It might be hard for the young folk to believe, but once upon a time movies based on comic book characters were treated like box office poison. Unless you were Superman or Batman, you just didn’t belong in cinema. Even those characters weren’t bulletproof. Superman had a nice run, but fizzled out with the fourth flick while Batman basically did the same in the 90s. Still, 1989’s Batman was a massive hit in all of the ways Hollywood dreams up. It not only did well at the box office, but it was a cultural phenomenon with a hit soundtrack, tons of merch, and home video sales to back it up. Because it did so well, studios started to look at Batman as the blueprint for what could work in movie theaters when it came to comic book characters. If you couldn’t fit a franchise into that mold, then why bother? That’s probably why Spider-Man could never get off the ground despite someone always holding the option to start a film franchise. It’s also probably why a little known comic book hero in Blade did manage to sneak into theaters and actually do fairly well. And it meant that when it came time to bring the X-Men to film that franchise needed a dash of Batman.
This mainly manifested in the film’s look. Audiences weren’t going to believe a bunch of people in blue and yellow spandex could save the world. They’d look stupid, so out with the colors and in with the black. Almost all black, and since the film ended up being a hit I guess the lesson to take from X-Men was that approach worked, but was it the only way? When we finally made it to the now Marvel Cinematic Universe there seemed to be a willingness to just take the costumes people liked in print and just go with it. The Fantastic Four film franchise isn’t celebrated as a massive hit these days, but it made money with blue spandex. Spider-Man wore his traditional costume and faired well, so when Marvel got to Iron Man they basically let him do the same. Along with Captain America and, to some extent, Thor. Fox’s X-Men franchise still tiptoed around the subject, but eventually some of those comic blues made it in, but one thing we never got was Wolverine with the mask, with the yellow (or brown, for that matter), until a little movie called Deadpool & Wolverine.
I didn’t do a review of Deadpool & Wolverine here. I probably should have, though it would have been lost in the many other reviews of the same. If I were to summarize it briefly, I’d call it Fan Service: The Marvel Way. It was plenty fun, maybe a little too long, but an overall enjoyable movie-going experience. It sure seemed like a big reason for the movie to exist was just to get Hugh Jackman’s Wolverine into a movie with a proper Deadpool (not that abomination from the Wolverine movie) and in a costume more reflective of his comic book self. Mission accomplished. The only surprise was that Hasbro wasn’t at the ready with Marvel Legends figures at opening. Now, I suspect there’s a good reason for that. Marvel and Disney probably wanted to keep the whole Wolverine look under wraps for as long as possible, at least until that first big trailer, and in doing so froze out action figure makers. They need a long lead time to get product on shelves and it probably wasn’t doable. They did manage a filler wave of older releases to try and placate fans, but now we finally have the first go at proper Deadpool & Wolverine figures and today we’re looking at Wolverine.
Wolverine stands at approximately 6.5″ to the top of his noggin and comes clad in that bright yellow and blue suit you’ve likely seen by now. By default, he’s sporting his cowl which is interesting because this figure depicts a version of the character unseen on the screen. That’s because he has his yellow sleeves. If you’ve seen the movie, and I suppose light spoilers if you have not, then you know he begins the movie with the yellow sleeves, but eventually discards them. Before doing so, we never see him with the mask on. That’s saved for a big reveal later. He could have worn the mask at any time so I guess this figure is sort of like a depiction of the character before we ever meet him when his life was presumably better. And had Hasbro withheld the masked portrait people would have likely complained. They’re complaining anyway, but we’ll get to that.
What stands out with this figure right away is holy yellow, Batman! Or Wolverine. The yellow is very bright, though not necessarily inaccurately so when compared with the film. It’s just that in the film Wolverine acquires a fair amount of grime pretty quickly which this figure does not reflect. The yellow is also bare plastic which gives it a cheap look. Yellow is a tough color to sell and it would not surprise me if a lot of would-be customizers out there give this guy a wash to dampen that effect. There is a lot of blue on the costume as well which is mostly painted on. It’s fairly clean and Hasbro also painted the little, silver, rivets on the front of the costume which is a nice touch (they’re unpainted on the back, a fairly common tactic utilized by Hasbro). The X emblem on the belt looks nice and there’s black mixed in with the blue on the gloves and boots. The yellow is also all textured so it’s not a smooth figure. It almost has a sandpaper feel to it.
There are good and bad things to be found with this sculpt. The somewhat cheap look is one of those bad things and another would be the almost frumpy look Wolverine has. If you’ve seen Hugh Jackman in the role, then frumpy is probably one of the last words one would use to describe Jackman’s Wolverine. We see a lot of these issues with the comic Legends figures, but it’s largely a matter of proportioning. His chest is very narrow and there isn’t much thickness to it either. It doesn’t taper in like a human’s torso (or superhero’s) should and the head is too big. The legs seem short and he’s got these wide, birthing, hips. Now, this is all an issue when you have the figure just standing straight up and down on your shelf. Widen his stance and the issue is mitigated, but there’s no hiding completely that this body shape is off. And that’s a shame, because I bet we’re going to see most of this figure again at some point in the future. The other noticeable blemish that shows up more in pictures than in-hand is the different shades of yellow. The torso is almost a pale yellow while the limbs are more vibrant. The torso feels a touch harder and it’s thinner which may be the cause of the discoloration because both are cast in yellow as opposed to painted.
What undeniably turned out well though are the portraits. Well, specifically one portrait, but the masked portrait is solid too. It’s a good likeness of Jackman in the mask from the film which, honestly, looks a little goofy, but this is what we wanted, damn it! The yellow paint on the bridge of the nose is a little dingy, but that’s what happens when you paint yellow over black. The facial hair is a little messy too and there’s some overlap of the flesh on the edges of the jaw opening. It will look okay on a shelf, but up close isn’t all that impressive. And that’s assuming you want to display Wolverine masked and I’m not sure many will because this Jackman alternate portrait is fantastic. I don’t know if any other company at any other price range is going to top this likeness. It’s uncanny how lifelike this looks. Sure, get up real close and you see that almost pixelated paint app that’s a result of the face printing Hasbro uses, but at half an arm’s length it’s going to look awesome. The paint for the beard will probably vary a little from figure to figure and there’s a missed spot near my figure’s right ear, but overall I am very happy with this portrait. It’s the main reason why I decided to get the figure since the import versions look like they won’t even have a Jackman portrait.
Accessories with Marvel Legends are rarely a selling point these days. Aside from the stellar unmasked head, this figure just comes with a set of clawed fists, a non-clawed right fist, and a trigger finger left hand. He has no gun to shoot so I guess Wade will have to loan him one. The clawed hands are probably what most care about and they’re fine. Claws are fairly straight and look good. The yellow paint on the hands is a little like the yellow paint on the nose, but what are you going to do? My hands did have some excess yellow paint in places, but I got it off with a Magic Eraser sheet. Obviously, the big omission here is the lack of optional arm parts. I mentioned earlier how we only see Wolverine in the film with bare arms while wearing the mask and that was certainly needed here. Was Hasbro not aware of that detail when the figure was designed? It’s possible. Or, they looked at all of this unique tooling they had to do in order to create this figure and decided a double-dip was in order. They can re-release this figure, throw in some arms that may not even need to be tooled, and call it a day. Maybe we’ll get a new head or something. An angry masked head, a yelling non-masked (which they could also repurpose from another figure), or maybe just this figure with bare arms. Personally, the bare armed look is the one I like best. Wolverine just looks weird in sleeves, like he’s wearing pajamas. Because it feels like such a certainty, I definitely don’t blame anyone willing to play the waiting game.
Wolverine’ articulation is a little different from what we’re used to. The head is a double ball peg and while it’s not executed perfectly, it is better than most Hasbro double ball pegs as Wolverine can look up, down, and there’s some tilt at play. He doesn’t have a neck joint though so those low Wolverine crouches aren’t really in play. The shoulder joints are basically big ball pegs. It’s what a lot of import companies use, but they do it in tandem with other joints to create more range. This one doesn’t. There’s a black, floating, cap and some space cut out of the chest to get a little range going across the chest, but it’s minimal. There’s almost no range going back so I wouldn’t even consider this a butterfly joint of any kind. Perhaps worse is that the shoulder pads just peg onto the shoulder itself. And it’s a big old peg with no play which means the shoulder pads are static and will hinder range at the hinge. He can’t raise his arms out to the side a full 90 degrees and even rotation is a bit cumbersome. The bicep, double-jointed elbows, and wrists are fine. The trigger finger hand has a horizontal hinge which is mostly worthless.
The torso features an old school ab crunch. It goes back basically one “click” and forward two clicks. There’s a little nuance in between clicks, but not much. It’s very limited and the lack of a ball joint there is unfortunate. The waist twist is just a waist twist. The belt is floating so it can get out of the way. The hips are big ball sockets. He can almost hit a split and kick forward about 90 degrees with no room going back. There’s a thigh twist, but it breaks up the pattern on his thighs which is one of those things that may bug me more than most. The double-jointed knees work as expected as do the ankle hinges and rockers. The gloves and boots appear to both be separate pieces, but there’s no rotation to them. Overall, I’d call the articulation mediocre to average. Wolverine not being able to rear back with a fist is pretty disappointing and I don’t know why they let the shoulder pads become such a problem. I’m guessing there was a reluctance to break up the sculpt in the chest, but I personally would have done so for a ball-jointed diaphragm joint as well as a neck joint. I guess we’ll have to look to another company if we want a super-articulated Wolverine.
Hasbro’s first stab at Wolverine from Deadpool & Wolverine is a bit of a half-baked release. It’s lacking in accessories including a major one and doesn’t hit a homerun with the articulation. It’s sacrificing articulation for sculpt, but the sculpt isn’t exactly deserving of such reverence. It does however deliver an incredible likeness of Hugh Jackman in the form of the unmasked portrait. Even with the limited articulation, it’s still possible to pose away some of the sculpt’s shortcomings. Because fans have been waiting so long to see Jackman in such a costume, it feels a little bit like this is a figure from a company that knows the fans were going to eat it up no matter what. And as a result, they only managed to deliver a satisfactory product. Hey, I’m clearly part of the problem in this instance since I bought this even though I really wanted a version of the character sans sleeves. And I fully expect such a character to come out in 2025. Knowing it’s likely to happen makes this a hard recommend. If you just want an MCU Wolverine right now and the imperfections don’t bother you then I guess go for it. I think the future S.H.Figuarts Wolverine will be a better action figure, but it too appears to lack a set of bare arms and I don’t think it’s even coming with an unmasked head. Plus it costs more than triple the amount of this one so I guess what I’m saying is I understand anyone who decides that this is good enough for now. I clearly did and while I’m not entirely satisfied with the decision, I’m not exactly regretting it either. Maybe I will when and if I replace it with something better, but who knows when that will be? At least for right now I get to enjoy tiny Hugh on my desk.
Do you like Wolverine? Do you like Deadpool? Well, I’ve got some other stuff you can check out:
Marvel Legends X-Men Animated Series Wolverine
The toyline of my dreams was announced last October. In celebration of the 30th anniversary of the television series X-Men, Hasbro is doing a dedicated line of Marvel Legends with figures based on the look of the show. The show was obviously inspired by the designs of Jim Lee, but there are differences in the…
Keep reading
Marvel Legends Deadpool 2 Two-Pack
Look through my various toy reviews and you’ll probably notice that I’m not much of a Marvel guy. That wasn’t always the case for me though as I was huge into Marvel Legends once upon a time. I basically stopped around the time Hasbro was awarded the Marvel license. I felt there was a dip…
Keep reading
Mondo X-Men TAS Wolverine 1/6 Scale SDCC Exclusive Action Figure
When San Diego Comic Con was cancelled for 2021, many of the entities that would have sold exclusive merchandise at the event pivoted to web sales. And since the 2020 iteration of the famed event was also canceled due to the COVID-19 pandemic, many seemed to expect the same for 2021, or the massive delays…
Keep reading
The Nostalgia Spot 
Leave a comment