NECA Gargoyles – Ultimate Goliath

2021’s most anticipated figure release is here!

It was nearly 6 months ago that NECA unveiled one of its newest licenses for 2021: Gargoyles! I was incredibly pumped at the time to see that NECA had acquired Gargoyles because the license had so much potential. The show was basically a cult hit in the 90s often characterized as Disney’s answer to Batman: The Animated Series, but Gargoyles truly was its own thing. Rooted in Shakespearian lore with a fantastic backstory, the time-displaced clan of mythical creatures found themselves the protectors of New York City from enemies both current and from the past. And if you’re going to start a line of action figures based on Gargoyles, well, who else are you going to start with other than Goliath?

When NECA unveiled the license acquisition they showed off Goliath with it. The midnight post on Twitter showcased the fearsome creature and the direction the line would head. He was available to preorder the next day with a July release date attached, which slipped to August, to September. That’s 2021 for you, but after a really not so long wait all things considered, I’ve finally managed to secure a Goliath action figure from my local Target.

He lives again!

Goliath is a big boy and he comes in a big box. The Ultimates styled packaging from NECA is bigger than even the Chrome Dome box. It has less to do with the figure’s height and everything to do with those wings. The front of the box features some artwork of Goliath which I believe is stock as it looks rather familiar while product shots can be found on the back and interior. The back also has a bio of the series that surprisingly is not the same as the narration from Keith David that was attached to the second season’s intro, though it’s in the same vein.

That’s a lot of man…stone beef.

The packaging is fine, but what I’m after is that figure inside. Freeing Goliath from his confines is rather painless as there is not an abundance of ties on him. Once out he’ll need to have his tail and wings attached. Figuring out how tall he is isn’t straight-forward since gargoyles have unique lower, leg, anatomy. With his knees bent in his natural standing posture he’s about seven and a half inches tall. His anatomy is sculpted in a more realistic manner than the cartoon. His flesh features veins and thick muscles. It’s cast in a very light shade of purple, almost gray, with a darker purple paint wash over it to really bring out the musculature. The wash is used more liberally on the face to darken around the eyes and lips. His default expression is a stern one with visible pupils that definitely reads as “Goliath.” The belt and loincloth he wears are cast in a soft plastic so they’re quite flexible. The only place the wash isn’t visible is on the tail which is done in a rubber material so that it can bend. It looks rather plain in comparison to the rest of the figure, but it’s always going to be behind him so it’s not something I take issue with. The finer painted details, like the eyes and claws, are all clean. Overall, this is a striking figure in-hand.

I think most will be happy with the scale here.
The wings can go really wide, or really deep, with nothing in between.

Let’s talk about those wings though, for a second. They’re huge! They measure 20.5″ from tip to tip when spread out so this guy will need a big shelf. They’re made of a very rigid plastic, likely ABS, and painted purple and black. The membrane inside the wings is well-sculpted and the detail shows in natural light. Even though the plastic is a bit lighter than some others, they still add considerable weight to the figure and, combine that with their size, will just be a constant battle when posing the figure. In terms of making wings that look good, I’m not sure NECA could have done much better. Bendy wings would have probably too resembled one of those Halloween store rubber bats, and fabric wings would have clashed with the looks of the rest of the figure. What people will miss with these though, is just an alternative. They’re great for dramatic posing, but not for casual or even hand-to-hand combat poses. Goliath could use some partially folded wings, though what I see most requested are the folded, “cape,” styled wings the character would often sport with the two claws at the peak of the wings crossed under his chin and clasped together. NECA likely knows this, but didn’t want to jack up the cost too high on a new IP. Hopefully, something like that follows in the future, and when it does, may I suggest they use the same material that they used for the cape on Shadow Master Super Shredder?

Disc stands help with posing.

Okay, wing talk is complete, for now, so let’s talk articulation. Goliath’s head sits on a ball-peg. It’s not a particularly large ball though, and he doesn’t have articulation at the base of the neck. Combine that with his long, sculpted, hair and wings and you end up with a head that can’t do much. He can look forward and straight down okay and there’s a little tilt too. Rotation is a challenge due to the hair which will interfere with the wings, but if you work at it you can get him to look to either side. It just may require removing a wing, turning the head, and reinserting it. At the shoulder we have ball-hinges and he can almost raise his arms to a horizontal position. The shape, and slope, of his shoulders prevents him from raising his arms out to the side any higher, but he can rotate forward and back just fine. Past that is the biceps swivel and double-jointed elbows which all work fine. The hands peg in and feature hinges, though the right hand on my figure is very loose. The hand hasn’t fallen out, but it takes minimal effort to do so. In the diaphragm is a ball-joint that gives the figure some tilt and rotation. He can even crunch forward a decent amount. There’s a waist twist below that and the new styled double-ball leg joints sit below that.

He can make a scary fist.

In the legs, things get interesting. Goliath has the usual thigh twist, but below that is a single-hinged knee. It can bend back to about 90 degrees, but it can also swivel. It looks to just peg in to the thigh, and I like how the knee cap is sculpted over it. At the ankle, we get the usual hinge and rocker and then beyond that is a toe hinge. Gargoyles have interesting anatomy in that they basically stand on their toes. There’s some slight twist, or rocker, action to the toes, but I can’t tell if that’s intentional or just some play in the joint. They need to be tight though, and they pretty much are, though nothing was overtight on my figure. At the tail, there’s a peg and a hinge so you can move that thing all over the place. It can kind of help with getting the figure to stand, though it’s not really strong enough to help out as much as I’d like. The wings peg into the figure’s back and they’re actually hidden a bit by the hair, which is nice. They can rotate and also feature a hinge that’s ratcheted. It makes an awfully scary noise when positioning it, but they seem fine. Because they’re wide open, there isn’t a whole lot of versatility to them, but at least you have some options, particularly if you go with a flying pose.

If you prefer, you can have your Goliath be studious.

Achieving such a pose though has proven to be a challenge. Standing Goliath is not easy. There’s just enough looseness to his thighs and knees that the weight of his wings pulls him back and the tail doesn’t help out much. I did have some success using two NECA disc stands as each foot has a peg hole. What I hoped to use though was a flight stand. I only have tried two, a SHF stand and a NECA one, and neither worked. The SHF stand features a crotch piece which just doesn’t fit Goliath while the NECA one was rather frustrating because there’s very little range in the actual “grabber” piece. I at least got him into that one, but he looked stupid. What I didn’t try was the stand that came with the video game Baxter, but since Goliath can’t look straight ahead for a true flying pose (technically, gliding, as Goliath would remind me) I didn’t bother. I have a MAFEX stand and a Bring Arts one, but I feel both won’t be able to handle the weight. I’ll have to look elsewhere for something that works, or hang the figure from the ceiling with fishing line or something.

Clearly, the book is a prop to make him look smart because no one is reading that.

Goliath, likely owing to his size and NECA’s desire to keep the price down as much as possible, comes with just a handful of accessories. He comes packaged with two, open, style-posed hands that he can swap for fists. There’s also another left hand that’s more of a gripping hand which works well for his included book. There’s no title on the book, but it appears to match the one he read on werewolves from the series. He also has a jalapeno pepper, which is basically an in-joke for fans. Lastly, there’s a second head. When I first saw this figure unveiled, I figured NECA would go with a faceplate system to change expressions, but he actually has a whole, new, head. The hair is the same, but the face is a more fearsome, yelling, expression with blank eyes. I think, given the limited wing options, I’ll display Goliath with this face instead of the calm one, but both look great. The alternate head is well-painted and well-sculpted with each individual tooth brought out.

Snack time!

The accessory count is low, but Goliath isn’t really a character screaming for a lot of accessories. The optional left hand works just fine with the included book and pepper and he can be positioned with it in a fairly convincing manner, should you wish. He’s a bit limited in terms of more fearsome posing. Take the picture on the front of the box, that crouched pose isn’t really one he can do. He also can’t do the on-all-fours pose the gargoyles sometimes assume in the show. At the very least, he would need some neck articulation to pull that off. This isn’t terribly surprising though as NECA always prioritizes the aesthetics of their figures over posing. And I’m largely in agreement with that approach, though I do think they can do better here. I would like to see them figure out how to get a true gliding pose as well. They could possibly do so with neck articulation, or with different hair-shapes or even a hinge in the hair.

I look forward to getting some friends for this guy, and some foes.

Goliath is a good first effort from NECA for Gargoyles. I don’t think he’s quite the homerun that I had hoped he would be, but I think some of that will be addressed in time. The limited wings makes him feel like he’s not really an “Ultimate” edition of the character, but if I’m right and that’s a product of NECA keeping costs down, then maybe that will change in the future. NECA indicated the response to Goliath was beyond their expectations so the fanbase is there and I’m willing to bet its willing to spend a bit more to get more. The only real issue is, with costs soaring across the industry, will NECA be comfortable charging $40 or $50 for a figure in this line? That remains to be seen. For now, we’ve only seen the next two releases: Demona and Thailog. Both appear to have one set of wings so it may be awhile before we see something else. Finding a home for this line is going to be a challenge, but it’s a challenge I’m ready to welcome. I’m all-in on Gargoyles, so NECA, keep ’em coming!


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: