Tag Archives: boss fight studio

Boss Fight Studio Dead-Eye Duck and Holiday Bucky

IMG_2231Wave 2 of Boss Fight Studio’s Bucky O’Hare line is now shipping to consumers and comic shops across the US. Wave 1 was extremely well received nabbing a few Toy of the Year awards and earning the approval of yours truly right here at The Nostalgia Spot. Wave 1 was pretty hotly anticipated among Bucky O’Hare fans since it was the inaugural wave in a  new line of action figures and because it contained the long-awaited First Mate Jenny action figure – a character we were denied back in the Hasbro days. Wave 2, which consists of Stealth Bucky, Astral Projection Jenny, and Dead-Eye Duck is perhaps just as much anticipated because Dead-Eye has long been a fan-favorite. The four-armed former pirate and current gunner on the Righteous Indignation, was brought to life by Scott McNeil for the cartoon with a ton of moxie and a bad ass attitude – traits always endearing to young boys. Also shipping is the special Holiday Bucky, an Easter variant of the Wave 1 figure presented as a chocolate bunny, though not as literal chocolate.

IMG_2221Wave 2 still runs approximately $35 per figure, a steep price for a single 4″ figure, and thus why this review is only for Dead-Eye and the holiday variant. I’m not a professional reviewer and my blog is hardly large enough to attract enough attention to the point where I can receive review copies of toys, so I had to take a pass on the Wave 1 variants and just stick to Dead-Eye. When it came to the Holiday Bucky, I was just too charmed by the packaging and concept to resist. For the time being, I’ve opted to keep Easter Bucky in his packaging, even though it’s fairly easy to remove the figures and reassemble the packaging thanks to an ingenious design that just clips the blister to the card stock. As a result, I’m not going to go into much detail for him. He’s the same figure as before, just with a different paint application. I consider the Easter themed packaging to be part of the appeal and I just think he displays better in box.

With Dead-Eye though, I am taking no such precautions. Dead-Eye is a wonderfully fun design and he demands to be opened and played with. His colors are toon and comic accurate being a pale orange with red straps. The straps are a separate piece of plastic and are glued in place giving him some nice definition. He comes with four guns, though typically he would only wield two at a time in the comic/show, but four arms practically demands four guns, plus the old Hasbro toy came with four as well (sadly, my old Dead-Eye has been lost to time so no comparisons). He has a pair of additional beak attachments to change up his face, and four additional hands including one with a piece of chalk for tallying his kills from the seat of his canon. He has the same articulation as Bucky, with the joints able to pop off and on making the chances of breaking him quite limited. Of course, the additional arms technically means he has more articulation and each shoulder is connected by a ball and socket joint. His range of motion with all four arms is excellent, and his over-sized webbed feat make posing him a breeze.

Basically my only complaint with Wave 1 was how hard it was to swap Bucky’s parts, though I had no such difficulty with Jenny. Dead-Eye shares some of those traits with Bucky, and in some areas he’s better. Dead-Eye arrived with some pretty stiff joints all around. His shoulders moved fine in the socket, but the hinge piece in there and as well as in the elbow were pretty stubborn. Working him gently alleviated some of this, but I’ll probably need to hit him with a hair dryer if I really want to loosen things ups. His hands are also pretty stubborn and do not like popping out. They’re small pieces and getting a grip on them can ware out your thumbs pretty fast. Getting them in is harder than getting them out, and to get them flush you’ll probably need hot water or the aforementioned blow dryer. Thankfully, his beak attachments are a breeze, popping off and on with minimal effort, but not so minimal that you need to fear them falling off. His default expression has gritted teeth on either side and he comes with a second bill that has a wider grin on the right side and a third bill that’s completely closed. Since his whole face doesn’t come off his eye will always be in kind of a frown, but I’ve honestly never seen Dead-Eye with any other expression.

Size-wise, Dead-Eye is pretty much the same height as Bucky which is accurate to both forms of media. This means he’s a little shorter than Jenny and the trio look great posed with each other. It’s hard not to look at them and imagine what future versions of Blinky, Willy, Bruiser and so on will look like beside them. Like the other two, his packaging also is an homage to the Hasbro toy with the same artwork on the front just changed slightly. A character bio from creator Larry Hama appears on the back as well as a silhouette of the Toad Storm Trooper to follow in Wave 3, which is supposed to arrive before the end of the year. In addition to the Trooper, a stealth variant of Dead-Eye is expected as well. There’s also to be a special Corsair Canard version of Dead-Eye, which was the group of pirates he belonged to before the events of the comic/show, that is being packaged with a tin lunchbox. There also is a toon variant of Bucky, which appears to be the same as Wave 1 Bucky but with maybe a brighter red plastic, that I believe is also part of Wave 3. Boss Fight Studio is a small company, and Bucky O’Hare a niche product so forgive me if I’ve said this before, but variants are needed and will probably continue in order to make the line profitable and hopefully able to continue. Boss Fight has yet to show anything for a potential Wave 4, so your guess is as good as mine on what will be included, but hopefully it happens.

IMG_2232Dead-Eye Duck is a welcomed addition to the Bucky O’Hare line and the most appropriate choice for a third figure due to his fun design and popularity with the fanbase. He’s just as good, if not better, than the figures that preceded him. His anatomy makes his facial expressions less imaginative, but he makes up for it with easy to swap face pieces without the troubling stubbornness exhibited by the Wave 1 Bucky. And Holiday Bucky is a silly and fun variant for the line. Really, a chocolate Easter Bucky design? I would have never thought of it. Both Dead-Eye and Holiday Bucky, who is limited to 400 pieces, are available at http://www.bossfightshop.com along with the other figures from Wave 2 and the Wave 1 figures. Being a small shop, don’t expect Boss Fight to dispatch your order right away should you choose to make a purchase since they’re probably consumed with fulfilling the pre-orders right now, but they’ll come. I can’t say enough good things about this line of action figures, or about how happy it makes me to see Bucky and the gang relevant again, so if yo’ve been sitting on the sidelines maybe now is a good time to jump in!


Boss Fight Studio’s Bucky O’Hare and First Mate Jenny Action Figures

IMG_1874For the better part of three decades, Bucky O’Hare has been largely absent from the public conscious. His television show lasted a mere 13 episodes, likely green-lit thanks to the popularity of other obscure comic turned television sensation the Teenage Mutant Ninja Turtles. His toy line consisted of one wave of 10 figures and two vehicles and no more. Why did Bucky fail? There are a few theories, but the most prevailing is that Hasbro mishandled the toy line packing too many unpopular figures into a case (specifically Toad Air Marshall) at the expense of the most popular characters like Bucky, Dead Eye, and Bruiser. And I can certainly vouch for that to a point, as I only bought a Toad Air Marshall as a kid when he was literally the only character on the pegs. And it wasn’t that the section had been picked over leaving a handful of figures, no it was dozens of Toad Air Marshall action figures. When I got my first Bucky I had to sift through a bunch of them to find him and was elated. I eventually had the whole set, plus the vehicles, though sadly they would be either sold in a yard sale or discarded entirely. I would replace my Bucky many years later as an adult collector, but never the rest of the set.

IMG_1865

91 Bucky with his 2017 counterpart. Finally, we’re rid of that molded oxygen mask from the original toy.

Enter Boss Fight Studio, an upstart toy developer out of Massachusetts that has mostly dabbled in mythological beings for its action figures. Bucky O’Hare is the company’s first go with a license and they’ve already done better than the last company to try. Over a decade ago, Shocker Toys acquired the Bucky O’Hare license for a line of Bucky Shockini toys, which were basically a variation of the Mini Mates line that was really popular at the time. They showed off completed prototypes for four figures:  Bucky, Jenny, Dead Eye, and a Toad Storm Trooper. They were never released and the company is gone. I don’t know why they weren’t released as I remember posting about it on their message board back then and the post was ignored, then deleted. It could have been they had a bad reception and the company backed out. Maybe they only had the license for a year and weren’t able to get the product to retail before it expired? Maybe they just plain ran out of money?  Whatever the reason, it was another obstacle for Bucky O’Hare, who had recently failed to land a new tv deal after Neal Adams attempted to sell a brief CG pilot, and it was possible the franchise would never be heard from again.

Truth be told, not much has changed since then for Bucky O’Hare. This license acquisition by Boss Fight Studio came out of no where. I’ve done my best with this little blog to keep Bucky some-what relevant. I’ve talked about his NES game, the arcade game, and the show itself before while also hyping these figures. 90’s nostalgia is pretty hot right now and lots of properties are being revived so maybe Boss Fight Studio was just looking to score a piece of that and one that probably wouldn’t cost a ton. And someone at the company must obviously remember the property and enjoy it because an obscure property like Bucky O’Hare isn’t getting a toy line without someone who loved it driving that. And I’m happy to report that these two inaugural figures have turned out about as well as they could.

IMG_1864For the debut of the line, Boss Fight Studio settled on Captain Bucky O’Hare himself and First Mate Jenny. The selections may seem obvious, after all, who is going to launch a Bucky O’Hare toy line with out Bucky O’Hare, but Boss Fight Studio deserves some recognition for pairing him with Jenny. Jenny was infamously dropped from the Hasbro line because of the concern of marketing a girl toy to boys. She was supposed to be included in the planned second series, and since she was basically prepared for the first set, completed figures made it through production and into packaging. Some of these would find their way into the hands of collectors, most did not, and Jenny remains the biggest omission from that lone set of figures. Finally, Bucky O’Hare fans have the Jenny figure they were denied back in 1991.

The figures in this line appear to be in a standard 6″ scale similar to the Marvel Legends line by Hasbro. This means Bucky is around 4″ tall, not including his ears, and Jenny about 4.5″. They’re very similar to the scale from the original toy line, though with better and more accurate proportions. Those old toys tended to have over-sized heads and squished bodies. They were fine for their era, but obviously not adequate for an adult toy line. The packaging for both is almost identical to the old Hasbro packaging, only BFS utilizes a re-sealable blister. Character bios and images of upcoming figures are on the back and really do a great job of taking advantage of the nostalgia fans likely have for the old figures.

Bucky and Jenny are both loaded with articulation. Bucky uses a lot of colored plastic which works to make his red spacesuit pop but not overwhelm. The minimal amounts of paint utilized are all nice and clean. There’s no weird fraying plastic or evidence of the molds, even on the small switchable hands. He has a rubbery cape that is removable via a peg, and the shoulder pads are a separate piece as opposed to being molded to his arms, same for his belt. Bucky has two additional face plates, one with a smiling open mouth and the other a more relaxed open mouth. He has twin pistols and the pegs on his belt still function as holsters, a call-back to the original design for Bucky (they always envisioned toys) and the Hasbro Bucky. The pistols are more in scale this time around too and look great. The negative with Bucky, and even BFS noted it on via their Facebook page, is that his removable pieces are all really tough to manipulate. I can’t get the additional face plates to seat properly on his head, and the hands won’t come off. When I try to pull them off his arm ends up popping off at the elbow. His cape also doesn’t fit all the way into the peg hole on his back so it’s prone to falling off. The cape is not that big of an issue, since he’ll be hanging on a shelf eventually, but it’s discouraging. BFS recommends using a hair dryer or hot water to warm the pieces in order to separate them, but I have yet to try because I’m a little skittish of such tactics.

IMG_1871Jenny is in some ways the more anticipated of the two because of her history. She does not disappoint. She’s nice and shiny and packed with articulation like Bucky. She’s got a huge mount of hair on her head, as she did in both comics and TV, and an abundance of curves. If this property had been more popular we’d probably be partly blaming Jenny for the rise of furries. Her arms and lower legs are really thin, but she doesn’t seem particularly fragile or anything. Her hands are easily swapped out with the extras provided by BFS, and she also has two additional face plates, one of which being a cheeky winking face. She doesn’t have a gun, despite carrying one in the animated series, but has two hands with “psychic energy” resembling Marvel’s Psylocke and two circular energy blasts she can hold. She has four sets of hands as a result, compared with Bucky’s three, and four face plates. Her default features an open mouth, but she also has a smiling one and a toothy smile in addition to the winking face mentioned before. Her hair is obviously quite heavy, but her tail makes posing her rather easy. She’s a bit limited in what she can do as a result, but still looks great. There are some slight paint imperfections on a few of her face plates as she requires finer details, but nothing major.

Overall, these figures are great and any Bucky O’Hare fan will likely be very happy with them. There is an elephant in the room though that does dampen some enthusiasm I have for the line and that’s the price. Bucky and Jenny both retail for $35 a piece. Add in tax and shipping and you’re looking at roughly $80 for a pair of 4.5″ action figures. Bucky O’Hare fans starved for merchandise will likely suck it up and buy a set, but the price point makes it very hard for Boss Fight Studio to attract casual collectors. Some-what troublesome is the amount of variants announced already. There’s a stealth Bucky and astral projection Jenny on the way which are just repaints of these two figures. Dead Eye has been announced as well along with a variant for him too. There’s even a second Bucky variant that’s all brown to resemble a chocolate bunny, he’s an Easter release. Boss Fight Studio has also shown off a Toad Storm Trooper. Coincidentally, they’re following the planned Shocker release with their first four figures. If the line is going to need to sell variants in order to survive then that’s probably not a good sign. I know I’m personally not in the market for repaints at this price point. I want to support the line because I really want to see it continue, but I can’t justify buying an Easter Bucky for $35. I will definitely be placing an order for Dead Eye and the Storm Trooper when they become available because both look amazing.

Because of the pricing structure and the fact that Bucky O’Hare has been such an unsuccessful and niche franchise, it’s hard to be optimistic for this line. I don’t want to end this on a down-note though. I think these two figures are great and they’re already among my most favorite of any line I’ve ever collected and I am totally onboard with more characters, be they taken from the comics or cartoon. Boss Fight Studio has already mentioned they’re eager to do an Al Negator, which is important to know because was a cartoon-only character so that probably opens the door for other toon-only characters like Bruiser and Mimi. If you’re a fan of Bucky, or just remember the cartoon and want to reminisce, these are great action figures to add to your collection. They’re really fun character designs with a lot of personality and Boss Fight Studio did an impeccable job in bringing them to life. Hopefully, we can keep Bucky from disappearing again.