I wasn’t going to do a post on this particular figure, but there probably is some curiosity about it and how it works with the Hasbro Power Rangers Lightning Collection, so here we are. Last year, I fulfilled an almost lifelong ambition and acquired a Bandai dino Megazord from 1993 based on its appearance in the Mighty Morphin Power Rangers television show. The toyline was white hot in the early 90s, and it was something I had to make due without as a kid (and for the record, I did just fine, so don’t weap for my childhood). It turns out, the kids of 2020 also enjoy Megazords from the 90s and my own children spent a fair amount of time playing with it, assembling it and disassembling it enough that I went to eBay and grabbed them some Power Rangers from the same era to play with. When Christmas came around, it made sense for my son to ask Santa for a Megazord he could call his own, and the big man delivered.
It was late last summer, or early fall, that Hasbro rolled out its own version of the classic Bandai toy. The zords were scattered across three blister pack releases that could be purchased at big box retailers and online at various toy and hobby websites. What was most attractive about the set was that it was really affordable. Each release retailed for $15 so kids, and collectors, could assemble a Megazord for a mere $45. I’m pretty sure it cost more in 1993 dollars to do the same. Of course, this meant the release was compromised compared with past iterations. The zords probably lost about 25-30% of their size and are primarily assembled with colored plastic with little or no paint. On the plus side, there were no stickers to place as the decals came on the toys, though they still appear to be as prone to peeling and such as stickers applied by the consumer.
As mentioned already, Hasbro chose to distribute these dino zords across three releases. The mastodon and pterodactyl come bundled together as do the triceratops and saber-toothed tiger. The tyrannosaurus, being the largest of the five zords, comes solo, but Hasbro did toss in the power sword so it wouldn’t feel so lonely. I’m not sure why Hasbro opted to do things this way rather than simply sell it as one, complete, set. They probably could have even jacked the price up another five dollars and sold it at 50 bucks. It’s just unlikely anyone would want just one set and not all three, because lets face it, most kids don’t want to play with the individual zords. All this does is make it a little harder to find everything you need. Thankfully, the zords weren’t terribly difficult to track down, but I know in my frequent trips to Target I rarely saw all three sets readily available, it was usually just one or two
These toys aren’t technically in the Lightning Collection, but are in that lesser line Hasbro mostly markets to kids. All that means is that these aren’t technically being marketed to collectors, though I’d wager most of the people buying stuff based on the Mighty Morphin era are folks my age. The engineering on all of the zords is very similar to the Bandai originals as Hasbro has largely preserved the transformation as it appeared on television. The sheer amount of plastic utilized though has been significantly scaled back. It can be seen in the tail of the T-Rex zord which has a lot of chunks just cut out of it and the rear of the mastodon which is fairly open. It’s definitely not a set as attractive as the old ones, though there are areas where things have been improved slightly. The T-Rex, for instance, has its mouth canons sculpted in now and they look pretty nice. Some of the joints are also tighter, specifically the tails of the triceratops and saber-toothed tiger, though I’m also comparing a relatively new toy to one almost 30 years old. Given time, maybe they’ll be just as loose.
Where this set comes up short though is just in the details. The wheels on the saber-toothed tiger, for example, aren’t painted black and are just sculpted gray like the rest of the legs. The canon at the tip of the triceratops tail doesn’t articulate so it looks pretty lame, plus it doesn’t have actual wheels to roll on. I also miss the chrome details some of the old figures had, though I mostly miss it on the Megazord’s power sword. It’s just unpainted plastic with some of the design sculpted on just one side of the blade. It’s very bland and is the aspect of this release I see the most complaints about. Hasbro also utilized a new peg system for the legs of the Megazord which works fine, but it also means the T-Rex now has red pegs jutting out from its knees. I also dislike the head of the T-Rex and how it snaps in place with the Megazord head contained underneath. It doesn’t seem to want to actually snap and it just feels very cheap. The “horns” on the Megazord itself can slide all the way to one side and just seems junky, even though it does, in the end, get the job done.
Playing with the zords on their own doesn’t seem like a great experience, based on how my kids interact with it. Thankfully, combining them is fairly easy even for a kid. The legs take a bit of effort to seat properly, and the pterodactyl can be a bit finicky, but it goes together largely in the same manner as before. I actually like how securely the mastodon clips on with this release, though I hate how easily the legs of the mastodon pop off. The tail of the T-Rex also no longer has a joint towards the end of it so it sticks up more pronounced than before and isn’t particularly pleasing to the eye, but it’s not a big deal. You can also still do tank mode, but it’s just as janky as before and more of a novelty than a fun way to play.
Once together, the Megazord does very much look the part. Once again, we’re missing some of the details of past releases, but it’s certainly far from an ugly thing. The face is where some extra paint would have really been welcomed as that vintage Bandai release just looks sharp. And, of course, the sword sucks, but I already mentioned that. What is better than before though is the articulation. The classic Megazord can’t do much of anything, but this one at least has some joints. The arms can rotate and raise out to the side a bit and the Megazord now has elbows! It can bend them about 90 degrees and also swivel too. At the legs, it can kick forward and back still, but it also can fan its legs out slightly for a wider, more natural, stance. The legs also swivel there as well. There are no knee hinges, unfortunately, but you can swivel the lower legs at the knee pegs. The only thing missing that really should be here is a head swivel. It just seems like that would have been a very easy and cheap thing to include that would have really added some personality to the poses available because even a kid wants to put this somewhere prominent in his or her room when it isn’t being played with.
Obviously, this thing doesn’t scale at all with the figures in the Lightning Collection. Even the original doesn’t and in order to scale properly it would likely need to be six feet tall. It’s big enough at around 9″ tall though that I think it can be a reasonable centerpiece in your MMPR display. And if you’re ambitious, you could paint this thing up into something a bit more special. Hasbro sculpted most of the details one would expect, it just didn’t bother to paint them. As a toy, it seems pretty neat, to me. Admittedly though, my kids haven’t played with this much since Christmas and my daughter even told me she wants to play with my Megazord, not this one. Go figure. I think she just likes the sheer size of the original one, and as easy as it is to transform this one, it’s a bit easier for her to transform the original. Mostly I think it’s just a case of her being more familiar with that one and not wanting to take the time to get to know this new one.
If you’re a Lightning Collection fan that wants a Megazord, this is certainly an affordable option. It’s not a collector grade release though and that shows. Even with light play, some of the decals are already starting to peel on this one and that’s disappointing. It’s possible the same will happen for those who just set it on a shelf and forget it. The biggest thing this release has going for it is obviously the price and availability. A Bandai one from 93 will probably set you back a couple hundred dollars, while the Legacy Collection release is a bit cheaper, but also not as nice as the original and it suffers from a lot of the same shortcomings as this one. And then there’s the Soul of Chogokin Megazord which I think retailed for something like $350 and is no longer in production so it’s likely to cost even more than that now. This set is for kids and casual fans that need a Megazord, but don’t want to break the bank. I’ve seen this one getting dumped on a bit by collectors, but at $45, I think it’s pretty good. I definitely wouldn’t recommend displaying it in dino mode as the individual zords aren’t terrific looking, but who would do that anyway? As long as your expectations are reasonable, I think this will please most who buy it.
If you are a collector looking to add a Megazord to your collection, you will soon have some more options. If you just want a posable Megazord, Super7 recently announced that it has gained the Power Rangers license. The company has already shown some vinyl, minimally, articulated Megazords, but it will be doing zords in its Ultimates! line and I can only assume a proper Megazord will arrive at some point. They’re doing the tyrannosaurs first though, and I don’t think they can do a combining Megazord so it figures to be a stand-alone zord. I could be wrong, but time will tell. Grabbing this Hasbro one at $45 doesn’t feel like a tremendous risk to me, but if you can wait, maybe hold out to see what’s coming.
Leave a Reply