fall.

“Oh Frieza, you’re so swole!”

Naturally, since Bandai has covered Frieza’s first four forms (and his golden one from later) it made sense to just do this Full Power Frieza and consider the villain complete. The figure was sold via the Premium Bandai website in 2023 and has recently started showing up for those who ordered it. This is the extremely buffed out Frieza that I suppose some have always wanted. There’s a part of me that finds this look for Frieza a bit ridiculous. I think the villain works best when he looks somewhat less imposing than most, but packs a lethal punch. I felt the sculpt on display in the renders looked pretty damn spot on though and I tend to like chunkier action figures. It also will pair well with the Legendary Super Saiyan Goku (and even includes an accessory for that figure) release from 2022 and as one of the most iconic confrontations in Dragon Ball Z it felt like a worthwhile addition to the collection.

Frieza has a terrific sculpt, but more shading and paint detail on the battle damage would enhance this figure so much.

Frieza in his full power form comes in the usual box which features a nice window and a bunch of product shots. This one comes courtesy of the Vietnam factory, which has had some hiccups in the past, but appears to be on-par with the stuff we see coming out of China at this point. Frieza stands a shade under 5.25″ which makes him taller than the Fourth Form Frieza, but not as tall as Goku. As promised, he is very bulky. The neck is wider than the head, the shoulders are massive spheres, and the upper body especially is huge. It’s an over-the-top character design that Bandai and Tamashii Nations have done a great job at bringing to life. The purple areas are very glossy, as one would expect, and the white areas have a hint of a blue wash for a little depth. There’s veins and battle damage sculpted all into the body in various places. The articulation is numerous, as is typical of the line, but this figure does as good a job as most in hiding it as best it can. There aren’t any weird spots or massive gaps. The base of the neck is perhaps the one area that could be a little less gappy, but it’s not as bad as the recently released Vegeta.

“Stand back, Goku! I’ll take care of this monster with my Destructo Disc!”

Aside from the blue wash, paint is fairly minimal. The faces are all printed on exceptionally well and nothing appears misaligned or sloppy. There’s black in the ears as well as the finger and toenails. The purple spots appear to mostly be inserts of colored plastic except for the shins. The right shin on my figure is perfect, while the purple on the left is a bit sloppy around the edges. It’s the only real blemish I can find across all of the parts. His tail has also been chopped off at the end and there’s paint on the stub. I like that there’s a slight wash applied, but I do wish Bandai would try painting the sculpted-in battle damage. In the show and manga, those hatch marks are always black or black and red. By leaving them unpainted in the sculpt they’re almost invisible from the shelf and only apparent in-hand. Their sculptors do such a nice job that it’s a shame to see such detail almost go unnoticed.

“What?! He…he…has two?!”

In typical fashion, we do get a large assortment of optional parts with Frieza. For hands, we have a set of fists, clenching, open, flat palm, and open hands with peg holes in the palms. The peg holes are for two, pink, disc effects that have a nice buzzsaw edge and are done on translucent plastic. They plug into the hands, though the posts on them are not glued in so don’t be surprised if the peg stays in the hands when removing them. It’s not really a big deal since those hands only exist to work the effects so as long as one end stays inserted in another it’s fine with me.

The pegs for the disc effects may start in the discs, but they’ll probably come to live in the extra hands.

For portraits, Frieza comes with his standard cocky smile as the default one. The other expressions include a grimace where one eye is more narrow than the other, a teeth-gritting expression, and a yelling head. I’m surprised the grimace doesn’t feature one eye closed entirely as I think that’s where he ended up during the course of battle. He also has a portrait for Legendary Super Saiyan Goku that’s meant to simulate him getting punched in the face. I wish we had the same for Frieza. There are also two clenching feet that can be swapped with his flat feet. The feet can be tough to remove and I had to heat them in water. Without that, the whole ankle assembly was popping out. The hands swap easy enough while the heads can be a little tricky. The factory went with a standard double ball post and it’s a bit of a snug fit for most of the heads. This means that when removing them you may find the neck comes off the figure instead. I’ve been able to manage by making sure I pinch the neck when pulling a head off, but it can be a little frustrating. If you’re having trouble, heating the head with some hot water first would probably do the trick.

Probably the only comparison that matters.

Articulation for Frieza is largely what one would expect, it was just always a question of how effective it would be given the design of the character. I mentioned the double ball for the head and the ball joint at the base of the neck. His neck is so thick that the joint at the base of it will do most of the heavy lifting. The joint at the head is mostly for rotation and a little nuance while the neck will provide your up and down. The ball joint in the torso is going to further help with getting the character to look up while also adding a little crunch, rotation, and tilt. The purple plate in the middle of his torso will limit the crunch a bit, but it is on a hinge so it can move out of the way to some degree while the ball joint at the waist allows for further crunch forward and back. The shoulders are on butterfly joints which have some decent range coming forward, but very little going back. More room could have been cut-out to do so, but I guess someone didn’t want to break-up the sculpt. There’s some play on the shoulders to move up and down and the hinge will bring them out about 90 degrees. Bicep swivel is fine and the double-jointed elbows go a little past 90 degrees before the bulkiness prevents more range. Standard ball hinges at the wrist work fine.

If you like seeing Goku get punched in the face then you’ll like this extra accessory for Goku.

The hips feel like the normal ball-hinge setup. They can just about hit full splits going out to the side while kicking forward is no problem. At about the 90 degree point, the leg will want to go out from the body a bit because the crotch piece, but it will keep going higher. Because of Frieza’s narrow butt, the legs can kick back, but out to the side. There is a thigh swivel and I think the sculptor did a very good job of keeping it tapered as much as possible. Some more recent figures have looked a little goofy in that area. It will pop out from under the crotch piece when manipulating it, but you can slide the top edge of the thigh swivel under that for a more streamlined appearance. The double-jointed knee, like the elbow, will only go a little past 90 because of the bulk. The ball hinges at the ankle work okay, but the shape of the ankle and feet can make the more nuanced stuff a little harder. The tail, which does not come on the figure, connects via the standard hinged ball. It will rotate and has some play on the hinge. It’s mostly for adjustment posing, but it can also function as a third support, if need be.

“I have finally triumphed over you, monkey!”

Frieza is probably going to pose well enough without knocking anyone’s socks off. The butterfly could have been done better, but I don’t know that I disagree with the approach. The accessories are pretty solid as well and it’s always a plus to get energy effects. I do think we needed at least one pointing gesture since that’s such a common way for Frieza to attack. I don’t remember the flat palm gesture playing a role in the fight, but I haven’t watched it in over a year. I do lament the missed opportunity to not include a stump for his left arm and a similar thing for the base of his torso. Frieza got all cut up while fighting Goku and it would have been pretty amusing to be able to display him as he was at the end of that confrontation. He would have required some kind of stand as well, but honestly, every Frieza should have a stand. He, more than most characters from DBZ, is often hovering or flying as opposed to standing.

If ordered last year, Full Power Frieza would have set you back $85 plus shipping (which is usually $10). That’s not a cheap price for an action figure, especially one with so little paint. It’s not grossly out of whack with S.H.Figuarts releases, though he’s definitely not one of the better values. Is it worth it? I like it enough, and it helps that I spent that money roughly 9 months ago so it’s been gone for awhile. What will suck is the cost to acquire the figure now that the sale has been closed. I guess if you just somehow missed this and really need a Full Power Frieza to complete your collection then you’ll pay what you have to. For anyone else, it might be better to admire from afar because I’m guessing the secondary market is going to want somewhere in the neighborhood of $125. If you can get it down closer to $100, it might just be worth it. It’s a fine figure. I love the sculpt, I like the articulation, and there’s some good display options here. With a little more effort and creativity it could have been a truly special release, but as-is it’s probably good enough.

If you want some figures to pair with Frieza, here are a few:

S.H.Figuarts Dragon Ball Z – Mecha Frieza

When you have an action figure line as long in the tooth as the Bandai/Tamashii Nations Dragon Ball Z line from S.H.Figuarts, you tend to find some pretty obscure characters making the jump to plastic. Characters that may have existed for a blink and you miss it kind of moment, but when one’s collection already…

Keep reading
by Joe

S.H.Figuarts Dragon Ball Z Vegeta 24,000 Power Level

When a toy line is as long in the tooth as Bandai’s S.H.Figuarts Dragon Ball Z line, producers tend to start looking in all of the various crevices of the property for new material. We recently looked at a figure that did just that in Mecha Frieza, a version of the chief villain of the…

Keep reading
by Joe

Leave a comment   |  tags: , , , , , , , , , , , , | posted in Television, toys

March 29, 2024

S.H.Figuarts Dragon Ball Z Super Saiyan Son Goku – Legendary Super Saiyan

By Joe
At long last, the legendary Super Saiyan has shown itself!

I can remember a time in my life when I was just dying to see Goku, the hero of Dragon Ball Z, become that which was prophesized: a Super Saiyan! The seed for such a transformation wasn’t planted very early in the show and really only started being mentioned as the original version of the English dub was nearing its end, but it only took a cursory search of the internet to find out what a Super Saiyan was. Unfortunately, Dragon Ball Z wasn’t the hit FUNimation hoped it would be and that original direct-to-syndication order of a hacked-up 65 episodes was where it all ended for a long time. Only after interest was rekindled as we approached the new millennium did FUNimation go back to the localization process. Finally, on October 18th 1999, the legendary hero who was prophesized appeared on US airwaves (more than 8 years after doing so in Japan).

Goku’s initial Super Saiyan transformation was captured in plastic years ago by Bandai and Tamashii Nations. Dubbed “Awakening Super Saiyan,” it was one of the first releases in the S.H.Figuarts line to really catch my eye. I didn’t get it though, nor did I get the World Tour re-release of the figure which came out last year (or late 2022, I can’t remember). Unlike many of the convention exclusive releases in the line over the past few years, the World Tour edition of Super Saiyan Goku did not go up for preorder on the Premium Bandai website. It seemed an odd decision, but I think it was done because this particular figure we’re talking about today went up for preorder around the same time.

Not the proper Frieza to pair with this Goku, but give it time.

Super Saiyan Son Goku – Legendary Super Saiyan is a brand new release that features Goku from a bit later on in his fight against Frieza. The upper part of his gi has been obliterated at this point and his pants are in tatters. The more memorable aspect of this Goku though is just how damn big he got as that fight went on. He is positively jacked, similar to when he overdid it on the Kaio-ken against Vegeta, and his hair somehow seemed to get bigger too. I’ve always wondered if this is how series creator and artist Akira Toriyama envisioned the Super Saiyan transformation at first, then once he decided to make this something basically every Saiyan in the manga could do, decided to dial it back. With Goku as massive as he is against Frieza, there really wasn’t any other place to go with the Super Saiyan look when the characters needed to blow past that barrier. Vegeta in his ascended, buffed-out, state when he takes on Cell isn’t any bigger than Goku was against Frieza.

Look at that smug bastard.

Nonetheless, Goku looks pretty cool during the closing moments of his battle against Frieza and it’s high-time the look was captured in plastic. And since the base 2.0 Goku figure was feeling long in the tooth, it’s just plain nice to get a Goku that’s essentially all new parts. Even stuff like the hands and feet appear to be new tools. When Bandai revealed this figure in early 2023 it quickly rose to the top of my most anticipated figures for the year. I’ve had it for awhile now and since I’ve been buried under SHF releases ever since 2023 ended, I decided to let this one simmer. I didn’t want to review it when it was too new because maybe recency bias would play a large role in how I felt about it. It was even a bit of good fortune that I stumbled into that Super Saiyan 3 Goku because I got to go from this new figure, to an older Goku, and then back to this one. And after all of that I now feel pretty comfortable in declaring that this is one of my all-time favorite releases in the S.H.Figuarts line.

He even has optional bangs, more of a flying pose I think. They’re a bit gappy though especially around the sideburns.

Let’s start off with the details. Goku stands at around 5.35″ to the top of his face and roughly 6.75″ to the top of his hair. This puts the figure at about the same height as past Goku figures with the main difference being he seems to have a slightly shorter neck, but taller hair. It’s probably more accurate to say his neck isn’t any shorter, but that his traps are much bigger giving off the appearance that his head sits a tad lower. And bigger is definitely the name of the game with this Goku as every part of his body has been blown up for this release. Arms, chest, back, thighs – they’re all noticeably larger in size. Even his feet are bigger and there’s sculpted-in battle damage all over the figure. It’s in the form of lines, or cuts, but they’re only sculpted in. I’m surprised there’s no paint wash to bring them out as from a distance they’re hardly noticeable. Of course, if you collect this line then it’s not a big surprise as Bandai isn’t known for its paint apps. The paint on this figure is limited to light shading on the hair (my preferred approach to Super Saiyan hair) and shading on the pants which makes them brighten the further down the leg your eye travels. The boots have some yellow trim and red rope and the details of the face are painted. The paint all looks pretty good, the yellow on the boots could have been more saturated, but there’s not much to speak of.

He also has this alternate hair and bangs combo for when he’s really getting mad.

The sculpt is what is going to win people over with this figure. The hair is huge, but it’s appropriate for the character. The torso is rather messy to look at because of all of the articulation cut into it, but it’s not to such a degree that it’s an eyesore for me. Some may feel differently, but I like what I see. The belt is a floating piece and the tattered remains of the upper part of the uniform are part of the sculpt and it looks really nice. I love the gradient of the orange on the pants and how much it lightens near the bottom. It almost creates the illusion of a glow, an obvious necessity for a Super Saiyan Goku. And I mentioned it before, but it bares repeating, that this is my favorite approach to Super Saiyan hair. It’s molded in the same pale yellow we saw the Super Hero Gohan Super Saiyan head come in, but with some light air-brushing of orange on the front to give it depth. There are no metallic or translucent parts. My only complaint is that his sideburns aren’t part of the hair sculpt so you get an ugly seam with certain looks, but at least the standard bangs hide it.

He does look pretty nice with an aura behind him.

That’s not to say that everything is perfect with this version of Goku. You may have already noticed in my pictures that his chest is a different color than his arms and abs. Depending on your lighting, it’s going to be more obvious. I went with warm lighting waiting until the moment I had the maximum amount of sunlight I was going to have with a mix of white and incandescent light sources. It’s a bit more subtle, but if I had gone with pure white light it would have been even more noticeable. The issue is caused by the factory using a harder plastic for the chest, likely ABS vs the PVC we see elsewhere, which is a shame because I don’t think it needed to. It’s basically a hard overlay, so why not just use the same material as the arms, neck, etc.? My guess it’s a standard operating procedure to use harder plastic for this part of the figure, and no one bothered to try to something else. The other eyesore, for me, is that the pants are real busy around the crotch area. I like the torn parts, but they’re very poofy beneath that giving him a diaper look. Other figures of Goku taper in at the waist and the baggy pants don’t start to flow out from the leg until closer to the knee. This is largely caused by how Bandai has been doing its thigh twists recently and we saw the same with Trunks. I’d like them to stop as we’re not gaining better articulation with this setup, just poofy pants.

Here is where an actual blast would have been nice. Note how from a more head-on angle how the alternate hair also is hardly seamless along the hairline.

This figure also comes loaded with extra stuff. We’re used to getting a wide assortment of hands and 3 or four faceplates, but this Goku comes with even more. For hands, we get a set of fists, martial arts posed, open, clenching, Kamehameha pose, and Kamehameha posed with pegs. The hands all appear to be new sculpts. They have a sharper, more defined, appearance with more pronounced fingernails and bone structure which look really good. For expressions, we get four: smirk, stoic, clenched teeth, and yelling. In what is a unique turn of events, we get two hair options and two bangs options. The standard hair is how Goku looks throughout most of the fight with a collection of bangs hovering over his eyes. The secondary bangs piece has most of the bangs angled up except one piece. I could be wrong, but I think this is how he looked when flying or shooting off a blast. The secondary hair piece has all of his hair shooting up like he’s powering-up. It works great with the yelling face and any aura effects you may have, though the seams around his face are more pronounced with this option. The bangs do come off of this one as well, but they aren’t interchangeable with the others.

We now have a lot of charging Kamehameha effects, but few actual blasts. I only have the itty, bitty, one that came with kid Krillin.

Lastly, we get a charging Kamehameha effect. It’s pretty much the same effect part we’ve been getting a lot lately. For me, this is number four following Super Saiyan 4 Goku, Orange Piccolo, and the Super Saiyan 2 Gohan/Super Saiyan Ghost Goku set. This one is done in a very light, translucent, blue plastic with some white airbrushing on it. It has seven, acrylic, posts that clip in and it can be pegged onto either of the hands with the posts sculpted on. This version feels a little sturdier than some of the other ones I’ve received and plugging in the posts was a lot easier. It’s still a cool and appropriate effect, it’s just a little less special after the fourth one. I’m a little surprised we didn’t get an aura with this release, but recently Bandai unveiled a new aura effect that’s going to be sold with some other effect parts. There’s also a “getting punched” faceplate coming with the new Full Power Frieza so this is one of those releases that will get built out a little more in the future.

All of the extra stuff is wonderful to have, but I was really curious how this Goku would articulate. The older, 2.0 Goku has its issues that are getting harder to overlook as time goes on and this figure represents a chance to push the form forward. And in many ways it does, though it’s probably due less to new approaches to engineering than it is to the figure not having certain limitations to work around such as clothing. The head is on a double-ball peg and there’s a nice range of motion there. The hair isn’t as cumbersome as you may expect, and once combined with the ball joint at the base of the neck, you get all the range a Goku could want. The shoulders are ball-hinged and they peg into a ball and socket joint inside. This means you can raise the arms out to the side on just the hinge which will take the arm past 90 degrees, then use the ball peg inside the torso to raise the shoulders even higher. There is a butterfly joint which allows the figure to bring the arms inside the shoulders so the palms of the hands are practically touching, though it doesn’t let the arms go back very far. The biceps swivel, double-jointed elbows, and ball-hinged wrists all work as well as expected.

A gathering of Goku. Comparing the look of the torn pants on this release to the Kaio-ken version is like night and day.

The torso features a diaphragm joint. It may not be the prettiest in the world, but the joint at least works okay. It feels like a ball joint and it’s best at giving the figure a pivot point and some side-to-side motion. Going forward and back in a crunching motion is limited, but the ball joint at the waste at least helps there, but the ab crunch isn’t significant. At the hips, Bandai went with a soft, rubbery, overlay that goes over the crotch and above it. It’s almost too small to refer to it as a “diaper” because it doesn’t cover any of the thigh. This means it’s very flexible so Goku can kick forward past 90 degrees and also kick back and push on his butt cheeks for added range. Out to the side is no problem, though you may have to finagle the leg in such a way that the thigh slides under the overlay for full splits. The belt will sometimes pop off the sculpted indent on top of the pants, but it’s not too hard to get back into place if it’s even something that bothers you. The knot pegs into the belt and is able to rotate. There is a thigh swivel, though it’s more like a pivot as the range is probably in the neighborhood of 45 degrees. The knees will bend past 90 degrees, but not much beyond that due to the way the pants are sculpted. At the ankles, Bandai finally ditched the ball pegs it had been using for Goku figures and instead gave us nice ball hinges. They still attach via ball pegs so you can pop them out a bit to increase the range. They’re a bit more finicky when it comes to getting them in the best position for stances on your shelf, but much more rewarding than the old setup. The toe hinge is also still present and it’s fine.

This figure is just a couple tweaks away from perfection. The unfortunate thing is that such tweaks are not budget-related, just execution, illustrating how it could have been even better with just a little more effort.

I don’t know if there is anything on the older Goku figures that works better than it does here. I suppose kicking back, but that’s probably it. The articulation cuts in the torso are certainly cleaner on the past figures, but the added cuts here serve a purpose and it’s one they do well at achieving. I don’t think it’s on the level of an Amazing Yamaguchi release where the articulation is so plentiful that it’s ugly, but I can totally understand the person who doesn’t love the aesthetic of this one too. Best of all, the joints are nice and smooth. This is another release for Bandai’s Vietnam factory and it’s, by far, the best figure I’ve handled that has come out of there. The Super Saiyan Trunks – The Boy from the Future was plagued with quality control issues. Not the sort that ruined the figure, but the kind we’re not accustomed to seeing out of Bandai. This figure possesses none of those faults and if it wasn’t printed on the box I would have assumed that it came out of China.

After having this figure for about two months now I have to say I like it more now than I did when I first opened it. This is quite possibly my favorite figure in the line at this point. I’m not even sure which figure even comes close to topping it. Prior to getting this one, I hadn’t really given much thought to which release in this line was my favorite. I really like King Piccolo and I tend to enjoy the figures with more mass. Nappa may have been my favorite, though it’s definitely for the aesthetics and not the articulation as the shoulder pads on him are really cumbersome to work with. Super Saiyan 4 Goku and Vegeta were two that surprised me in how good they are, even if I find the look of that transformation to be so bad it’s good. This Goku however, hits it out of the park. It looks great, moves great, and comes with plenty of stuff. I mentioned an aura effect was almost expected, but I don’t mind its exclusion. If there had been a flight stand though that would have been awesome and really helped push it over the top. In the end, my only real gripes concern the fit of some of the hair pieces and the dis-colored chest piece which are both two things I can overlook. They basically bump it down from a 9.9 to a 9.5 if I were grading on a 10 point scale. If you collect Dragon Ball Z action figures, then this is definitely not the one to miss.

Akira Toriyama April 5, 1955 – March 1, 2024

Postscript: In between writing this and it going live we all received the stunning news that Dragon Ball creator Akira Toriyama had passed away at the age of 68. The entire manga/anime community mourns his loss and his impact can be felt across the globe. What a remarkable legacy. I have no doubt that the characters he created will live on in some capacity, but they’ll never be quite the same again. This must have been what it felt like when Walt Disney died. R.I.P.

I really enjoyed this release, but I also really liked these ones too:

S.H.Figuarts Dragon Ball GT Super Saiyan 4 Goku

In the world of Dragon Ball, there are varying opinions on which version of the anime is superior. Dragon Ball Z is unquestionably the most popular, but there are people (like me) out there who swear by the original Dragon Ball that came before it. More recently, Dragon Ball Super has entered the fray and…

Keep reading
by Joe

S.H. Figuarts Piccolo Daimaoh (King Piccolo)

Before there was the noble Piccolo, trainer of Gohan and ally of Goku, there was the evil King Piccolo. Known as Piccolo Daimaoh outside of the US, King Piccolo was the evil purged from the namekian Kame, who would assume the role of guardian of Earth in the world of Dragon Ball. Piccolo was the…

Keep reading
by Joe

S.H.Figuarts Nappa – Event Exclusive Color Edition

When it comes to my S.H.Figuarts collection, I’ve been able to largely keep to just Dragon Ball. And by Dragon Ball, I mean the original anime and manga that centered on a young boy named Goku. Even though that’s my favorite edition of the venerable series, it doesn’t mean my favorite is the one shared…

Keep reading
by Joe

Leave a comment   |  tags: , , , , , , , , , , , , , , | posted in Television, toys

February 26, 2024

S.H.Figuarts Dragon Ball Z Super Saiyan Son Goku & Super Saiyan 2 Son Gohan Exclusive Edition

By Joe
Time to do this father-son style.

We are now past Valentine’s Day and I’m ready to close the book on San Diego Comic Con 2023. The last action figure exclusive to look at is the two-pack of Super Saiyan Goku and Super Saiyan 2 Gohan. Dragon Ball Z has been around for a long time and has given birth to many iconic images whether it’s Goku and Vegeta squaring off or Goku’s initial transformation into a Super Saiyan or any others. One of the top ones is definitely Gohan finishing off Cell with what has been dubbed the Father-Son Kamehameha. Gohan, bloodied and with his left arm just hanging limp at his side, summons the strength to muscle-up one last blast with his father urging him on from beyond the grave. Goku appears as a spirit behind him as if he’s providing his own blast alongside his son. Whether it’s to be taken literally or not has never been really clear to me, but it’s a dramatic moment and definitely a fan favorite.

Did you think I was going to make you wait until the end?

For Comic Con 2023, Bandai released a two-pack that has shockingly never happened before. A battle damaged Super Saiyan 2 Gohan and a “ghost” Super Saiyan Goku so collectors can essentially reenact that moment as part of their collection. It comes in an oversized box with a black and purple deco and the photography on the box makes it obvious what moment this represents. The window only shows Gohan which almost makes Goku feel like it’s a surprise, or a glorified accessory. Both figures are re-releases of past ones. We’ve seen this base Goku body many times before across several iterations of the character. Gohan is also a re-release, though it’s an older figure and one I’ve never interacted with before. Initially, I was only going to get the event exclusive Raditz, but this release just looked too cool and it earned my $95.

I’ve suddenly found myself with many Gohans.

Let’s talk Gohan first since, as I mentioned earlier, Goku feels more like an accessory here even though he’s a full-fledged action figure. Gohan is, as the box states, in his Super Saiyan 2 form and his purple gi is all tattered and torn. There’s some battle damage painted onto his flesh in places, but no blood. He’s a young teen so he’s much smaller than his father and stands about 4.25″ to the top of his face. He follows some past event exclusives by featuring translucent, yellow, plastic for his hair which has been brushed over with a pearlescent, gold, paint. It’s a pretty heavy coat of paint so it’s actually hard to tell that there’s any translucency to the plastic, but it’s there and it looks pretty nice. I don’t know if I prefer it to painted, yellow, plastic, but it’s fine. The face printing looks sharp and is likely updated from the original release of the figure. Bandai did a good job matching colors the rest of the way, and it helps that the upper body is cast all in flesh-colored plastic. The only painted flesh are the exposed knees. The rest of the paint is fairly minimal. The gi is painted and there’s a darker purple for the inside portions of the torn parts. There’s a little shading around the knees, and then there’s the battle damage. It’s limited to the chest, face, and left arm and I’m surprised there aren’t any cross-hatches on his right arm, but it looks good and at least it isn’t overdone.

I also now have a pair of Super Saiyan 2 boys.
Gohan is a wee bit small for the aura effect.

For optional parts, Gohan has four portraits: stoic, teeth gritting, yelling, and an even bigger yell. The two yelling are certainly pretty similar, but it’s hard to argue anything is missing. For hands, Gohan has a set of fists, open, relaxed, Kamehameha, and Kamehameha hands with pegs on them. And if you get those blast effect hands with pegs, that usually means you get some kind of blast effect and that is true of Gohan. He comes with the charging, Kamehameha, effect. It’s done in translucent, light, blue plastic and consists of a small sphere with slots in it to accommodate seven, acrylic, posts. It’s an effect we’ve seen a few times and it seems like it’s becoming a favorite of Bandai as I think I have four of them now. This one seems lighter in color from the one that came with Orange Piccolo and doesn’t feature any shading. It felt a little softer too and the posts are more finicky, but it’s still a useful accessory.

“G-Gohan?! Is that really you?!”
This Gohan has proven really fun to mess around with. Too bad he’s going to just occupy one pose on my shelf.

When I ordered this set I didn’t really think much about Gohan as a figure because, like I’m guessing most people, he only needs to hit one pose and that’s it. To my surprise though, this is a wonderfully engineered little figure. I’m finding myself really charmed by it and if I didn’t want him on my shelf in his iconic pose he’d make for a great desk figure to fiddle with. His head is on a hinged ball peg, which isn’t my favorite setup as you need to keep track of which way that hinge is going to make use of it. I didn’t mention it in the aesthetics, but I love that the faceplates do not include the sideburns so the fit is seamless. The heads get some tilt, rotation is fine, and there’s a joint at the base of the neck that lets him look up and down, though if you want him to look as far up as he can it will create a gap at the base of the neck. The shoulders are hinged ball pegs and the range is terrific. Gohan’s arms go up past horizontal. The ball peg in the shoulder allows for the arms to come forward and across the chest pretty far. It’s not a true butterfly joint, but since the figure’s chest is so small the clearance is fine. There isn’t much in the way of a floating piece or cap to hide the joint which might turn off some, but it doesn’t bother me at all.

He’s coming for you, Cell!

In the arms, we get the usual biceps swivel and double-jointed elbows which go past 90 degrees. The hands are on hinged ball joints and they work fine. The diaphragm has what feels like a single ball joint that lets Gohan tilt a bit to each side. It only pivots rather than provides for rotation and there’s no forward and back. The waist has a ball joint which rotates and goes forward and back enough. The legs will kick forward past horizontal and kick back almost as far. They don’t go out to the side for full splits, but it’s better than 45 degrees. There is a thigh swivel in each leg and the knees will go a little past 90 degrees. The sculpted tatters interfere a bit. The ankles are the only articulation point I dislike. I think it’s just a ball peg, but Gohan has these sculpted boots that Bandai apparently didn’t want to break up so they’re one, solid, piece except for the toe hinge. They’ll go forward a bit on the ball joint, but not back very far. The ankle rocker is pretty poor, but the toe hinge is at least done well.

Technically not the first dead Goku figure in this line. Or even the second.

That’s Gohan, which means we’re only halfway through this one because we still have to talk about Goku. This Goku is essentially the Super Saiyan Full Power Goku, only now he’s sculpted in blue, translucent, plastic. There’s some darker blue paint for things like his boots and shirt and his face is printed on as well. Some parts of the body are more transparent than others as there’s some air-brushing over his pants. It’s a cool looking figure though and puts any Marvel Legends Iceman to shame. The only parts that aren’t translucent are joints like the knees and the inner part of the butterfly joints, but they don’t stand out in an ugly fashion. He looks great. It’s a figure I never felt like I needed and I still feel that way, but if you’re going to do it it’s hard to imagine it being done better than this.

The translucent effect is pretty neat, but you will want to hide the few non-translucent parts, like the elbow joint, if it can be helped.
This Goku may look different, but he’s still plenty familiar.

Like Gohan, this is a figure that basically only needs to do one thing, but Bandai still outfit him like a full figure. Goku comes with three portraits: stoic, yelling, and teeth-gritting. The printing looks pretty good considering it’s on translucent plastic. If anything the white of the eyes are too opaque, but it’s good that they stand out. For hands, he has the usual Goku assortment: fists, Kamehameha, open, martial arts posed, and a set of Instant Transmission hands. All of the extras are probably good for those who want to have a little fun with their toy photography, but he only needs those Kamehameha hands for me. Articulation is the same as all of the other Goku figures. It’s fine, with some areas showing their age, but he can do what he needs to. The joints are all nice and firm, but not overly tight.

Don’t worry guys, Goku will be watching over you. Always watching…

Like I said, this set just needs to be able to hit one pose and it does. It actually does it even better than I would have expected. This is a great release as an event exclusive. It’s a variant of two of the most popular characters in Dragon Ball Z and it’s centered on an iconic moment. It’s a wonder that Bandai hasn’t done more of this, but I wouldn’t be surprised if there’s more to come. There are plenty of other spots they could look to, and in a way they’ve already started by including certain extra parts and accessories with some figures. They orchestrated Vegeta defeating Android 19 by including a new portrait with 19 and the upcoming full power Frieza comes with a new face for Legendary Super Saiyan Goku. I’m curious to see how far they go with this and it’s a natural path considering they’ve released damn near every major character at this point. As for this release, it was an event exclusive that Premium Bandai put for preorder on its website. It’s been made and distributed, but they may unload extra stock on another retailer so keep your eyes opened if you missed out. I like it enough to recommend it even at a mark-up, but certainly don’t sleep on it because it’s only likely to go up.

We’ve got plenty more from the world of Dragon Ball to talk about:

S.H.Figuarts Dragon Ball Super: Super Hero Orange Piccolo

When Akira Toriyama set out to draft the plot for Dragon Ball Super: Super Hero his original goal for the film was to take a favorite character of his and give him an upgrade. That character was Piccolo who had basically been left behind by the likes of Goku and Vegeta way back at the…

Keep reading
by Joe

S.H.Figuarts Dragon Ball Super: Super Hero Son Gohan Beast

Last summer, fans of Dragon Ball were treated to a new movie: Dragon Ball Super: Super Hero. The intended purpose of the movie seemed to be to take two somewhat forgotten characters in Piccolo and Gohan and give them a makeover. The manga and anime Dragon Ball Super has basically been a story about Goku…

Keep reading
by Joe

Leave a comment   |  tags: , , , , , , , , , , | posted in Television, toys