No, this is not bootleg Spider-Man, this is Web-Man! Who is Web-Man? I actually had no idea until I just looked it up. It would seem Web-Man is a copy of Spider-Man created by Dr. Doom. Not only are his colors inverted from the real thing, but so is most everything else. And since Spidey is basically a genius, Web-Man is quite stupid. As far as I know, he appeared in just one issue in 1977 and has never been heard from again. Though this being a comic book character, it’s entirely possible I’m wrong about that last part as comics have been known to recycle characters here and there. Even obscure ones.
I’ve mentioned in posts before that I used to collect Marvel Legends. And alongside Legends, I also collected the offshoot Spider-Man and X-Men lines produced by Toy Biz and later Hasbro. I stopped though around 2007 and really haven’t looked back aside from a lone Deadpool acquisition last year. So why on Earth am I doing a Web-Man review? It’s kind of a funny thing. I’ve been aware of Hasbro’s retro card releases of the past year or so which seek to emulate the 1994 Toy Biz Spider-Man line. I loved that line as a kid and I had a bunch of those cards (and probably still do) and the figures that were once stuck to them. It definitely tickles my nostalgia bone to see these things in stores, though so far not enough to get me to bite. When it came to Web-Man though, I just loved the colors. He’s this light shade of blue juxtaposed with a very bright red. It’s not the true inverse of Spider-Man, who trends darker typically, but there is something so aesthetically pleasing to me about this color combo. I loved it the moment I saw it in product shots online, but not enough to buy it. That is, until, Amazon just happened to have the thing in stock and I grabbed one. I did want to add at least one Spider-Man to my collection because I snagged a Pulse exclusive Venom over the weekend (he has yet to ship), and now I have one. Sort of.
Being that I haven’t purchased a Spider-Man figure in quite some time, this figure is probably a bit more exciting for me than it is for longtime Legends collectors. I think the last Spider-Man I bought was Iron Spider-Man, which I think was released by Hasbro, but was one of the last figures Toy Biz was working on when it was dissolved. I’d dig it out if it was easily accessible (I might have even sold it) to compare, but other than that my last Spidey might have been the Marvel Legends Series 6 First Appearance Spider-Man. Either way, this is quite different. Now, my understanding is this Web-Man uses the same body as Hasbro’s Spider-Man 2099. I was actually a little surprised when I got him because I had just assumed this was a repaint of the classic Spider-Man released on the retro card. That one was pretty well-received, from what I understand, and ended up being hard to track down because everyone and their mother apparently wanted at least two: one to play and one to keep mint-on-card. The main difference between this body and that one is a diaphragm joint which takes the place of the waist twist on this one. There are pros and cons to each, one major pro of the other Spidey is that he can crouch down into a 3-point stance, but it’s more of an interesting observation for me than anything. I just assumed that all Spider-Men would be produced on that body going forward.
As mentioned before, this guy comes on a retro card back which looks lovely. He has a one sentence bio on the back with no cross-sell below. The card itself is thicker than the old ones and the blister is attached in a different way. It would have been awesome to see Hasbro invest in resealable blisters, but they also appear to be trying to phase plastic out of their packaging as much as possible (and that’s a good thing). Once extracted, Web-Man stands at about 6 1/4″ when placed on a flat surface. Immediately, my eyes are drawn to this guy. That blue is just beautiful and it contrasts so well against the bright red. The black web-lining is bold and striking and just serves as a reminder that this is one of the best designs of all-time. Superman, Batman, Captain America – all take a backseat to the classic Spider-Man design. I love the shape of the eyes which remind me of Ditko’s Spider-Man, but bigger. The webs on the mask form a little pentagon in-between the eyes and it’s so clean looking. The reference art I found on the guy doesn’t feature that detail, but I don’t care. I like the look of it. His head is a bit more square than most Spider-Man sculpts I’ve seen, but it’s not something I mind. The color matching between the blue, plastic, head and the blue paint on the torso is pretty well done. If anything, the head is just ever so slightly darker, but I don’t think most will notice it unless they’re putting this figure under intense scrutiny, which I am.
The torso is a little more of a mixed-bag, but certainly not a disaster. Web lines are hard, and with this figure I would say it passes the eye test when on a shelf. When right in front there are a few blemishes. The outer, black, line on the right hip is a little off on mine and there’s a little bit of blue paint over the center line right around the belly button. The right pectoral also has some blue slop and it’s probably the ugliest error on the front of the figure as the black webbing doesn’t extend to the outer line as a result. Up by his left trap is some missing paint resulting in a red line that’s distracting. It’s right on a seem where the plastic was fused together and if I was confident in my ability to match this paint I’d probably cover it. The back of the figure also features some messy spots along the edge, and he has an awful hole in his back. I don’t think Hasbro still uses those old peg stands, but I could be wrong. I’m guessing this hole was needed for Spider-Man 2099’s cape or something. It is an unfortunate eye sore though, as are the pins in his arms. If ever a character cried out for pin-less engineering in the arms, it’s Spider-Man, because you’re always going to run into this with his classic (and inverted) costume where you can only match the outer or inner color of the arm. Hasbro always opts to match the outer arm, which is the right move, but it means the inner arm has a circle of color that shouldn’t be there. In this case, it’s blue above and below the elbows. At least with the knees it’s not an issue. It would be nice if they just put a dab of paint there, but this is Hasbro and they’re quite focused on making low cost figures which is why their figures often are priced lower than everyone else.
Aside from the blemishes here and there, I do really like the look of this figure. This is a solid sculpt for a Spider-Man adjacent character. The only sculpting issue I have is that his shoulders are really small. Hasbro likes to almost recess them in the torso which just gives them an odd look. It’s really only noticeable in vanilla poses, but given this is a Spider-Man, you’re not likely to pose him in such a manner on your shelf. The musculature looks good otherwise as this is a lean dude and I like that he seems to have a unique spider logo on his chest. He’s just a very pleasing figure to look at, all in all.
Now when it comes a Spider-Man figure articulation is going to be super important. This figure may lack the updated configuration of the new Spider-Man body, but he’s no slouch in the articulation department. For starters, his head sits on a ball-hinge. This gives him very good up and down range, but little tilt. At the shoulders we have a butterfly joint that works very nicely. The inner pieces are painted though, so hopefully paint rub doesn’t become a major issue over time. For now, it seems okay. The shoulders are on standard ball-hinges and you do get that mismatch color issue here too as the hinge is blue plastic so he has a stripe of color in his armpit that shouldn’t be. Like the pins, this is just a trade-off on where to put the offending color and Hasbro did the best it could. And in this case, if they had tried painting over it the paint would likely just flake off rather quickly. The weird way they sculpt the shoulders does make it difficult to get his arms horizontal, but you can get close. There’s a biceps swivel past that and double-jointed elbows which bend past 90, but not much past. I was a little surprised with that part. At the wrists are swivels and hinges which might be a little gummy out of the box. At least mine were. In the torso we have an ab crunch and Web-Man can crunch forward pretty far and back a little bit, but without any ugly gapping issues. There’s a waist twist below that and the legs are on ball-pegs. He can kick forward rather well and almost do a split. There’s a thigh cut past there and double-jointed knees. We also get a boot cut and hinges at the ankles to go along with excellent pivot action.
Really, the only complaint I have with the articulation is the inability to get the figure into a classic, Spider-Man, three-point stance. Aside from that, he moves well and I didn’t have any stuck joints on my figure. Almost better, there are no loose joints either as everything is nice and tight. He’s a lot of fun to mess around with and probably would be even more fun with an action stand or some web effects. Sadly, he’s rather light on the accessory front, a common thing with Marvel Legends. He comes with fisted hands in the package that can be swapped with web-slinging hands or wall-crawling ones. They’re pretty standard Spider-Man hands, though he lacks gripping ones so even if you make your own web he won’t be able to grab them. It’s certainly decent, but does beg the question would collectors be happy to spend another buck or two to get more stuff? I’m used to buying NECA and Super7 figures which retail for a lot more than Legends so it’s probably no surprise where I come in on that question, but Hasbro exclusive collectors are definitely more price sensitive from what I’ve seen.
Web-Man is what I wanted him to be. I saw a design that looked really pleasing to me and the finished product didn’t disappoint. Yes, I can pick over this thing and find little blemishes and imperfections here and there, but that’s true of pretty much any mass market retail action figure. Especially one with as demanding a paint job as Web-Man. It definitely would be preferable to find a vast assortment of these guys at retail rather purchase online sight unseen. That way you can hopefully find the one with the least amount of imperfections. This is admittedly an odd figure to have as the lone Spider-Man representation so to kind of make up for that I’ve pre-ordered the upcoming black costume Spidey. Even so, I love how this guy looks and it doesn’t bother me at all that I don’t have a traditional Spider-Man figure right now. Maybe when Hasbro eventually does a pinless one I’ll bite, but for now this is great. If you’re like me and you find yourself just drawn to this color scheme then this one’s for you.