Tag Archives: kenner

Star Wars: The Vintage Collection Boba Fett (Vintage Comic Art)

Make way for the Fett man!

I’ve been collecting action figures in some capacity for my whole life, and it occurred to me now that I’ve never owned the Fett man. That’s Boba Fett, who is one of the most iconic characters from Star Wars and also pretty noteworthy in the world of action figures. I am not the place for Star Wars history, but it’s my understanding that the original Boba Fett figure was hard to come by as safety standards prevented its release because of the missile firing action it possessed. Or it was released, then recalled, something like that. Needless to say, that original Boba Fett is a prized possession for vintage Star Wars collectors and the notoriety surrounding it has only added to the character’s popularity.

I didn’t collect the original Kenner line of Star Wars toys, but I did get into The Power of the Force which debuted in the 90s. My interest in it was somewhat of a passing one. I think I got a bunch of money for a birthday to do as I pleased and saw it as the right time to build up a Star Wars collection. Following that, it didn’t move much farther so I had plenty of gaps in my collection (the only Han Solo I had was the mail-away one in Storm Trooper armor you could get via Froot Loops), but the only one I was a little bothered by was my lack of Boba Fett. He just wasn’t in stock that day, and really, not a ton was as I ended up with quite a few figures from the Shadows of the Empire line. I would have opportunities to get Boba Fett later, and his spaceship, but when push came to shove I just didn’t want it enough.

I’m guessing a lot of folks leave these on card because it does display well.

As an adult, I don’t buy many Star Wars figures, but I do have a trio from The Vintage Collection. This is the Kenner homage line, but with more articulation and more paint. I liked the Mandalorian I picked up, but I really didn’t care for the Dark Trooper. I was so unimpressed with that figure that when I went to post my review I couldn’t be bothered to retake my photos which had come out rather blurry. I almost didn’t post it, but I took the time to write it so I let it slip through. I thought I was done with The Vintage Collection, but then I came across this Boba Fett the other day. I had previously considered getting the Kenner colors version of basically the same figure a few months back, but Hasbro wanted $26 for it so I wasn’t all that tempted. For some reason, $20 felt that much better when it came to this new one so let’s talk about it.

I just find the little guy charming and he does kind of fit in with the Christmas figures.

This Boba Fett is labeled as the Vintage Comic Art variant. As far as I know, the sculpt is 100% reuse from past Boba Fett figures and it’s part of a wave of Fett variants because the guy sells. This one is exclusive to Target which is where I found it. For some reason, it didn’t scan when I tried to buy it, but it wasn’t due to a register lock, so an associate just entered a price for me. I got it for $20, which is actually a buck cheaper than it’s supposed to be (thanks Target employee!) so I guess I have a tiny bit of surplus value in it. I’ve actually had that happen a couple of times at Target where I tell the associate the right price and they give it to me for less anyway. One older woman let me have a $4 Hot Wheel for a buck because I think she just felt that’s what it was worth which amused me.

Just look at that guy – such a bad ass!

Anyway, I don’t know where this look for Boba Fett comes from, but I’m going to assume it’s from a comic book adaptation of The Empire Strikes Back since that’s what’s listed on it. Again, other places could better inform you on the history of this thing, but what attracted me to it was the colors. This figure is cast mostly in a rich, dark, green with mostly red and white mixed in. Maybe it’s my love of Christmas influencing me a bit, but this color scheme works for me. It just pops, and I like where the red is utilized. What really works though is the helmet which has this blue shading on it between the black and white. And that little dot of white on the top of the helmet is just – chef’s kiss! It looks great! And I found myself taking it to the register against my better judgement. I think what also works in its favor is the size. As an homage line, we’re talking about a 3.75″ figure, give or take, where that colored plastic look comes off better. On the few Black Series figures I have, the red plastic in particular comes across as cheap, but it’s not as noticeable in a smaller scale.

I’m not in love with the soft goods or the appearance of the jetpack, but it’s not like they’re displayed prominently.

The presentation is rather lovely for this scale and the figure also comes with a couple of accessories. There’s a non-removable soft goods cape affixed to the back of the figure’s left shoulder. It has some holes in it so that it looks weathered, I suppose, though it does throw off the look of the figure a little bit. On the other hand, the plastic cape on the Din Djarin figure is a bit of a pain to deal with so I can’t say I mind too much. On the figure’s back is the jetpack with a non-removable missile, which is a little disappointing. The paint on it isn’t super detailed, but I’m guessing it wasn’t in the comic it’s based on too.

“Stick ’em up, unless you can tell me where I can stick this handgun then please help me!”

For weapons, Boba Fett gets a sidearm and a short rifle with a sling on it. The handgun is basically cast all in a light blue, while the rifle is solid purple. It’s an interesting look, for sure, and it works for me as a toy. There are no optional hands, but both hands are trigger-finger hands so he can hold a weapon in either hand. He can casually hold the rifle in two hands, the classic Boba Fett pose, though he can’t aim it with two hands. I like both, but I’m disappointed that he doesn’t have a holster for the sidearm. Now, he doesn’t have one on the card art, but maybe just give him one anyway? Or find a way to include one on his back or something. I feel like he has to be displayed holding the handgun or else it will get lost. The rifle at least has the sling so it can go over a shoulder, but the handgun has to be just shoved somewhere it’s not supposed to go if you want to store it.

Articulation is just okay. It’s a bit of a bummer that he can’t really do a two-handed, gun-firing, sort of pose.

The articulation on this guy is exactly the same as Din Djarin. I’m guessing some of the parts are the same, but there’s plenty that isn’t. This figure is going to pose much better than those old Kenner figures and really about as well as The Black Series. The limitations the Holiday Mandalorian I have possesses are pretty much the same here. It’s the torso that’s limiting since Fett wears armor so you don’t get anything in the diaphragm. The lack of butterfly joints at the shoulder prevent some of those gun holding poses you would like to have and the knees and elbows are single-hinged. The only joints I don’t like really are the hips, which are hinged ball pegs. Ball and socket joints would work better and I don’t see how they would cost anymore other than the expense of switching from one thing to another. The feet are a little on the small side so this guy might fall over here and there, but once you find a pose it seems to be fine.

The big thing with this series and figure is just the cost versus what you get. Should a 3.75″ figure cost over 20 bucks? I think in the minds of most the answer is “No.” I do wish we got a little more for our buck like maybe an effect part for the jetpack. This one doesn’t even have holes to accept the effect parts that came with the Dark Trooper which did bum me out a bit. A removable missile or a blasting missile effect would have been awesome too. I’d have taken that over the sidearm. My feeling with a lot of what Hasbro is doing (and it’s worse in the Marvel Legends line) with its prices is that they’re going up without the consumer feeling like they’re getting something extra. In fact, they seem to be cutting back on a lot of paint apps, accessories, etc. This one isn’t that bad as we at least get two guns and a fun paint job, but there’s no way to really downplay that the asking price is more than we’re used to.

At least he can handle this pose.

As someone who never owned a Boba Fett before, I’m happy with this being my first. I think he looks cool, he looks fun, and he adds something to my modest nook of Star Wars figures. It’s the appearance that sells this, so if you like it go out and grab one. If you’re not a completist though, maybe double-check and make sure you don’t prefer a different variant as there’s no shortage of Boba Fett these days. This figure is exclusive to Target in the US and my store at least got a whole bunch so I don’t think it will be super hard to find, but it might be the type of release where if you wait too long you could miss your chance.

If you would like to read more Star Wars toy reviews, I’ve got a few more you can check out:

Star Wars: The Vintage Collection Dark Trooper

I’m back with another Star Wars action figure review! Actually, I don’t do these very often. This is only the third such review out of me because I usually don’t collect Star Wars. Sure, I think the franchise is fine and I did collect figures as a kid, but it’s not something I’m drawn to…

Keep reading

Star Wars The Black Series Mandalorian Warrior (Holiday Edition)

We’re getting to Christmas coverage at The Nostalgia Spot one day early this year with this look at one of the latest in the Holiday Collection from Hasbro’s Star Wars line of action figures referred to as The Black Series. I have previously looked at a figure from the very popular streaming show The Mandalorian…

Keep reading

Star Wars: The Vintage Collection Dark Trooper

Isn’t he a cute little fella?

I’m back with another Star Wars action figure review! Actually, I don’t do these very often. This is only the third such review out of me because I usually don’t collect Star Wars. Sure, I think the franchise is fine and I did collect figures as a kid, but it’s not something I’m drawn to in the same way I am other properties. And that’s worked fine for me since there’s tons of Star Wars content and reviewers out there. And when it comes to Star Wars, I’m basically just an original trilogy fan, but the recent output of television from Disney has actually been pretty solid so it’s no surprise that this is yet another review of a character featured on The Mandalorian.

The Mandalorian is basically Star Wars as a spaghetti western. It’s easy to digest, but has some overarching plots (especially Season 3), and the characters are plenty likable. One of my favorite designs from the show came from the Season 2 finale which featured the Dark Troopers. These robotic replacements for Storm Troopers are these big, hulking, glossy, black instruments of death, though I don’t think they actually kill anyone in the show (it’s been awhile). The design was great though and it was only a matter of time until action figures arrived. The emphasis being on the word “time” there as Disney apparently didn’t give Star Wars license holder Hasbro any advance notice of what was coming in that season so even though it aired over two years ago we’re just now getting to the figures.

So…he looks a bit different on the box, no?

If you are a collector of Star Wars action figures from Hasbro then you probably know that the company has three styles of releases: The Black Series, The Vintage Collection, and the Retro Collection. The Black Series is the roughly 1:12, 6″ scale characters that Hasbro has made a focus of its action figures division ever since it brought back Marvel Legends. The Retro Collection is basically a 5 points of articulation line that harkens back to the original Star Wars line from Kenner. It’s a style that’s basically been resurrected by Super7 and it’s ReAction series and Hasbro wanted to tap into that themselves. The Vintage Collection, which is where the figure we’re talking about hails from, is like a combination of the two. It’s a 3.75″ scale line, but it features modern sculpting, paint, and articulation. It’s the only line from Hasbro that has much appeal for me. I’m not a scale snob when it comes to my collecting and I appreciate a variety, it just so happens that most of the properties I enjoy most either come in 1:12 or 1:10 scales. The smaller 1:18 stuff is a scale I’ve always found really charming and it’s a scale that’s perfect for Star Wars given the presence of vehicles. The one figure I did review from the line (I did also purchase a Koska Reeves figure, but never reviewed it) was a release I really enjoyed so adding to that has always been a possibility.

And I probably would have added more to it by now if not for one thing. Hasbro, for awhile, seemed to resist raising prices during the pandemic and was holding strong for awhile. However, it being a publicly traded company, eventually caved to shareholder demands and we’ve seen price hikes across the board from Hasbro over the past year. And it’s like they’ve been playing catch-up as the increases have been rather extreme. The Vintage Collection was basically Hasbro’s best bargain just a couple of years ago. I want to say the Koska figure I bought was only $12. Recently, I was at my local Target and saw the new, Kenner-inspired, Boba Fett and I was fixing to add him to my tiny collection, but he rang-up at $23! Yeah, no way. And the figure I knew I wanted when I first saw the episode was this Dark Trooper, but Hasbro wanted $26 for this one and I had to pass. Then, somewhat out of the blue, the figure hit clearance at the more palpable price of $17.50. Still higher than I think it should be, but I had wanted this for over two years so I gave in. And since the order pick-up option I selected actually sold out before the unit could be secured for me, I got free shipping out of it so let’s take a look and see if this thing is even worth the discounted price I got it for.

This guy is a bit of a nightmare to try to photograph. He’s so dark the camera often doesn’t want to focus on him.

The Dark Trooper comes in Hasbro’s plastic-free packaging which I think they’ve already backtracked on. It’s just a cardboard box with an image of the figure on the front and a hanger affixed to the back. Inside the box is a cardboard tray that the figure is slotted into plus a brown paper pouch with the accessories. I buy most of my toys online so I have not cared one bit about the loss of the plastic bubble on the packaging. This hobby I and many others enjoy unfortunately is a big polluter since they’re primarily all plastic so I was in favor of Hasbro’s move to plastic-free, regardless of the company’s true motives (which I’m not speculating on). It seems to be going away though, so be it.

Bang!

The Dark Trooper stands at just about 4″ tall and at first glance, wow, this thing does not look like the figure on the box. It’s cast in all black plastic with almost no paint. The paint is limited to the metallic portions of the elbows, wrists, and knees plus some patches on the biceps. There’s also some red dots on the chest, but that’s it. In the helmet, is red, transparent, plastic to create a light-piping effect that really doesn’t work very well at this scale. You have to basically hold a light to the back of the head (where the rear of the plastic is present in the form of a red square) to get anything out of it. They may have been better off just trying to paint glowing red eyes, or better yet, they could have done both and given us some options. As it stands, the eyes mostly get lost in the face.

“And now I squish your little friend!”

That is unfortunate, but what is really disappointing for me is the lack of a chrome-like finish. The image on the box is either a render or placed under some very harsh light. Even blasting white light on my figure at close range I can’t get it to resemble that finish even a little bit. It’s a glossy plastic, but not overly so, and it very much looks like plastic. There is no illusion here that this guy could be made of the same material as the actual character. The black plastic almost seems to suck in the light more than throw it back. And that could be due to its composition as it’s a soft plastic, there’s a gummy-ness to it, and not something harder. I think a harder plastic would have thrown more light back at the viewer and helped sell the figure. Or maybe it just needed some paint. The face, especially, just doesn’t translate because of the all black plastic. The sculpt is there, but you have to get in close to appreciate it.

“Whoa! How did you do that?!”

And that’s an issue with the whole figure. Granted, this scale is not the best choice to celebrate a sculpt, but it still can if the finish is done properly. And the sculpt looks pretty nice. There’s a lot of detail in the abdomen and the limbs, and really, all throughout the figure. There is a floating crotch piece that has these little pistons on them, at least I think that’s what they are, that can get a little messed up. It’s a softer plastic and one of the four pistons on mine is warped a bit, but at least it’s on the rear of the figure. The left shoulder is also a little jacked-up, it probably didn’t come out of the mold clean, but otherwise I don’t have any issues with the sculpt. At first glance I thought the hands might be a little on the small side, but after a little research, that seems to be a case with the design and not the figure.

::Muffled screams::

The Dark Trooper does come with a handful of accessories. For extra parts we get two fists. I don’t see myself using them, but I guess it’s always useful to have some fists. The default hands are a trigger finger right hand and a gripping left which work well for two-handed weapon poses. And the main weapon is a blaster rifle of some kind. It’s all black plastic and it can be either held by the Dark Trooper or it can be slotted into the right thigh. There are thrust effects that peg into the feet. They’re a semi-transparent orange plastic and look okay, but without a flight stand they’re kind of useless. The Dark Trooper also comes with its own, personal, hangar. It has to be assembled as it comes in three pieces and it was a little harder than I expected it would be. It’s black plastic with some red paint in places and it’s fine. It perhaps creates some desire for people to army build these guys so you can have some inactive units in your display, but at these prices I don’t know if many collectors want to do that. The hangar also has two cables that plug into it that I guess are supposed to curl under the arms. I guess they’re like charging cables? I don’t know. They don’t really hold the figure in place so they’re rather perfunctory.

Go to bed, Dark Trooper, I’m sick of looking at you!

One of the hallmarks of this line is you get small, retro-inspired, action figures that move like modern toys. The Dark Trooper mostly comes as advertised in that regard, but it’s not without its flaws. The head feels like it’s on a ball peg of some kind with another joint at the base of the neck. You get your rotation and the figure looks down well enough. The range going up is minimal and you only get a little bit of tilt out of the joint. The shoulders are ball-hinged and the trooper can just about raise its arms out to a horizontal position. Rotating forward and back is fine, though the shoulder pad will prevent full rotation there. At the elbow there’s a swivel point which is basically your biceps swivel and the hinge will allow for a 90 degree bend. The wrists swivel and feature a large hinge as well that moves in a horizontal fashion. There is, sadly, no vertical hinge on the trigger hand. In the diaphragm, there’s a ball joint that’s mostly for rotation. There’s a little tilt and a tiny amount of forward and back, but not much. The hips can kick forward about 90 degrees and they go back a little bit as well. Out to the side, you basically get to a full split so that’s good. There is a thigh swivel that’s pretty well hidden and at the knee we get a swivel and a hinge that will go about 90 degrees. The ankles feature a hinge, but it’s very clicky. You basically have a neutral position, one click forward, and two clicks back. And really, all of the hinges are like that including the knees and elbows. It can make it a challenge to stand this guy to not have something more nuanced. There is an ankle rocker that too is a bit on the clicky side. It will move a little, then just jumps to a full tilt, which makes its usefulness limited.

Issues aside, I think the Dark Trooper will move well enough to get it into Dark Trooper poses. It basically just stomps around blasting foes and shrugging off the weapons of others. It’s not much of a melee fighter, because it doesn’t have to be, and when it does get in close it just swats away its prey. It also comes with enough stuff and the only thing missing is a flight stand to better take advantage of the thruster effects. I suppose a blast effect might have been preferred, but oh well. What’s going to determine if you like this figure or not is just how good do you think it looks? And for 25 bucks I don’t think it’s good enough. I didn’t seek out any reviews on this figure before buying it, so silly me for thinking the image on Hasbro’s packaging was indicative of what this figure looked like. Even at the discounted price I got this one at, I don’t think it’s really there. This should be a $12 line, and the fact that it’s double that is crazy and unfortunate as I think Hasbro is going to kill The Vintage Collection with these prices. I don’t hate that I have this figure, but it’s also not something I can whole-heartedly recommend.

If you want to read all of my Star Wars coverage you don’t have much to catch up on, but if you just like laser fodder, I’ve got plenty of reviews of such characters:

Star Wars The Black Series Mandalorian Warrior (Holiday Edition)

We’re getting to Christmas coverage at The Nostalgia Spot one day early this year with this look at one of the latest in the Holiday Collection from Hasbro’s Star Wars line of action figures referred to as The Black Series. I have previously looked at a figure from the very popular streaming show The Mandalorian…

Keep reading

Bucky O’Hare Wave 3.5 Aniverse Storm Toad Trooper

It’s been a long time between releases by Bucky O’Hare license holder Boss Fight Studio. The last figure released by the company was 2018’s Storm Toad Trooper, a figure that arrived at my doorstep on Boxing Day 2018. Since that time, Boss Fight Studio has had sculpts and specs to show off, most notablyBruiser, but…

Keep reading

Star Wars: The Vintage Collection – Din Djarin (The Mandalorian) and The Child

The wholesome content you come here for.

Today we are celebrating ten years of The Nostalgia Spot! It’s not ten years to the day, the actual anniversary was about a week ago, but it’s close enough. In those 10 years, there have been 750 posts here on a variety of subjects, pretty much all of which could be labeled as nostalgic to someone my age. One such topic though has never been broached, and it’s Star Wars. I have nothing against Star Wars and actually consider myself a fan. The first Star Wars film I ever saw was The Empire Strikes Back when my dad was watching a television broadcast of it in the early 90s and beckoned me to watch it with him. I enjoyed it, even though I thought Darth Vader looked like a rip-off of The Shredder, and my dad made sure to rent The Return of the Jedi for me shortly after our viewing. I don’t think I’d see the original film for a year or so though, and that inaugural viewing was a broadcast television airing too.

I thought Star Wars was pretty great though, and while it never really threatened Teenage Mutant Ninja Turtles for number one in my heart, I would eventually become a bigger fan later in the 90s. The special edition of the trilogy was heavily marketed as was the novel Shadows of the Empire. Kenner re-launched its Star Wars action figure line and I dabbled in it. I had versions of all of the main cast, as well as a few vehicles, some Micro Machines, and other assorted toys. I got into the Expanded Universe and read quite a few books during that time and also played the video games. I even unironically enjoyed Masters of Teräs Käsi for the PlayStation and sunk several hours into it. And when the prequel trilogy was announced, I was pretty pumped and my family and I made sure to see The Phantom Menace as soon as we could.

Hasbro knows nostalgia.

Ever since though, my fandom has certainly waned. The prequels turned out be rather poor, and when I moved on from toys I largely left Star Wars behind as well. I never stopped liking the original films, but the fandom certainly became exhausting and I’ve never been able to bring myself to care about the franchise in the way a self-described “fan boy” would. To me, it’s just a fun world and fun collection of movies. I have made no grand plans on how to introduce my own kids to it or anything, I’ll just show it to them when they finally show enough interest to care. And so far, they’re fine with not really interacting with it outside of the Disney Infinity game. On the subject of this blog though, I’ve just never felt like I had anything important to say about Star Wars that hasn’t been said somewhere else. It’s a huge topic with a lot of opinions and you can find Star Wars blogs and YouTube channels in astronomical numbers. Anything I post here would just wind up in an echo chamber. I haven’t been actively avoiding the subject, I just haven’t really found anything worthwhile to say on the subject.

If you don’t like the modern stuff, there’s a Luke to keep you happy.

In celebration of ten years blogging though, it felt fitting to finally tackle something related to Star Wars. And today, we’re looking at a toy! The Star Wars: Vintage Collection from Hasbro is a throwback line of action figures meant to remind collectors of the Kenner days. And since Hasbro owns Kenner now, they can even toss the logo right onto the package! The Kenner line was a 3.75″ scale line, though it might be more accurate to say that was really the height and not the scale as the characters did not scale well with each other. They were also articulated in a simple manner with just five points of articulation: head, shoulders, and legs. It was limited, but not in a manner that stood out for the era as a lot of lines offered little articulation. A Toy Biz X-Men figure, for example, often only had four more additional points of articulation at the elbows and knees. I think the line is actually more memorable for just having some amusing sculpts and oddball characters. The original Luke, based on his appearance in Star Wars, had a massive, barrel, chest on him that looked ridiculous. There were also numerous peg warmers of characters no one wanted as the line went on as long as it could often pulling background characters into the limelight. It was a flawed line of figures to be sure, but I had a lot of fun with it and even still have all of my figures to this day.

And with him, as always…

For The Vintage Collection, Hasbro wisely did not just emulate Kenner. These are not ReAction figures. This is a 3.75″ scale line of figures with modern articulation and a lot of the bells and whistles collectors today are used to. I do not collect anything Star Wars today, but it looks to me like this line works largely in tandem with Hasbro’s The Black Series, a 6″ scale line, with these figures just being scaled-down versions of figures from that line. I do not know if that’s true of every figure, but it certainly appears to be the case with Din Djarin, better known to most as The Mandalorian.

This is awesome.

The Mandalorian has been a big hit for Disney and its streaming service, Disney+, pretty much since day one. The second season just finished at the end of 2020 and a third season is expected later this year along with a spin-off series concerning Boba Fett. Like basically everyone with a Disney+ subscription, I have watched The Mandalorian and I’ve found it pretty damn enjoyable. It’s probably the best Stars Wars thing Disney has done and I think that’s due to it keeping things simple. Some of the episodes get a little too formulaic and feel like video game quests or missions, but for the most part the show is anchored by the relationship between its title character and The Child, a toddler of sorts who bares a strong resemblance to Yoda, hence why many just refer to him as Baby Yoda. The Child was given a name in Season Two, but I’ll refrain from including it here since it’s not printed on the package and because I don’t need to spoil it for anyone. This set features both characters and appears to be partly inspired by the final episode of the first season and is very similar to a set from The Black Series that also includes both. And because Hasbro needs to please all retailers, that Black Series set is exclusive to Target stores while this one comes from Walmart. I don’t know if any of these have actually made it to physical stores as it seems everyone who got one did so via Walmart’s online store where this set was made available as a pre-order (which Walmart cancelled many orders of). I did not get a preorder and was actually hooked-up by a fellow collector whom I met on Twitter via the #CollectorsHelpingCollectors group so a special shout-out and thanks go to Jay (@TMNT_MOTU_RGB)!

He’s got a spot for his rifle.

This set comes packaged on a retro-inspired blister card. The card itself is really attractive and features a shot from the series and a cross-sell on the rear. It looks so nice that I almost hate to open it as this is a classic blister and not something that can be resealed, but this wouldn’t be much of a review if I kept it mint-on-card. Once freed from his plastic confines, Mando stands almost right at that 3.75″ mark coming in a tick over. This makes sense as he appears to be a character of approximately average height for the setting. He’s in his beskar armor and he looks like he’s been in a fight as I think this is modeled on the Season One finale. There’s a nice graphite quality to the beskar with just a hint of a pearl finish on it. Black scuff marks and dirt smudges provide the distressed quality the figure is going for while the rest of the figure is mostly an earthy brown and gray-blue. He’s quite detailed for such a small figure and it’s incredibly rewarding to just sit an admire all of the little touches sculpted into the belt, armor, gloves, and boots. The amount of paint on him is rather impressive as there’s lots of little touches, especially on the belt or the shells strapped to his right calf. And it’s remarkably clean for the most part. The only areas I have some paint slop are the fingers and inside of the glove. The trigger finger of his right hand has some turquoise on it that I don’t think is supposed to be there, and it’s the only paint slop I’d consider an eyesore.

Or if you prefer, a jetpack!

Like the detail work on the sculpt, the articulation is rather impressive for such a small figure. His head is on a ball peg and has great range of motion. He can look up and down and tilt as well as rotate. The cape doesn’t really get in the way too, which is surprising. The shoulders are ball-hinged and he has single-jointed elbows with swivel right above the hinge. Even without a double joint at the elbow, he can still bend his arm a bit past 90 degrees. The wrists swivel and his left hand is a gripping hand while the right is in a trigger position. There’s a ball-joint in the torso with some nice range of motion that affords forward and back bends and plenty of twist and side-to-side action. The bandolier across his chest is loose enough that it doesn’t restrict the torso at all. His legs are on ball hinges which is certainly different. You can get him to kick forward and back as long as you line that hinge up the way you want it to go. This means he can swivel at the top of the thigh, plus he has a thigh cut just above his armor so you can finagle a kicking pose, for example, by spinning the top joint to orient the hinge properly and then twisting the thigh so his leg doesn’t look like it’s been contorted in an impossible fashion. I don’t know why they don’t just use a ball-joint, but this is okay. He has a single hinge in each knee and can swivel below the knee for an effective boot cut. The ankles are hinged and can rotate, but don’t appear to have an ankle rocker of any kind. And really, that’s probably the only thing I miss. An ankle rocker just adds stability for more spread out stances, but this guy stands pretty well and I am just impressed that Hasbro got as much articulation into this one as they did.

The best I could do with the rifle. Note how his jetpack can stand on its own though!
The ever important beskar.

Since this is Mando, he needs to come with some accessories. And obviously, important to him are his weapons and tools. He comes with a blaster holstered at his hip which fits snugly in there, but is also easy to remove. The sculpt on it is quite nice, but the paint is understandably simple. It’s just gray with a brown hilt, but there is a touch of pearl in the finish on the gun metal. He also has his rifle which he can either hold or have pegged into his back. The sculpt of the rifle is great and it’s painted or sculpted in that same graphite gray nearly matching his beskar armor. The stock of the rifle is more of a copper than brown and there’s some gold portions where the scope is fastened to the barrel. It looks rather nice, though there is a couple of spots of missing paint on the stock that I don’t believe I caused when trying to pose him with the rifle. His articulation means he can hold it in a ready position, but struggles to hold it in a firing position, but that’s common for six inch scale figures as well. He also comes with a container that probably has a special name, but I don’t know it. It opens at the front with a hinge and the top can also come off. It’s off-white with a little gray paint and looks like something from Star Wars. It’s mostly here to store his stash of beskar. He has a single brick he can hold in his left hand and a molded stack of bricks to put in this container. It might sound stupid, but even this little, plastic, brick is sculpted rather well as it even has the Galactic Empire insignia stamped into it. The finish is the same graphite color as his armor. He also comes with his jet pack, and it’s done in the same graphite color. I’m not sure if this is painted or just the plastic used, but it’s nice. It pegs into his back just fine too.

A canister, some space metal, and a kid.
“I love you, little buddy.”

Of course, there is one other accessory and it’s The Child, or Baby Yoda, whatever you refer to him as. He’s in scale with his much taller buddy meaning he stands at just three quarters of an inch. He is tiny, and yet somehow he’s just as cute as he is on television. The face is perfect and his eyes are a shiny black so they really capture the eyes of the actual character. There’s a little paint in his ears, but otherwise he’s kept pretty simple. His robe is two-toned and has some nice sculpted details in it. Best of all, he’s articulated which the Black Series two-pack can’t even boast. His head is on a ball-joint and it can rotate all around. He can look up and down slightly, but the way the robe is sculpted won’t allow much. That’s the only disappointment since he can’t really look up at Mando. The arms are ball-jointed too so he can raise his arms out to the side a bit and rotate forward and back. I don’t think his hands can move, but they look like they could be pegged in. Maybe they were strengthened with glue. He is beyond fantastic as far as I am concerned though. Somehow, Hasbro got more personality into this tiny chunk of plastic than some of the much larger versions of the character I’ve seen out there. The only downside is he lacks his little, floating, bubble (pram?) stroller of a device which would look nice beside Mando. He’s also so small that he basically can’t have his little steel shifter-top from the show.

What’s in the box?!
SHIT!

And one last thing! Mando also has an alternate head. If you prefer your Mandalorian unmasked you can pop the helmeted head off and replace it with this unmasked version. Once again, I am left floored by this figure as the likeness to actor Pedro Pascall on this tiny, piece of plastic is better than a lot of the larger scaled figures out there. It’s also a far better solution than the Black Series which made the helmet fit over the head thereby smooshing the nose of the actor and leading to a slightly imperfect fit. I can’t imagine ever displaying him with his unmasked head, but it’s nice to have the option. It’s also worth noting that this head features no battle damage as one may have expected given the rest of the figure. And I suppose now is as good a time as any to mention that his cape is removable. One you have popped off the head, simply slide it off, if you desire. It’s well positioned though so as not to interfere with the jetpack slot or the rifle slot so I doubt most will want to remove it. Plus, everyone looks cooler with cape!

He’s so small that it’s hard to get a camera to focus on his face.

If you can’t tell already, I am in love with this release. It’s the best Hasbro figure I’ve ever owned. It makes me want to check out more from the Vintage Collection, though presently I am not after any other characters. Instead, maybe I’ll just quietly hope my son or daughter falls in love with Star Wars and wants to start a collection of these or something. I definitely don’t feel the need to acquire other characters based on The Mandalorian, at least not the characters who originated in the show. I can think of one character from the Season Two finale that might tempt me, but otherwise I think I’m all set. We’ll see. Time has a tendency to make fools of us all. For now, I have this awesome set of figures that I’m really excited to find a home for in my house. I don’t know where they’ll be displayed, but it will be somewhere prominent, I suspect. This set is being sold by Walmart and is presently sold out, but considering how popular these characters are I expect a restock is underway. There may even be a reissue that omits the battle damage and is distributed to other retailers, so if you missed out don’t despair just yet. And if you’re not interested in The Child, there are single card editions of just The Mandalorian available. It also should go without saying though, if you’re a fan of the show or a Star Wars collector you absolutely do not want to miss this!

I feel like we should end this on a comparison shot, just in case I didn’t properly convey how small this figure is. Left to right: Lightning Collection Green Ranger, Mando, Funko Scrooge, NECA Leonardo