When Glenn Danzig and Jerry Only reached a settlement over who owned the rights to The Misfits in the mid 90s (resolution: they both did), it set off a wave of new merchandise plus a new version of the band. What had once been a logo found mostly at punk and metal shows, the visage of the Crimson Ghost began showing up at malls all across the country. And not just on t-shirts, but shoelaces, lunchboxes, and even light switch covers. Within the anti-establishment culture of punk rock, this type of merchandizing could be seen as selling out. “Sell out” was the dirty name artists didn’t want to hear coming from its fanbase, but it almost always followed when a small act jumped from an indie label to a major one and started putting its name on everything and anything. Old fans mocked and looked down on the new ones, but usually the money would keep on rolling in so it’s hard to say if any of this licensing actually hurt a band’s reputation.
As a teenager, I would fall into those traps and look down on the “Newfits” fans with their American Psycho t-shirts and Jerry Only dolls. Not that it bothered me to buy a Misfits shirt with Glenn Danzig’s evilive logo in the fine print or a skull-printed wallet. I was applying a double standard at the time, one I can freely admit to now because as one gets older they tend to care less and less about that stuff. A guy’s gotta eat, and if your fanbase wants shoelaces and light switch covers with your band on it then why not give it to them? For a price, of course. And today, The Original Misfits is now a cash a cow for Danzig and Only. They can sell out a few large venues each year, play for a couple of hours, and laugh all the way to the bank until they’re ready to do it again. By not doing full tours, they even get to avoid waring out their welcome. I get the impression that once (if?) the well starts to run dry and these Misfits shows can’t support a large venue anymore then they’ll stop and I don’t begrudge them that at all.
Because of my one-time avoidance and outright disdain for anything Misfits-related released by Jerry Only’s Cyclopian Music, I never acquired much in the way of toys and such baring the likeness of the band’s mascot: the Crimson Ghost. Or is it The Fiend? Or, as Danzig referred to it, simply the Misfits Ghost? Only goes with The Fiend, and I guess neither uses the character’s original name of The Crimson Ghost for legal reasons, even though there’s likely little chance of a lawsuit at this point. The character is from an old film serial shot in black and white, hence why it’s often shown as a black-robed skeleton, though in reality the robe was crimson and the face was more of a blue. I’m not sure if it was blue for stylistic reasons, or just to get it to show better on film. Regardless, most fans of the band were introduced to the character via the Horror Business 7″ which featured that smiling, skull, face with arms folded across its chest. From there, its appeared on other records and inserts and has been a major part of the band’s marketing and presentation.
NECA has done multiple versions of the character as an action figure, but up until now, they’ve been in the company’s retro cloth line. The retro cloth, as the name implies, is basically a throwback brand similar to Mego figures sporting soft goods clothing. Two standard versions of The Fiend (we’re going to go with that name for the rest of this post since that’s what is on the box) were released: one in black and one in red. I passed on both as the retro cloth line isn’t really my thing, but I could not resist the third version which was a Christmas variant with Santa hat and sack. It’s a fun display piece, though the quality of the figure did nothing to sell me on the retro cloth line. After only a year of owning the figure, displaying it Christmas time then putting it back into its box for the rest of the year, the ball joint in the neck basically deteriorated and crumbled like Play-Doh left out in the sun. It was bizarre, and the head just fell off when I put the figure out last Christmas. I glued it back on, but it was a bummer and now I’m afraid to touch it.
NECA apparently decided that another retro cloth release would no longer suit the property, so it gave the figure an upgrade. NECA’s Ultimate line of action figures is basically their flagship format. A five-panel window box, upgraded articulation, and lots of accessories and optional parts. That was the format chosen for this new take on The Fiend and I figured I’d give it a whirl. It comes in a simple, but attractive, black box with the skull face dominating the front. The band’s logo plus The Fiend from the Horror Business cover are on both spines with product shots on the back and inner flap. The figure is viewable through the window as well as the accessories included. Did fans of the character need yet another version in plastic? Time to find out.
The Fiend stands a tick over 7″ and sports a soft goods hood and robe. The robe is sleeveless as the arms of the figure feature sculpted sleeves. The legs are sculpted to feature work pants and shoes while the torso is completely blank since its always hidden by the robe. The hood clasps under the figure’s chin and it’s a bit of a pain to undo, so I wouldn’t bother. By keeping the hood separate from the robe, it’s easy enough to pop the head off and remove it from the hood if desired. The hood and the material extended off of it that drapes over the shoulders is wired and poseable as is the hem of the robe. It feels like good quality soft goods, but is a bit frumpy. I don’t think anything is reused from the retro cloth figure, so it’s not an issue of NECA shoe-horning old soft goods to suit this figure, but the robes are so frumpy that the figure basically loses its neck. He looks like a shriveled up old guy, and maybe that’s what NECA was going for since it is a skeleton, but I wish the head appeared to sit higher.
As for the face, NECA opted to exercise some of its creative license. They basically did it a full skull and retained the eyes recessed deep in the sockets. It’s scratched up and dingy looking and sculpted in a bone white covered in gray paint with a black wash. It’s certainly not bad looking, and the teeth and “smile” basically match the source material, but this is very much a “what would this character look like if it was real?” It juxtaposes with the hands, which still look like black gloves with bones painted on them, and I don’t know that this is the approach I wanted. As an alternate head – sure, but for a standard head I’d have preferred the retro cloth approach which is a black head with the face painted on in white. And if they were going for this more realistic approach, why not include boney hands? And it may only be me, but for some reason, when I look at this face I see Rudy Giuliani. I think it’s the eyes, I don’t know, but if you see it now then I apologize because what has been seen cannot be unseen.
There are additional heads and accessories to play off of them. The second head, is basically the same as the first, but with the eyes shifted to the right. It’s fine, but I’ll never use it. The third head is closer to what I wanted, but has some weird shading on it that ruins it for me. It’s very similar to the retro cloth head that came with the Christmas figure I have, just smaller to suit the scale of this release. It’s all black and the face is painted on with white, but it has gray and crimson shading over the left eye and in the teeth. I’d use it if it wasn’t for the shading which does nothing for me. The whole appeal of the character, for me, is how the white face appears to be floating in darkness in the hood and obscuring the face with shading destroys it. If you like it though, then it’s here.
For hands, we get two sets: relaxed and gripping. The gripping hands have the superior vertical hinge which comes in handy for the two daggers included. The daggers are identical, except that one has some blood painted onto the tip. The blood is basically just there, it doesn’t stand out on a shelf, and I’m left wishing they had included a dripping effect piece instead. There’s also a lit candlelabra which looks fine, but it strikes me as a nod to American Psycho and I could not care less. Mine is also slightly warped, though I bet I could straighten it out with some hot water. The flames are painted on and I think it would have looked better if done with translucent plastic. We also get a tombstone with the Fiend’s face on it and the band’s logo plus their born year and Lodi, NJ. No death year yet. It’s fine, though it looks and feels like a 3D print so it feels a bit cheap in hand.
By far, the best accessories included with this figure are the LPs. NECA included three, cardstock, LPs that I guess The Fiend can just hold and admire. They are based on actual releases by the band and include Horror Business, Earth A.D./Wolfsblood, and Die Die My Darling. As a longtime fan of the band, I do feel it is my duty to point out that the Horror Business here is inaccurate. That was never released in a 12″ format, but I’m going to give NECA a pass because doing an in-scale 7″ jacket would be a lot harder. And what they did here turned out way better than I could have expected. The track-listing is even readable on the rear of the release and the little details pass the eye test. The only thing missing are the actual records which would have really put them over the top. Even without that, I still dig these and they render the other accessories irrelevant for me because there is no way my figure isn’t going to be holding one, or all, of these in my display.
By moving The Fiend to the Ultimate format, we should see a benefit to the articulation and that’s mostly true here. The head is on a double ball peg, and even with the hood, there’s little in the way of restrictions there. You won’t get a ton of range up and down, but there’s probably enough. The shoulders are hinged ball pegs and since the robe lacks sleeves they’re not hindered by the soft goods. The elbows are NECA’s special, unusual, double hinged peg that swivels above and below the elbow. They bend past 90, but the figure does lack the range in the arms to do a proper arms-crossed pose. I feel like that pose is so iconic and important to the character that NECA should have found a way to make that happen, maybe with a separate arms piece like the cross-arms pose we get from Bandai all of the time.
The torso of the figure features a diaphragm joint that basically just allows for some rotation. Strangely, there’s no waist joint of any kind. The hips are ball and socket joints and since there is no need for a diaper piece the range is terrific and your Fiend can kick forward, back, and do splits. There’s a thigh twist as well and at the knees we get a single hinged joint that can swivel a bit. I have no idea why they decided not to use a double-joint. Is it something we’ll need? Probably not, but why not have it anyway? The ankles hinge and there is a rocker so standing this guy is easy enough. And we do have the aforementioned wired robe which does work well.
Is NECA’s Ultimate take on The Fiend a much needed upgrade over the retro cloth release? Yes and no. I prefer this action figure to the Christmas one I have in almost every way, but I have to concede, if you just want a Fiend that looks like the character depicted on the box art then you may be better off with the retro cloth version. That’s entirely due to the approach taken with the figure’s head. It’s a shame NECA didn’t account for this. We get three heads, but not one of them is just a simple black and white? That aspect of the figure annoys me, but doesn’t entirely ruin it. It’s possible this is just capitalism at work and NECA plans on including such a visage with the next version of the figure that is almost guaranteed to come. It will probably have a red robe and maybe it will come with different record jackets. I don’t really want a red-robed version, but would I get one if it came with the accessory I want? That remains to be seen. For now, we have this one and it’s okay. To my surprise, I find myself liking the Super7 Ultimates! release of Papa Emeritus a little more so now I’m wondering if Super7 will give The Fiend the same treatment. At least this one is cheaper at around $36-$38 so even if Super7 does give it a shot, I don’t feel confident they’ll get $55 out of me.
Interested in more NECA or rock n’ roll stuff?
Misfits Holiday Fiend Figure from NECA
2020 will be remembered for a lot of things, many of them not good. One non-negative aspect of 2020 that will be memorable for me was that it was the year I really got back into toy collecting. Most of that was courtesy of NECA toys and their various Teenage Mutant Ninja Turtles lines. Those…
Keep reading
Super7 Ultimates! Ghost – Papa Emeritus I
I feel like I have a pretty interesting relationship with the band Ghost. They came to my attention in 2010 with their album Opus Eponymous and came at the recommendation of one of my friends. It wasn’t so much a recommendation based on quality, but more of a “You have to hear this,” because it…
Keep reading
The Misfits – Ultimate Song Ranking
Happy Halloween! I don’t know about you, but for me Halloween is synonymous with The Misfits – the horror punk band out of New Jersey fronted by Glenn Danzig from approximately 1977-1983. It has been that way ever since I discovered the band when I was in middle school thanks to a revival in the…
Keep reading
The Nostalgia Spot 