Tag Archives: teenage mutant ninja turtles magazine

NECA TMNT Garfello

Before they teamed up with the likes of Batman and the Mighty Morphin Power Rangers, the Teenage Mutant Ninja Turtles had an encounter with an orange cat with a love for Italian food. I am speaking of none other than Garfield, the Jim Davis creation who was everywhere in the 1980s. The two franchises came together for a one page comic in the pages of Teenage Mutant Ninja Turtles Magazine in 1992 in which Garfield, disguised as fellow ninja turtle Garfello, tries to dupe the turtles into letting him guard their precious pizza while they go do crime-fighting stuff only for Odie to blow his cover when he can’t get his turtle costume on right. The comic was written by Garfield creator Jim Davis with inks by TMNT co-creator Peter Laird. Art was handled by Gary Barker and Larry Fentz with color by Steve Lavigne and letters by Mary Kelleher. This little comic was apparently popular enough to attract the attention of not one, but two toy companies 23 years later. It was at San Diego Comic Con in 2025 that NECA unveiled their take on Garfello with Odie along as well. The reveal was perhaps the highlight of NECA’s booth for the convention and something that seemed to attract a lot of attention online. Shortly after, Boss Fight Studio (who has a whole line of Garfield action figures) revealed its own Garfello and Odie two-pack that is so similar to what NECA showed that I honestly felt bad for them. Did Garfield rights owner Paramount even alert either toy company to the plans each had? Most licensors won’t greenlight the same thing across licensees because they would just be competing with each other, but evidently Paramount wasn’t too concerned. Both sets look fine from a sculpting standpoint, but the NECA approach of painting all of the little details and the fact that I’m well into their TMNT collection sold that set for me, but I’m guessing those who already have Boss Fight’s Garfield figures would opt for that version.

“We can be ninjas Odie. How hard can it be?”

NECA’s take on Garfello is sold as an “ultimate” release with new box art by Jason Yang. It features all TMNT branding putting it squarely in the turtle toy line. The figures inside are based on sculpts by Tomasz Rozejowski and Kushwara Studios with paints by Geoff Trapp and Mike Puzzo. Even though it’s an ultimate style release, the price tag is a bit elevated which could have something to do with the dual license or perhaps the lack of reuse potential contained within. Or at least that seems to be the case everywhere but Target who prices the set at $38. Many specialty shops are $45 and up which is a bit of a tough sell for such small figures. Is there even enough in the box to make consumers happy at $38? We’ll try to answer that one today.

The two smallest turtles around.

Garfello stands at a miniscule 2.75″ to the top of his head and right around the 3″ mark to the tip of his ears. He’s a little guy, but he’s also a house cat and meant to be in-scale with the turtles. Just which turtles is a legitimate question as the ones from the one-shot are kind of their own thing. Stylistically, they probably most resemble the Jim Lawson turtles, but with colored bandanas. They even look a little like the recently made Stan Sakai turtles, but it’s funny that my memory of the brief comic seems to always insert the Archie turtles into the page and only viewing the actual source gets them out. There’s only one group shot in the comic which puts Garfield at a little past the mid-thigh point of the turtles which does make the figure scale best with the Lawson turtles. With the toon, he’s closer to the belt area, but I think the scale is close enough that he’ll work for whatever turtles you prefer to place him with. And since this is Garfello as opposed to Garfield, he is clad in his turtle costume which is non-removable. The black bandana is part of the sculpt and he features a belt, plastron, and shell. He’s also sporting brown elbow and knee pads and his belt has a big “G” in the middle of it as that was the style at the time.

The shell continuity between the two is pretty nice.

The sculpt for Garfello is quite good and on-model for the comic. The head has that oval shape to it and the eyes dominate the space available on the front. The ears are situated close together and the black markings of the fur are visible from all angles. NECA did take some liberties with the design as they included the little pieces of fur that are often found sticking up and out from the sides of Garfield’s head, something the comic omitted. Here they’re coming out of the bandana which is a little odd, but honestly feels right and I was actually surprised to see that detail wasn’t present on the page. The figure has a very matte appearance as everything is painted over. There’s black linework throughout the shell and plastron which really helps to capture that comic style and helps give the figure a striking appearance. Perhaps the best part of the paint job is reserved for Garfello’s lone weapon: the pizza cutter! It features a brown handle and real working cutter wheel (not sharp, likely terrible for cutting actual pizza) that’s painted a combination of white, blue, and black. The blue helps to give it that comic shading which we see often in NECA’s comic figures while the black lines add detail and create the illusion of a whirling pizza cutter. Painting metal objects as they appear in comic books is honestly one of NECA’s biggest strengths and it really puts to shame other companies that go with just one color or swirly plastic.

“Is there a prettier sight?”

The majority of Garfello’s accessories are reserved for altering his expression or hands. The comic is brief which allowed NECA to literally recreate every expression Garfello is responsible for in five of the six panels. The only one he can’t do is his final, disgraced, posed where he’s smushed on the road and glaring at Odie – a pose the figure had no prayer of recreating so why bother with a portrait of the same? The three heads are smiling, smiling with teeth exposed, and smiling with the ears flattened. To swap between the three are three sets of eyes: half-lidded, open, and open with tiny pupils. You can find all three in the comic so it’s hard to argue that anything is missing, even if it would have been fun to get an open-mouthed expression for devouring pizza. To remove the eyes, NECA included a little, plastic, tool that resembles a railroad spike or flooring clete. You can use it to push the eyes out from behind, or just carefully use a fingernail from the front. The pegs that hold them in place are pretty short so they’re fairly easy to remove and replace. For hands, Garfello has a set of fists, gripping, open, and open with claws. They too have fairly short pegs which makes taking them off and on fairly painless. The only danger is that his arms are so short that it’s a little tricky getting leverage, but not impossible. Heads are a little more stubborn, but there’s just a big old ball joint under them so there’s not much risk in damaging anything when removing or seating one. The bandana tails are shared between all three portraits so it’s a good idea to remove that part first. If you do get into any trouble then just turn to some hot water and that will likely cure what ails you. To complete the look, NECA included a stack of pizzas for Garfello to drool over. They have a nice, messy, gooey, quality that makes them appear both delicious and gross. Seriosuly, who removes their pizza from the box to stack like this?

“Stand back, Odie. I don’t want you to see what I’m about to do.”

The other accessory of sorts is Odie himself. Unlike Garfield, Odie can appear on your shelf as his costumed version or just as a garden variety Odie as NECA included two portraits. By default, he’s just Odie with a closed mouth portrait that looks pretty cute. He’s just a tick over 2″ to the top of his head with the ears bringing him to about 2.75″. If you remove that head you can swap it with Odie’s turtle costume which is just a shell with his tongue sticking out of the neck hole. It’s a bit tough to get on, but the figure is pretty sturdy. As always, use heat if it’s being stubborn. Odie’s head connects via a double ball peg so it’s not quite as durable as Garfello’s connection, but hardly weak. Paint for Odie follows the same style as Garfello with lots of linework, especially on the shell head. His soft yellow fur does seem to be a magnet for dirt as he came out of the box looking slightly dingey when viewed up close. Mine also has a black dot on the lower part of the right eye that’s a bit annoying. He looks like Odie though with the only caveat being that I tend to always picture Odie in my head with his mouth open and tongue hanging out. He never actually appears unmasked in the comic so it’s hard to quibble with what is essentially a bonus head. I suspect other Garfield fans will be more disappointed in the fact that Odie can appear as just regular Odie while Garfield is forever in his Garfello attire. There would have been no easy way to make him a two-way figure. It would have been cool if NECA had devised a way to do so, but since we’re already dealing with a full-priced offering I don’t think I’d have wanted to spend more just to make Garfield be able to take the costume off. Especially since I would be unlikely to ever do so.

“Oh, the heck with it – I’ll just use my claws.”

Garfello and Odie are little guys. They’re also NECA figures so it’s a given the articulation is going to be underwhelming with the pair and that much is true. Garfello is articulated at the head, shoulders, elbows, wrists, hips, knees, and ankles which includes both a hinge and a rocker. As I mentioned before, the head is just a big ball socket so it rotates and has a minimal amount of tilt. The shoulders, elbows, knees, wrists, and ankles are standard hinged-peg joints. They’re small, so they have a delicate feel to them and range is fairly limited. The gripping hands do not have a vertical hinge which would have actually served the pizza cutter accessory far better than the standard horizontal hinge. The ankles were tight on mine at the hinge, but other joints were fine. His tail is also articulated, but it just swivels and is best served as a third leg to help balance the figure. The hips are the oddest part as I think they’re just ball-socket connections, but they appear to connect to a ball-pin that’s angled down as opposed to a standard horizontal angle. This limited the movement at the hips to mostly a swivel, a shame if you want your Garfello to kick Odie in the butt for messing up his plan. As for Odie, he has the double ball-jointed head while each leg barely moves. I think they’re all ball joints with the rear legs having slightly more range than the front. The feet feature hinges and rockers which really only exist to get his feet flat on the ground. That’s all Odie is capable of and I’m honestly surprised they didn’t trim the budget and just make his body static. He’s basically articulated just for the sake of saying that he is articulated. Functionally, it’s mostly useless.

“Bon appetit”

Likely no one was buying these figures for their posing ability. It doesn’t meant we can’t expect a little better, but if you just want a silly looking Garfield and Odie for your TMNT display then this will get the job done. The only real question is how much is that worth for you? On a purely value level, I don’t think this set is equivalent to a typical NECA ultimate release. It would have been awesome as a $30 item, but this is a world in which Super7 and Mezco are charging over $20 for figures with five points of articulation. Garfello is like a step up from such and I do wonder how I would have reacted if he was by himself for $30? Would I consider that a good deal? If so, doesn’t that make Odie worth the extra $8? That’s, of course, if you can find him for $38 at Target. NECA did offer Garfello on their website, but with a steep shipping cost. Big Bad Toy Store is charging $47 for this release which does feel steep and I can’t fault the person who looks at that price and decides to pass. This is a novelty figure and the price for that novelty is going to vary from person to person. For what it is, it’s pretty nice. The sculpts are on-model and the paint is great. I’m guessing if you’re a big Garfield fan that this set makes you wish NECA was doing more Garfield if it’s going to look this good. Unless you’re looking at the price tag and feeling thankful your toy budget doesn’t need to make room for more stuff.

I don’t have any other Garfield toys to link to below, but I do have some other stuff:

Dec. 5 – A Garfield Christmas

This year, I’m bringing back a feature from last year where I take another look at, what I consider to be, the greatest Christmas specials ever made. I explained my reasoning for doing this in prior posts, but in short, the first time I looked at some of these specials I did just a short…

Keep reading

Dec. 20 – The Garfield Show – “Caroling Capers”

Back in the 1980s, Garfield was pretty damn popular. His presence was pervasive in pop culture, so much so that younger people today would probably be surprised. He originated as a comic strip by Jim Davis, but his popularity grew enough to pave the way for some prime time animation specials. These proved popular, and…

Keep reading

NECA Mirage Studios Teenage Mutant Ninja Turtles 4-Pack

When it comes to the popularity of Teenage Mutant Ninja Turtles a lot of the credit goes to Playmates Toys. Kevin Eastman and Peter Laird created the characters born out of a joke. Credit them for having the vision to think this joke had appeal beyond their small circle as they self-published Teenage Mutant Ninja…

Keep reading