Last summer, fans of Dragon Ball were treated to a new movie: Dragon Ball Super: Super Hero. The intended purpose of the movie seemed to be to take two somewhat forgotten characters in Piccolo and Gohan and give them a makeover. The manga and anime Dragon Ball Super has basically been a story about Goku and Vegeta gaining power and fighting off the bad guys of the universe. Every other prior hero has essentially been knocked down not just a peg, but several. That’s not exactly a surprise as Dragon Ball has pretty much always operated like that with Goku gaining a rival and then leaving said rival in the dust. Really, only Vegeta has managed to hang around and even he’s usually clearly the second best, but after the events of Super Hero there just may be a new strongest in the universe: Gohan.
Ever since his debut, Gohan has always been the character with the potential to be the strongest fighter in the universe. It’s just his main character trait, and the one that distinguishes him most from his father, is that he doesn’t desire to be the strongest. He doesn’t even like fighting. For him, it’s a means to an end. Originally, Dragon Ball Z was to end with Gohan stepping up and essentially taking over for his dad as the savior of Earth. Economics being what they are, series creator Akira Toriyama was convinced to continue on with his manga and Goku was reestablished as the best of the best. Some fans have always hated what became of Gohan following the Cell saga, but for me, that was always Gohan’s logical progression. With no danger present to force him to keep up, he was going to slip back into his lifestyle and pursue his passion of being a scholar. Ever since the series came back as Dragon Ball Super, Gohan has had to go back and forth between his pursuits as a scholar (and now husband and father) and the universe needing him. After getting smoked by a resurrected Frieza, he’s convinced he needs to at least keep up with his training to some degree and it pays off in the final chapter of the anime, but we don’t really know what he’s up to in the manga as that has (predictably) focused on Goku and Vegeta.
Not to spoil a year old movie, but Goku and Vegeta aren’t around in Super Hero forcing Piccolo and Gohan to defend the Earth against a new threat. And that threat is one that’s possibly even more powerful than our favorite Saiyan duo. We’ll talk about Piccolo’s journey in a month or so, but for Gohan his power-up is what is now called Gohan Beast. In a scene that’s nearly a 1:1 recreation of Gohan’s Super Saiyan 2 transformation, Gohan is able to tap into a new level of power that basically mimics that of Super Saiyan 2, only his hair is even longer, silver, and his cracking energy is red instead of blue. His eyes go red as well making this a more primal take on the Super Saiyan look. It remains to be seen how Toriyama explains this in the manga (if he even does, though I consider that unlikely), but my interpretation is this is the new form Gohan vowed to achieve in Super. A form of his own creation, and perhaps it’s something born from him being mixed race. Either way, it’s more than enough to win the day and Gohan’s new form just may mean he’s the new strongest in the universe.
Gohan Beast was going to be a major want from fans of Bandai’s action figure line, so it was hardly a surprise to see him go up for sale via the Premium Bandai website. Actually, I suppose I’m a little surprised this wasn’t a general release, but Bandai could always revisit it after the manga debut. Maybe without battle damage or something. The figure itself is very similar to the Ultimate Gohan Super Hero released a year ago, but also more different than I expected. It comes in the standard window box packaging with gold backdrop and was manufactured in China.
Gohan Beast stands at around 5.5″ to the top of his face making him basically the same as the previous Gohan figure. He’s still in his purple gi with boxy, brown, shoes only now there’s battle damage throughout in the form of hash lines sculpted in and some torn parts in the pants and top. The arms, crotch, and feet are pretty much the only parts repurposed from the older figure as the battle damage necessitated some new sculpting. The main difference is with the torso where Bandai opted to replace the sculpted-on gi with a rubbery overlay. This is true of the torso overlay and the sleeves which appear to peg-in somewhere inside the body. I’ll have more to say about it in the articulation, but from a presentation standpoint it’s an improvement as it allows the chest to be sculpted plastic and removes the challenge of painting it to match the sculpted color of the neck. The faces all look fantastic in keeping with what Bandai has been doing for the past year or so with its face printing and the hair is really well sculpted. It’s super spiky and a bit unpleasant to handle as a result. There isn’t really any shading on it though which is a bummer, especially for a “premium” release. The only thing I don’t care for when it comes to the presentation are the sideburns which are separate from the hair. They’re just a touch darker than the hair and the seam line is a bit annoying. There’s not much that could be done about it though unless they could have made them part of the hair, but maybe that would have looked worse or proven too delicate.
As for paint, it’s mostly kept to the face. The wristbands are painted and the flesh in the torn pieces on Gohan’s pants had to be painted as well. The color used for those bits is probably just a touch darker than the sculpted flesh tone, but it’s not particularly noticeable since there’s plenty of clothing separating them. The red sash around the waist appears to have a paint wash applied to it and the front of the pants look like they’ve been hit with a matte clear coat. It’s especially noticeable near the cuffs of the pants as the factory didn’t quite hit the whole area leaving the sides of the pants shiny by comparison. The matte finish at least matches the top of the gi and I would say that, overall, this version of Gohan presents rather well. Especially if you like the look of this form.
Where things get iffy with this figure is with the articulation. The addition of an overlay for the top is going to cause some issues, and for some, the presentation trade-off Bandai made might not be for everyone. The head is on a double ball peg allowing for rotation and tilt. The hair prevents the figure from looking up, and the head gets some range looking down. There’s a ball joint in the base of the neck which, when used in conjunction with the joint at the head, allows Gohan to look down quite a bit, and you get a little range looking up, but not enough for a straight-ahead flying pose. The shoulders are on a hinged ball peg which is connected via another ball peg inside the shoulder affixed to a butterfly joint. This lets the shoulder move up and down and forward and back, but the range forward and back is quite limited. The hinge in its default, high, position won’t allow Gohan to raise his arms out to the side in a full, horizontal, position, but if you slide the shoulder down first then you should be able to achieve that. The issue preventing a lot of range is the cuff of the gi which is done in a rubbery material and is connected to the body basically in between the shoulder and butterfly joint. At any rate, it’s not a floating piece like it was with Super Hero Gohan. I suppose one could separate it by carefully slicing it with a blade, but it’s unfortunate collectors need to cut up their figure to get the range of motion they’re accustomed to. And I don’t know if this piece would float properly if one were to do that, it might just slide down the arm and require further modification.
After the shoulder, there’s the usual biceps swivel and double-jointed elbow. The hands are connected via ball pegs and work fine. In the torso, there may be a ball joint of some kind in the diaphragm, but again, the overly is going to get in the way. If it’s there then it’s basically useless, and I only even suspect it’s there because Bandai basically always includes such a joint and I think I can see one when pulling back on the shirt. There’s a ball joint at the waist and that’s where you’ll get your rotation and tilt, but there’s little in the way of forward or rear “crunch” in the abdominal area. The legs are the exact same as Super Hero Gohan, so the range there is as expected and the only limitations are with the ankles as a result of the more boxy shoe design.
It’s a bummer to see the shoulders and abdomen so restricted here with Gohan. The prior Gohan released had a fully sculpted gi so there’s an ab joint that works fine. The only eyesore associated with that is the cut across the gi and the fact that Bandai had to match paint to plastic when it painted the bare portion of the figure’s chest. The overlay approach is unquestionably the more aesthetically pleasing way to do it, but is that upgrade enough to warrant a reduction in articulation? In my opinion, the answer is an emphatic “No.” I expect this to be a highly articulated line and I want that extra range. I don’t care about the visual joint, because at the end of the day this is an action figure and action figures have joints on them. It’s fine. I suspect though this was done as much as a cost saving than an improvement. Doing things this way, Bandai doesn’t have to worry about the color of the inner joints for the butterfly mechanism as we so often saw. It may also be easier to assemble and reduce labor costs and it certainly reduces the need for paint hits on characters with this, basic, look. At this stage in the line, I’d like to see the figures getting better at a standard Kamehameha pose, not worse.
The articulation may not be up to par, but Bandai is probably hoping that fans will be happy with the accessory load-out, and for the most part, I think they will be. For faces, we get a pretty standard allotment: stoic, smirk, teeth-gritting, yelling. There is a bonus fifth face plate for Gohan Super Hero that features an angry expression with red-rimmed pupils which I assume is intended to be a pre-transformation expression. It’s done well, but I can’t see many actually displaying that figure with it, it’s almost strictly for those who like to photograph their figures. For hands, we also get a pretty standard allotment: fists, open, clenching, martial arts posed, and a two-finger right hand. That’s basically all Gohan calls for as you have hands for the Masenko, Kamehameha, and the two finger posed hand can be used for the Special Beam Canon he apparently taught himself.
To go with that usual assortment, we get one extra display piece and an effect part. Gohan Beast gets a crossed-arms piece which I suppose could be used with Super Hero Gohan as well. I don’t know how well it works with Gohan Beast though as I can’t get his arms to come apart at the bicep where it’s supposed to. I think this is a byproduct of these arms not really being intended to be utilized in such a manner originally as every other figure I’ve had with one of these pieces has come apart easily. When I try to tug on the arm, the whole butterfly joint tends to slide and I’m afraid the arm will come detached from within the torso before it comes apart at the bicep. The pieces are small, but even when I manage to get a good grip on a shoulder and start working the bicep it shows no sign of loosening. I wasn’t planning on displaying the figure with that piece on so I’m not going to force it, but it sucks when a figure can’t really use an accessory like this.
The last accessory is a Special Beam Canon blast effect. It’s likely an acrylic piece done in translucent blue plastic. There’s a touch of white paint at the tip and it looks pretty good, but there may be some cloudy portions in the sculpt (I have one right in the middle). The spiral effect is a separate piece and it’s glued into the “missile” portion of the blast and back by the fingers. There’s a two finger posed hand sculpted onto it as well which had to be painted to match the figure. It’s not perfect, as painting acrylic to match is certainly not easy, but it’s not so off that it’s likely to discourage folks from using it. There is also a stand included that pegs into the end of the blast because otherwise this would be too heavy for the figure to properly wield. The bigger question with it concerns that hand piece as I’m not convinced they needed to sculpt the hand onto it. It creates problems because acrylic is not as forgiving as PVC so getting the hand on and off the figure is harder than it needs to be. The first time I tried to remove the part, it wouldn’t come off and the peg going into the figure’s forearm came loose before the peg in the hand. It’s also a delicate piece and my spiral part has already separated from the main blast back by the hand. It doesn’t really change the look of the piece, but I can also see people accidentally cracking this thing or snapping it trying to get it on and off. The shoulder range being so limited also prevents the figure from being able to grasp a bicep or forearm with the left hand, as Gohan might do when firing this blast. Even the post on the front of the box is proving really hard to duplicate.
For collectors of this line looking for a good representation of Gohan’s new power-up from the movie this figure gets the job done. It just doesn’t earn an A. It’s more like a B- as the frustrations I ran into swapping some of the parts and the limited articulation were real bummers. They give the figure a bit of a “janky” quality which is not a way I would describe most S.H.Figuarts releases. I’m used to smooth articulation, good range of motion, and a painless integration process when it comes to the extra stuff. A lot of the issues I experienced with this figure were self-inflicted as the overlay harmed the function and the extra parts could have been done in a different manner as to minimize any issues. Why not have the blast effect just slot into a hand piece rather than make the hand part of it? Or have the fingers slide into the blast? It doesn’t need to be a tight fit, it just needs some stability at that end.
If you are interested in acquiring this version of Gohan then you’re unfortunately going to have to seek it out on the secondary market. This was a Premium Bandai release which is like a made-to-order item and orders closed awhile ago. The figure retailed for $65 and I would guess the aftermarket price is likely close to double that right now. Gohan is a popular character so it’s possible another version sees release at some point, especially as the manga moves into this part of the story. I wouldn’t bank on a re-release though if it’s something you really want.
Did you like Dragon Ball Super: Super Hero and want to check out more figures from the movie?
S.H.Figuarts Dragon Ball Super: Super Hero Gamma 1 and Gamma 2
Last year saw the release of a brand new film in the Dragon Ball franchise: Dragon Ball Super: Super Hero. The mouthful of a title was a bit of a throwback affair. It seemed that Toei and series creator Akira Toriyama wanted to use the film to return the spotlight to Gohan and Piccolo, two…
Keep reading
S.H.Figuarts Dragon Ball Super – Ultimate Gohan Super Hero
As part of the promotion for the film Dragon Ball Super – Super Hero, Bandai released a wave of action figures from its S.H. Figuarts brand of characters from the film. The neat thing was, these releases were actually really cheap relative to other SHF releases with a MSRP of just $35. Of the four,…
Keep reading
S.H.Figuarts Dragon Ball Super Son Goku Super Hero
Back in the early 2000s I was a collector of Irwin Toys’ Dragon Ball Z line of action figures. When I started collecting that line, I just focused on my favorite characters which were primarily Vegeta, Trunks, and Piccolo. Gradually, the collector impulse took over and I started buying entire waves as they came out…
Keep reading
The Nostalgia Spot 
Leave a comment