When NECA launched it’s line of action figures based on Disney’s Gargoyles, it seemed to imply that Demona would be figure number 2. She was not. That honor went to Thailog, the Goliath clone, and that might have had something to do with the many factory delays and shipping woes that were impacting the entire industry. It’s a lot easier to pivot from Goliath to a figure like Thailog at the factory when almost all of the molds are the same. The other promise from NECA was that none of the Gargoyles figures were slated to be sold as exclusives. They were all general release and collectors could expect to be able to preorder them from their preferred retailer. Well, that went out the window with NECA’s Haulathon event which was split between a website for Halloween costumes and Target stores. And as you could probably have guessed at this point, Demona ended up falling into that event.
Demona is the rogue gargoyle from the show. Goliath’s former lover, she’s basically the Magneto of the series as she has a justifiable distrust of humans, but turns that mistrust into all-out hatred. She doesn’t want to live alongside humanity, she wants to crush it. Armed with advanced weaponry, magic, and a wealth of knowledge given her extreme lifespan, she’s a formidable foe for Goliath and company and a worthy third figure in the line. Since she’s not a Goliath repaint, she’s also just the second, unique, sculpt we get to experience. With Goliath and Thailog, I had some nitpicks, but was generally satisfied with the finished product. With Demona, that’s pretty much still true, but she does introduce a new problem that I really hope isn’t one going forward.
Demona is sold in the standard NECA Ultimates five-panel window box. It’s a bit smaller than Goliath’s since Demona is a smaller character. Not only is she shorter than her former beau, she’s more slender as she has a very feminine physique that mixes with the gargoyle anatomy. She has a big tuft of red hair that looks quite nice and the pale blue-gray of her skin lines up well with her appearance in the cartoon. Like Goliath, she’s inspired by the cartoon, but has added detail to make her look a bit more “alive.” It’s a bit less pronounced as she doesn’t need giant, rippling, muscles and it’s mostly seen in the texture added to her clothing. She basically just has a top and loincloth with the bottom piece being separate while the top appears to be part of the mold. Either that, or the torso is cut-out to fit it so it can be glued down. It’s interesting as I suspect NECA will want to reuse much of this mold for Angela at some point, but her top is different. Maybe Disney just didn’t want people sneaking a peek under Demona’s top? Which does raise the question: why do female gargoyles have breasts? They’re an egg-laying species, most of which don’t nurse their young, but they are fantastic beasts so I guess they can follow different rules.
Demona has a very striking appearance, and one thing I rather like is that NECA used actual metal hoops for her earrings and her anklet. This could potentially make her more fragile, but they seem secure and fine. Her proportions look nice, and like Goliath, her wings are painted in a two-tone fashion with a purple shade used for the membrane. Also like Goliath, the wings are huge and made of ABS so there’s no give to them. They’re going to take up a lot space, and there’s nothing that can be done about it. Aside from that general complaint, my only other issue with her is that her face looks just a little off. I feel like her face should be longer and more narrow. Instead, it starts off rather wide and quickly comes to a point at her chin giving her a slightly scrunched appearance. It’s not terrible or anything, but I think she could look a little better.
Demona comes with more stuff than we’re used to, and she even has a new feature that I wish Goliath had. And that feature is she uses faceplates instead of swapping an entire head. Bandai has been doing this for years with its figures, and I’m surprised it took NECA this long as it would have been easy to do with Goliath. Her face pops off easily and she has a screaming, red-eyed, face to go in its place. It’s appropriately unsettling, so much so that I almost don’t like looking at it, but it definitely works. Demona also has various hands including open, clawing hands, fists, a trigger-finger right hand, and a modified gripping left hand for her book or gun. She has two, giant, guns. One is a bazooka while the other is some kind of laser canon. The bazooka has a trigger and a more conventional design that’s easy to get the character to grip, while the other gun is more cumbersome with no actual trigger. I’m assuming it appeared that way in the show so I’m not faulting the toy here, just pointing it out for review. She also has her Grimorum Arcanorum which is really cool. It’s well-sculpted and the paint looks awesome as it has this distressed look to it and it can even open. It’s also sculpted to have a page torn out and that missing page will come with a future figure – a nice attention to detail.
The accessories are certainly appropriate, and the only thing missing is what’s missing from all of the figures so far and that’s a flight stand and additional wings. The wide open wings are essentially gliding wings so a flight stand is almost a necessity, but obviously would add cost to the figure. I’d happily take an increased cost if it meant alternate wings though. I know I sound like a broken record, but these things are too much to manage now that we have three figures.
Demona may be smaller than Goliath, but she essentially articulates the same. The head is on a double ball-peg, but her hair keeps her from being able to look up which is unfortunate for flying poses. NECA could have fixed that with either a second hairpiece or with a hinge in it, but chose not to. She can look down, tilt, and swivel. There’s no lower neck joint and her shoulders are ball-hinges. She can raise her arms out to the side without much trouble and has a biceps swivel, double elbows, and wrists that swivel and hinge. All of the hinges are horizontal, which is unfortunate for the trigger hand. Demona has a ball joint in the torso below her bust and a waist twist below that. Her hips are the standard ball joints and she can kick forward and back, since she doesn’t technically have an ass. There’s a twist there as well and she has single-jointed knees since the gargoyle anatomy only requires that much. The ankles are hinged and can rock a bit with another hinge at the toe that also has a rocker. The tail pegs into the rear of the figure and is bendy plus there’s a hinge at the peg. At the wings, she has hinges and they’re on pegs so they can rotate up and down and also swing out.
It’s with the wings that a new problem emerges for Demona. In many respects, I think she articulates better than Goliath as there’s less bulk to maneuver around, but what kills her is the tolerance of the wing joints. They are far too loose and are downright floppy. Her wings immediately slump to the table and posing them on their own is impossible. I’ve had to prop them up on Goliath and Thailog or just let them hit the shelf to pose her. She’s a challenge to stand, so I guess the wings help in that regard, but it’s a problem and it seems to be rather widespread. I’m going to have to try to remedy this somehow, either with super glue, tape, or something that can be added to that peg to tighten things up. It’s a problem that the figure really can’t have since the wings are so huge and it’s something NECA needs to tighten up now. I’ve refrained on trying to remedy it for the time being so that my images with this review are true to what the figure is out of the box.
Demona is a figure that is largely as expected. She looks the part well enough and has essentially the same articulation as Goliath, just with a new problem in the form of the wings. If not for that, I think I’d find her a little more entertaining than Goliath, but instead I find this figure to be rather frustrating as I try to pose it on my shelf. That’s also true of the other releases in this line as they’re so cumbersome that they’re really not a lot of fun to handle. They look pretty great when placed in a pose that looks nice, but they make you work to get there. NECA plans to include extra wings with the non-winged characters in the line, but that’s not going to do it. We really need options right out of the box, or else I think a lot of people will drop this line after a figure or two. Maybe I’m wrong, but despite this figure being overall a solid release, I’m finding my enthusiasm for this line waning which is hard to believe given how excited I was a year ago when the line was announced.
Demona was part of the Haulathon event and some stores are still receiving stock of her and she should set you back around $36. The distribution appeared poor to start, with some stores only getting one unit or none at all, but Target did make her available online so hopefully those who wanted her got her. I never found this figure in stores, so a special shout-out to @JoePoppingOn who helped me in tracking her down and the next figure in the line. The figure is also now up at various online retailers, some with a mark-up so it pays to shop around. Those figures are presently slated for a June release so hopefully that holds true and everyone who wants it can get one.
May 5th, 2022 at 12:08 pm
[…] a gimmicky collector event taking place at Target that should be over by now. Unlike his line-mate, Demona, Bronx appears to have shipped in rather large numbers. Also unlike Demona, he was never put up for […]
September 1st, 2022 at 4:41 am
The laser cannon’s front hole fits the trigger finger okay, with the thumb going in the hole behind it, but it doesn’t stay super well. I think that’s the intended way though.
I think the major issue with the wing pose they’ve chosen for everyone is that the wing-arms are being held at a perfect goal-post 90-degree angle.. which would be fine, if the wings’ fingers were pointing downward, as in the standard ‘resting’ pose we typically see gargoyles in (like the Bat-signal). but it looks a bit wrong for gliding (at least Demona’s can lower without painfully overlapping in back. mine don’t slump (yet?) but it’s easy for the wing joint to crack, I hope that didn’t happen on yours and weaken it). The main thing this wing pose is good for is being swept up in intimidation, which is a silly default pose… a more Bat-signaly pose would at least be suitable for a ‘dive’ gliding.
LikeLiked by 1 person