I feel like I need to take credit for the existence of this wave of Disney Mini Figures. It wasn’t that long ago I wondered why the flood gates never opened following the 2016 release of Cinderella’s Castle from Walt Disney World and the wave of mini figures that preceded it. Just days after that post Lego announced a new set based on Steamboat Willie was incoming. Then just days after that a second wave of mini figures based on Disney properties was announced! My timing could not have been better.
Obviously, I am joking about the credit thing because these were in the works for months, if not years, before being announced. I just ended up having extremely good timing where Disney and Lego are concerned. When that Steamboat Willie set was released I snatched it up and shared my thoughts here on the set as a whole. Now I’ve tracked down the entirety of the mini figures that followed in May and I’m ready to tell you all about them.
Series 2 for the Disney brand of Lego mini figures largely went as expected. Several characters complement the characters from series 1 while others are just logical inclusions based on their level of popularity. There are 18 figures in total, two of which are variants of previously released figures. Each comes in a blind bag, but those willing to stand around in-store feeling up bags should be able to reasonably ascertain who’s who without purchasing doubles of any character. Below, I’ll talk about things to look for when hunting as I found this series pretty easy. The only way you’ll end up with doubles is if you get impatient, which is easy to do as no one is 100% comfortable feeling-up bags of toys in a store while strangers look on. You just have to suck it up and feel like a dork for a little while. Each figure retails for 3.99 in most places, but specialty shops may tack on a buck or two and each figures comes with at least one accessory.
1928 Mickey and Minnie Mouse
So these two should look familiar. These are the same figures included in the Steamboat Willie set. It’s not at all surprising to see Lego save a couple of bucks by doubling-up here, and for those not interested in that set at least they can get a Minnie and Mickey this way. The only difference between the two is that these versions use a black, white, and gray color scheme while the Steamboat Willie figures utilized silver instead of gray to make them seem extra special. I’m a bit of a purist when it comes to my toys so I actually prefer this color scheme. Mickey and Minnie both feature a removable hat affixed by a peg with Minnie even coming with an extra in case one gets lost. Mickey sports his iconic steering wheel while Minnie gets a buoy. It’s a pretty lackluster accessory for Minnie as this is also Lego’s go-to piece when creating a toilet seat. Why not give her the ukulele or bird? These two are super easy to find though because of their unique head sculpts. And distinguishing between Mickey and Minnie is also simple given that giant steering wheel. I came across many in my search so they may even be packed slightly higher than other characters, or it could be that many people are leaving them behind. I kind of wish I had extras of the series 1 Mickey so I could get extras of these ones to make a classic, colored, Mickey by combing the black and white head with the colored body.
Coming in from the Disney Afternoon is Huey, the red-clad nephew of Donald Duck and great nephew to Scrooge McDuck. Huey is based on his classic look and the one most commonly associated with the original DuckTales from the 80s. He uses Lego’s kid legs which are immovable, has the “duck butt” debuted with Donald and Daisy, and removable cap. His accessories include the Junior Woodchuck’s Guide Book and a compass. When trying to find him in a blind bag, look for the book which comes in two pieces and is pretty distinct. Huey looks pretty great and the head sculpt is quite nice. Mostly, I am delighted to see some love for the Disney Afternoon. And naturally, you can’t have Huey without his brothers…
Dewey (and Louie) is exactly the same as Huey only the red parts are blue. It’s another way for Lego to save some money and it makes sense as the triplets are identical in the source material (maybe this is why Lego decided on 80s DuckTales instead of the new one). The only other thing differentiating Dewey from Huey is his slingshot accessories. He comes with two, and it’s what you need to look for when feeling up a bag. It may be a small piece, but it’s actually pretty distinct even through a bag.
The last of the nephews and the one clad in green. I probably should have just put all three together, but oh well. He’s the exact same as his brothers, only he comes with two flashlights. They utilize the lightsaber hilt from Lego’s Star Wars sets and a stud for the light portion. Again, pretty easy to figure out as once you’ve identified that you’ve got one of the duck nephews you just need to find either a stud or the handle as Huey and Dewey do not have a similar piece.
My personal favorite of this wave is Scrooge himself. Based on his DuckTales look, he’s sporting his blue coat and top hat while also featuring a cane and his number one dime (plus an extra cane for good measure). His head sculpt looks great as it features his glasses molded right onto his bill. They’re colored instead of transparent, but look fine. His cane is missing a handle though, and the red stripe on his hat is molded on, but not painted. As a result, he could have been better, but still looks pretty rad to me. When hunting for Scrooge (who seems to be popular and a touch harder to find as a result) you can safely just key-in on the two walking sticks. Surprisingly, he’s the only figure with a perfectly straight, round, piece like that. If you want further assurance, his hat is also pretty easy to find and he’ll have the duck butt piece as well.
Chip and Dale
The mischievous duo of Chip and Dale make their Lego debut. While they’re obviously not in scale with the other characters, I still consider it a positive to receive such an iconic and classic pair. Chip and Dale utilize the better kid legs which are able to move like conventional mini figure legs as well as unique sculpted heads like the other mascot characters. The only way to distinguish between the two is their accessories. Chip comes with an acorn that’s disassembled. Through a bag it just feels like little, tiny, pieces. Dale, on the other hand, comes with a sack (a nut sack?) that’s pretty distinct and should be a reliable way to separate the two rodents. Lego also took some creative license with the pair and made Dale lighter in color. I’m not sure if this is a popular occurrence in the merchandise world, but I had not encountered it before. Again, purist here, so I’d prefer the two look the same, but it’s not a big deal. I do wish they had a tail piece instead of a printed one on their back. Overall though, they look plenty cute and the designs didn’t suffer in the transfer to 3D.
The first series of Disney mini figures surprisingly avoided the princess characters, but this one did not. And how could Lego ignore the incredible popularity of Frozen, especially with a sequel coming later this year? Elsa comes clad in her classic ice blue dress. She has a cape, which I suppose is supposed to be the transparent parts of her dress, but just looks like a cape here. It’s a dark blue and covered in printed snowflakes. She also has an oversized snow flake, a braided hair piece that takes her hair over one shoulder, and a head piece with two facial expressions: a smile and a winking smile. Her base is a trapezoid like piece to account for her robes. Maleficent utilized a similar piece in series 1, but the difference here is that there’s some slight molding on the front to provide a hint of legs underneath – a nice touch. It’s that base that makes it easy to narrow down the other figures when looking for them as she shares that piece with Anna and Jafar. To further separate her from her sister just look for the snowflake. It may be a bit of a dumb accessory, but it does make it easy to find Elsa. Plus, she really didn’t have anything else in the film going for her. The cape looks silly, but the overall likeness is fine and sure to please your daughter (it did mine).
Anna comes sporting her traditional look when she sets out to find her sister. Her body sculpt is the same as Elsa’s except her hair features two braids instead of one. She even has a smirking face and winking face as well on her head piece. Her cape looks much better by virtue of it being pretty simple making her my preferred Frozen sister. Her accessory is also a bit more fun, though also not tremendously important to her character as it’s just a lantern. It’s a unique piece though making it easy to find Anna in a blind bag. Once you found the leg base piece, just look for the lantern and the cylinder that goes inside of it.
Series 1 of the Disney mini figures included Aladdin and the Genie, so why not Jafar in series 2? We need more bad guys, so the sorcerer is welcomed. He has his standard look and comes with his large serpent-topped staff, the piece to look for when hunting. He also has a cape, shoulder pads, and his rather large hat. His head only features one expression, but it’s not like Jafar needs anything aside from his scowl. Characters with a lot of distinct characteristics in their clothing seem to work best, and it’s why Jafar is one of the best figures in this series. Like Anna and Elsa, he also uses the robed base and the abundance of accessories make him a cinch to figure out. The only thing missing is a little parrot stand-in for Iago.
Another princess, this one also pairs nicely with Aladdin. Jasmine is a conventional figure with all of her clothing being printed on. The sides of her body are blue which makes her look rather weird at certain angles, but this is how Lego does this sort of thing to make its figures actually look less blocky. She comes with a bird as seemingly all Disney princesses are capable of conversing with animals. It’s not a particularly exciting accessory, but I guess giving her a tiger would have been a touch excessive. When on the hunt for Jasmine you basically have to use process of elimination as her figure is rather plain. From there, look for the hair which is in a long braid and is rather soft and pretty easy to locate.
Arguably the easiest one to figure out when feeling-up the bags is Hades. That’s due to his unique leg-piece which is similar to Ursula’s from series 1. It’s molded to feature his robes which have a life of their own in the film he’s from. And if for some reason you can’t locate it, the little flames are also pretty easy to fine. Hades has a great look and the flames on his head are actually glued on. He’s another welcomed bad guy, and while I’ve never been a fan of Hercules, I’ve always liked Hades in spite of his detestable voice actor. He’s one of the better looking figures in this set as the bad guys really stand out.
Since we got Hades, it’s no surprise to see Hercules in this wave as well. He’s a traditional mini figure who features two expressions, two swords, a shield, cape, and hair piece. The circular shield is pretty easy to fine, and the two swords stand out as well. I already mentioned I’m not much of a fan of the source material here, but for what it’s worth Hercules looks pretty good. He’d be hard to mess up.
Coming in from the always popular Nightmare Before Christmas is that lovable scarecrow Sally. Sally is another conventional mini figure with no additions aside from her hair. And it’s that hair that makes her a dead giveaway when searching through bags as it’s huge and spoon-shaped. Which is good because her little flower accessories, which have to be assembled, are somewhat nondescript when on the hunt. Otherwise, her features are achieved entirely via screen-printing as Lego opted not to give her any cloth pieces, which feels like a mistake as her model in the film has such lovely textures that this figure just can’t capture. She’s one of my least favorites as I find this depiction a little boring.
Naturally, if you’re going to include Sally then you need to include Jack. He’s able to “wow” more than Sally by virtue of his easily translatable look and additional pieces. He has his bat-like bowtie and cloth suit tails. His accessory is a Christmas gift, I believe the one that houses the shrunken head in the film, only this time it’s filled with little circular snowflakes. The cubed box is the item to look for when figure hunting and should stick out like a sore thumb. Jack’s face looks great and overall it’s hard to find fault with this one. Lego could have gone with a unique head piece, but I think the standard one works just fine for the character. After all, part of the charm is seeing the characters converted into the Lego style.
Serving as a compliment to last summer’s Incredibles 2 Lego sets is this version of Edna Mode. A previous one was available, but it was rather lackluster. This one uses the Lego child body and an oversized hair piece that features Edna’s glasses to really bring her look alive. She also comes with a pair of coffee mugs and what I assume is a purse. By virtue of the fact that she shares a base with the nephews, you’ll want to try and find that hair piece. It’s bowl-shaped and quite deep so you shouldn’t worry about confusing it for one of the caps included with the duck boys. Mostly, use process of elimination as the duck boy heads are easy to distinguish and the duck butt is as well. You shouldn’t worry about confusing her with the chipmunks as their legs can move and it’s rather easy to actually move them through the bag without fear of tearing it open. I’m not much of a fan of the Incredibles or this character, but she looks good for what Lego is shooting for.
Lastly, we have Frozone. It was surprising to see him excluded from the Lego sets from last year, but I guess that’s because they were saving him for this wave. Frozone comes with two ice pieces that his hands can grip as well as a saucer meant to serve as one of his ice sleds, I suppose. That saucer is what will make him easy to find as it’s large and flat. Lego opted to screen print his cowl on rather than make it a separate piece and it works considering how tight his costume is supposed to fit. The little sled piece makes him fun to pose, and overall he’s a logical inclusion that looks great.
And that concludes series 2. Will there be a series 3? I sure hope so as Lego still owes us a Goofy. How he managed to avoid inclusion in this wave is beyond me since he really should have been in the first with the other Disney originals. Aside from him, Pluto would be wanted even if he was depicted as a mascot rather than a four-legged dog (maybe make him a unique figure for another Disney park set?!) and Lego has yet to tackle any of the inhabitants of the Hundred Acre Woods. The Disney Afternoon is also teeming with potential figures, the most-wanted likely being Darkwing Duck. And if Lego insists on reusing its Mickey head well there’s a whole bunch of other outfits to explore. In short, a wave 3 would be easy to fill out and is probably likely to sell as well as any other series of mini figures, if not better, so hopefully it happens. I’m not ready for it to end.